• 제목/요약/키워드: Preliminary Standard

검색결과 540건 처리시간 0.028초

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF

Development of Standard Estimates for Garden Construction: Focused on Planting

  • Hong, Kwang-Pyo;Lee, Hyukjae
    • 인간식물환경학회지
    • /
    • 제22권5호
    • /
    • pp.467-480
    • /
    • 2019
  • Standard estimates are the numerical data of a unit quantity required for construction work such as the amount of materials, manpower, and the use of equipment required and are also a basis to calculate construction costs. Unfortunately, standard estimates for construction have also been used for garden construction these days as no standard estimates for garden construction have been developed or documented until now. As a result, many problems have arisen at garden construction sites since landscape construction and garden construction differ in terms of scope, size, design and construction methods. The purpose of this study was to develop standard estimates for garden construction for proper calculation of the cost of garden construction and to ensure gardens are created following appropriate construction processes. In order to develop standard estimates for garden construction, a preliminary survey was conducted on experts to understand current issues at first. After that, a questionnaire survey was done to examine problems of construction processes and ways of improvement, and on-site inspections were conducted utilizing CCTVs at construction sites to identify the actual amount of manpower required on site. Based on the results of the surveys and on-site inspections, a draft version of standard estimates for 5 types of planting work for garden construction was developed. Developing standard estimates for garden construction will serve as a stepping stone for the transparent and proper compensation for garden construction work, which will not only contribute to addressing issues between consumers and construction companies, but also to the stabilization of market economy and job creation.

The Economic Impact of Multiple Standards in Information Communications & Technology

  • Kim, Bum-Hoan
    • International Journal of Contents
    • /
    • 제3권3호
    • /
    • pp.20-25
    • /
    • 2007
  • Standards impact the economy in various ways. Moreover, intense competition exists between a variety of standards in this era of globalization. This paper quantifies the economic effect of multiple standards in the Information Communications and Technology (ICT) sector. Thus, it identifies and specifies which standard applies when economic gains exist. A model is developed which quantifies the magnitude of the economic effect of multiple standards as compared with a single standard or no standard. The model allows for both the micro- and macroeconomic gains from standardization to be quantified. Preliminary estimates indicate that at the macro level the multiple standards multiplier is approximately three. That is for every dollar invested, the gain is on the order of three dollars. Although not as robust. preliminary results indicated a similar economic gain at the micro level Overall, multiple standards dominate a single standard. This paper applies the model to IMT-2000, an example of multiple standards, to demonstrate this approach to quantify the standards economic effect.

안면거상 및 팔자주름 개선을 위한 매선 시술 표준안 제안 (Preliminary Standard Procedure for Face Lift and Correction of Nasolabial Fold using Thread-Embedding (Maeseon) of Korean Medicine)

  • 이재철;박선희;윤정호;김정원;임창규
    • 한방안이비인후피부과학회지
    • /
    • 제26권4호
    • /
    • pp.43-50
    • /
    • 2013
  • Objectives : This study aims to suggest preliminary standard procedure for face lift and correction of nasolabial folds using thread-embedding (Maeseon) of Korean medicine(KM). Methods : Three KM practitioners of facial correction and rejuvenation who have over hundred case of practice participated in establishment of standard procedure. Standard procedure contains preprocessing, main procedure for correction, and solution of side effects. Results : Standard procedure is comprised of twelve processes with preprocessing and postprocessing. Preprocessing has position, disinfection, and anesthesia. Main process consists of overall structure correction, face lifting, nasolabial folds correction, and mesh making on cheek. Postprocess covers disinfection, edema prevention. Conclusions : To our knowledge, this is the first work to suggest standard procedure of facial rejuvenation using Maeseon. It would contribute to standardized practice in clinical fields and future study of revealing Maeseon's effectiveness.

국가연구개발사업의 사전 분석틀 표준화 연구: 연구개발 부문 예비타당성조사 표준지침을 중심으로 (Study on Standard Framework for Analyzing Government R&D Program: the case of Preliminary Feasibility Study on R&D Program)

  • 안상진;김혜원;이윤빈
    • 기술혁신학회지
    • /
    • 제16권1호
    • /
    • pp.176-198
    • /
    • 2013
  • 예비타당성조사는 대규모 신규 공공투자사업에 대한 신중한 접근을 진작하고자 1999년에 도입되었다. 사업 타당성에 대한 결론 도출 시 비용편익분석으로 대변되는 경제적 타당성 분석을 중요시하므로, R&D사업의 분석과 결론 도출에 있어서 다양한 쟁점이 제기되어 왔다. 본 연구에서는 연구개발부문 예비타당성조사에서 표준화하여 적용할 수 있는 사항을 살펴보았으며, 대표질문과 평가항목 간의 상관관계를 통하여 쟁점 도출을 표준화하는 방안을 제시하였다. 그리고 R&D효과 분류와 논리분석의 적용을 통해 분석전략을 표준화하여 R&D투자 의사결정의 합리화에 기여하고자 한다.

  • PDF

BIM기반 친환경 예비인증 평가시스템 개발에 관한 연구 -단위세대 평면에서 폐기물 최소화 평가를 대상으로- (Development of an Evaluation System for BIM-based Friendly-Environment Preliminary Certification -Focusing on the Evaluation of Minimizing Waste Material in the Apartment unit plan-)

  • 오건수;송정화;김경환
    • 디지털콘텐츠학회 논문지
    • /
    • 제13권4호
    • /
    • pp.483-490
    • /
    • 2012
  • 현재의 친환경인증평가 과정은 전통적 수작업에 의한 평가방법으로 많은 시간과 인력을 필요로 하며 평가자의 경력과 주관에 따라 평가 결과에 영향을 끼치게 된다. 이러한 문제점의 해결방안중의 하나로 평가과정을 시스템화하여 평가에 대한 객관성을 부여함으로써 평가결과에 대한 신뢰성을 높일 수 있으며 처리과정의 오류방지나 시간 절약등의 효과를 높일 수 있는 방안이 필요하게 되었다. 따라서 현재 건축설계에 도입되고 있는 BIM 방식의 설계정보를 이용하여 자동화된 친환경인증평가 시스템의 구축 가능성을 타진하고 가능한 분야에 대한 평가시스템을 구축함으로써 친환경인증평가 시스템화의 기반을 마련하고자 하였다.

식품산업 연구개발의 결정론적 평가방법에 관한 연구 (A Study on the Deterministic Evaluation Method of R&D Project in Food Industry)

  • 이종만;이근희
    • 산업경영시스템학회지
    • /
    • 제14권23호
    • /
    • pp.57-64
    • /
    • 1991
  • The preliminary, advanced and final evaluation of R&D project is essential in order to reduce loss of resource and opportunity and to minimize uncertainty resulting from optimal selection and efficient progress of R&D project. This thesis examined characteristics of deterministic evaluation, economical evaluation, and OR-approach evaluation as theoretical methodology of evaluation of R&D project applicable to food industry in Korea by using scoring method, one of deterministic evaluations. In addition, this thesis divided the evaluation factors for preliminary evaluation of R&D project into 5 groups and 30 factors on basis of the environment of domestic companies and set up the standard of each evaluation factors and contains marking-selecting way. But, generally, the evaluation model by this thesis, as the conditions of the business company environment are different to each other, contents to be set up evaluation factors, evaluation standard and decision method conforming to each the environment of the business companies with referring to as one standard of evaluation project for selecting R&D project.

  • PDF

정보화 사업의 편익 추정 프레임워크 개발 : 정보화부문 예비타당성조사를 중심으로 (Development of a Framework for Estimating the Benefits of IT Projects : Focusing on Preliminary Feasibility Study)

  • 이충훈
    • 한국IT서비스학회지
    • /
    • 제17권3호
    • /
    • pp.101-115
    • /
    • 2018
  • In order to promote the IT business efficiently, the Preliminary Feasibility Study has been conducted since 2004. It is to verify the feasibility of a large-scale IT project in advance and to determine whether to reflect the budget. It is more difficult to analyze the benefits of the IT project than other projects, because the IT project is carried out by combining tangible and intangible assets and human resources. For this reason, the Standard Guideline for Preliminary Feasibility Study in the IT field suggests a framework to support in estimating the benefits of the IT project. However, it includes the following problems : 1) level discrepancy among the benefit categories, 2) lack of types of benefit items, 3) no consideration of benefit inducing factors. So the framework is facing a low utilization. This study develops a new framework through a three-step research process. The new framework can be used not only for preliminary feasibility studies but also for estimating the benefits of general IT projects.

인천항 고철 하역 작업시 발생하는 비산분진 억제를 위한 계면활성제의 적용 및 기초 성능 평가 (The Application of Surfactants to the Suppression of Fugitive Dust Generated from the Scrap Metal Loading Field in Inchon Port and Preliminary Evaluation on Their Wetting Capability)

  • 이보영;유용호;정용원;김진
    • 한국대기환경학회지
    • /
    • 제17권1호
    • /
    • pp.85-96
    • /
    • 2001
  • The objective of this study is to develop the water spraying which can effectively by applied to the control or suppression of the fugitive dust generated from the scrap metal handling area at the Port of Inchon. As a first step toward this goal, we carried out some preliminary analyses on the chemical composition, physical shape, and particle size distribution of the sample dust. Next, to quantitatively investigate the effect of adding surfactants to the spraying water on the wettability of the sample dust, the Standard Sink Test was carried out for four different surfactants and at six different concentrations using the surfactants considered in this study. Results of from the preliminary analysis indicated that the main chemical component consisting of the sample dust is Goethite(FeO(OH)) and that the particles smaller than 10 ${\mu}{\textrm}{m}$ in geometric diameter occupy about 36% of the sample dust in mass. This result implies that the fugitive dust generated from the scrap metal handling area at the Port of Inchon should affect the environment nearby more than we have expected. This is because of relatively large mass percentage of the small metal particles less than 10${\mu}{\textrm}{m}$ in geometric diameter, what we may call respirable particles. As for the results of the Standard Sink Test, higher surfactant concentration tends to result in the higher wettability of the sample dust for the surfactants considered in this study, which in turn ensures the high particle collection efficiency of the droplets generated from the water spraying system. Based upon this preliminary results, studies to develop more sophisticated scaled model for dynamic test in underway and the effort to find the best surfactants as well as the optimum operating conditions are being made at the same time.

  • PDF

GIS감리절차 확립을 위한 감리방법론(GASP)엔 관한 연구 (A Study for GASP(GIS Audit Standard Procedure) methodology to set up the GIS Audit process)

  • 신동빈;맹홍주;전성자
    • Spatial Information Research
    • /
    • 제10권1호
    • /
    • pp.29-43
    • /
    • 2002
  • 이 연구는 GIS감리의 특성을 파악하고 기존의 GIS사업에 적용된 감리사례를 분석 하여 실제 적용할 수 있는 GIS감리기준, 지침 및 수행절차와 활동의 정의를 토대로 GIS사업을 효율적으로 추진할 누 있는 표준절차 정의를 통한 GIS감리방법론을 확립 하는데 목적을 두고 있다. 이에 본 인구는 감리수행을 위하며 GIS사업의 표준절차를 정의하고, 이러한 방법론을 준수했는지의 여부를 점검하는 과정을 골격으로 하고 있다. 이를 표준절차 정의에 의한 감리방법이라 하며, GASP(GIS Audit Standard Procedure)방법론이라 한다. GASP방법론이란 GIS감리를 효과적으로 수행하기 위하여 감리대상 사업의 전 공정과 예측되는 대상업무를 도출하기 위한 시범작업(Pilot project)을 수행한 후, 업무에 내한 표준절차를 사전에 정의(Prototype)하여 준수 여부를 감리하는 것을 말한다. 이는 GIS사업의 특성. 범위, 내용을 분석하여 모든 과정의 활동은 평가할 수 있는 보나 발전된 감리방법론이다.

  • PDF