• 한국분무공학회지
• /
• 제27권1호
• /
• pp.18-25
• /
• 2022

Hot-firing tests were performed to experimentally confirm the effect of the eigenmode in the fuel-air mixing section on combustion instability by changing mixing section length, inlet mean velocity, equivalence ratio, and swirler geometry. A premixed gas composed of air and ethylene was supplied to the combustion chamber through an mixing section and an axial swirler. As the mixing section length increased, the inlet velocity perturbation decreased, but the combustion instability increased more. It was found that the resonance frequency of the first longitudinal mode in the mixing section shifted to the third longitudinal mode as the length of the mixing section increased. The results implied that the transition of the resonace frquency by changing the length of the mixing section might cause combustion instability.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.100-109
• /
• 1994

In this study, it is investigated that the possibility of the numerical simulation for the incineration of the hazardous material, crbon tetrachloride($CCl_4$). A 3-dimensional numerical technology is applied for turbulent reacting flows of the full-scale Dow Chemical incinerator. The calculations are made by a CRAY-2S, super computer. The major parameters considered in this study are kiln revolution rate (rpm), filling ratio of the solid waste(f), burner Injection velocity and angle, and turbulent air jets for swirl. And the employed turbulent reaction model is the eddy break-up model which is a kind of fast chemistry model assuming general equilibrium and used for a premixed flame. The calculated flow fields are presented and discussed. 1) The presence of turbulent air nozzles for swirl gives rise to visible increase of the convective motion over the region of the solid waste. This implies the possibility to enhance the mixing of the waste with the surrounding all and thereby to reduce thermal and species stratification, which were reported in a large rotary kiln operation. 2) Considering that the location of the recirculation region has a strong relation with the heating rate of the solid waste, the control of the recirculation region by the burner injection angle Is quite desirable in the sense of the flexible design of the rotary kiln incinerator for a carbon tetrachloride. 3) Finally, it is found that the eddy break-up model Is not suitable for carbon tetrachloride($CCl_4$) because this model is not incorporated the flame inhibition trend due to the presence $CCl_4$compound.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.113-122
• /
• 2002

The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.265-266
• /
• 2015

The multi-environment PDF model coupled with flamelet generated manifolds(FGM) has been developed for a large eddy simulation of turbulent partially premixed lifted flame. This approach has a capability to realistically account for the transport and evolution of probability density function for mixture fraction and progress variable with the manageable computational burden. Using the tabulated chemistry, it is possible to track radical distributions which is important to predict autoignition process with the vitiated coflow environment. Numerical results indicate that the present yields the good agreement with experimental data in terms of mixture fraction, temperature, and species mass fractions.

• 한국연소학회지
• /
• 제14권1호
• /
• pp.31-38
• /
• 2009

The effects of acoustic excitation of coaxial air on mixing enhancement and reduction of nitrogen oxides (NOx) emission were investigated. A compression driver was attached to the coaxial air supply tube to impose excitation. Measurements of NOx emission with frequency sweeping were performed to observe the trend of NOx emission according to the fuel and air flow conditions and to inquire about the effective excitation frequency for reducing NOx. Then, Schlieren photographs were taken to visualize the flow field and to study the effect of excitation. In addition, phase-locked particle image velocimetry (PIV) was performed to acquire velocity field for each case and to investigate the effect of vortices more clearly. Direct photographs and OH chemiluminescence photographs were taken to study the variation of flame length and reaction zone. It was found that acoustic forcing frequencies close to the resonance frequencies of coaxial air supply tube could reduce NOx emission. This NOx reduction was influenced by mixing enhancement due to large-scale vortices formed by fluctuation of coaxial air jet velocity.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.342-350
• /
• 2008

The effects of combustion instability on flow structure and flame dynamics with the inlet configurations in a model gas turbine combustor were investigated using large eddy simulation (LES). A G-equation flamelet model was employed to simulate the unsteady flame behaviors. As a result of mean flow field, the change of divergent half angle($\alpha$) at combustor inlet results in variations in the size and shape of the central toroidal recirculation (CTRZ) as well as the flame length by changing corner recirculation zone (CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than those of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is shorter than other cases, while the case of ${\alpha}=30^{\circ}$ yields the longest flame length due to the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it was identified that the case of ${\alpha}=45^{\circ}$ shows the largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, compared to that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons were discussed in detail through the analysis of unsteady phenomena related to recirculation zone and flame surface. Finally the effects of flame-acoustic interaction were evaluated using local Rayleigh parameter.

• 에너지공학
• /
• 제20권4호
• /
• pp.338-345
• /
• 2011

희박예혼합 가스터빈 연소기에 적용되는 스월 유동은 연소효율증가와 배기가스저감을 목적으로 적용된 것로 연소기 내 유동장의 전단층생성에 의한 재순환영역이 생성되게 한다. 이러한 재순환영역은 연소가스 재순환에 의한 화염온도와 화염길이를 낮추는 효과를 가지고 있다. 또한 희박연소에서 연소불안정성 억제효과도 있다. 본 연구에서는 모형가스터빈연소기에서 스월러를 이용하여 스월유동을 유도하고, 연소기 노즐에서 평균속도가 일정 할 때의 스월수 증가에 따른 유동장의 속도분포 특성을 분석하였으며 이때 PIV 계측 실험과 난류통계기법을 이용하여 난류인자들을 도출하였다. 스월수의 증가는 연소기 내부 유동장의 형태가 바뀌게 되고, 재순환영역의 위치가 연소기 노즐방향으로 이동하게 되어 화염길이를 줄여 주며, 난류강도와 난류길이 스케일이 감소하게 되어 에디의 크기가 작아짐을 확인하였다.

• 한국추진공학회지
• /
• 제4권4호
• /
• pp.78-86
• /
• 2000

Mach 1.8의 동축공기를 갖는 수소 난류 화산 화염의 특성을 이해하는 것이 본 연구의 목적이다. 화염길이와 연료유동의 자취에 대한 직접사진, Acetone PLIF, Mie scattering, 수치해석법을 이용하여 화염의 구조를 분석하였다. 연료의 유속를 고정시켰을 때, 공기의 유속 증가에 따른 변화를 측정하였다. 아음속 화염의 길이는 급격히 감소한 반면, 초음속 화염의 길이는 완만하게 증가하였다. 또한 연료 노즐 립의 두께 변화에 따른 화염의 소염 특성을 관찰하였다. 노즐 립의 두께에 따라 화염 안정성이 증가하였는데 이는 초음속 화염의 안정화를 위한 최소 두께 값이 존재함을 나타낸다. 유동장 구조를 분석한 결과, 연료 제트가 고압영역에 가로 막혀서 축방향 모멘텀을 잃고, 저산란 영역이 만들어지는 것을 확인하였다. 또한, 모멘텀을 잃은 연료가 재순환 영역을 따라 순환하면서 긴 체류시간을 갖기 때문에 예혼합 영역이 만들어 졌음이 밝혀졌다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.150-155
• /
• 2010

액체로켓 분사기는 추진 성능과 연소 안정성, 그리고 열유속 특성을 지배하는 가장 중요한 요소이다. 그러나 분사기 근방에서 일어나는 고압 연소 현상에 대한 근본적인 이해의 부족으로 분사기의 개발 과정은 대부분 경험적 설계방법과 고비용의 연소시험에 의존해 왔다. 본 연구는 액체로켓 연소 모델링과 관련된 최근 연구 동향들을 토대로 시작되었다. 층류화염편 기반의 난류연소모델을 초임계 압력 조건에서 나타나는 실제유체 거동을 고려할 수 있도록 확장하였으며, 극저온 질소분사, 상압 조건하의 난류제트화염, 그리고 고압의 기체수소/액체산소 동축 분사기에 적용하여 해석모델의 효용성을 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.156-161
• /
• 2005

Two and Three dimensional numerical simulations have been carried out to understand the combustion characteristics of LNG-fueled gas turbine combustor for power generation. Focus of the study was given to the influences of different fuel composition of imported and domestic natural gases with the flow conditions selected from the gas turbine operation data. Reacting flow characteristics of the swirl stabilized natural gas combustor were understood from the comparison of the two-dimensional and three-dimensional results. The thermal influences of different natural gases were very small and the fuel composition and flow rate were considered to be tuned well.