• 한국지진공학회논문집
• /
• 제26권2호
• /
• pp.59-69
• /
• 2022

The use of dampers is being considered a means to improve the seismic performance of buildings. It may take considerable time and effort to find an optimal design solution since repeated three-dimensional nonlinear time history analyses are required. Therefore, a preliminary design procedure for seismic retrofit using hysteretic dampers was proposed in this study. In the proposed procedure, the amount of retrofit (required number of dampers) is estimated from the capacity curve of the building before retrofit and allowable story drift of the building. In combining the capacity curves of the building and the dampers, the deformation demand for the dampers can be easily checked against their deformation capacity. The equations to transform the device displacement to roof displacement for the combination of capacity curves are developed. The proposed procedure was applied to the seismic retrofit design of sample buildings. The study found that the estimated capacity curve was very close to the actual capacity curve obtained from the pushover analysis, which can determine an appropriate configuration to meet the required seismic performance.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.261-270
• /
• 2002

신경망은 설계자의 경험과 통찰력과 같은 비정형적 정보에 의존하는 초기 구조설계단계의 시스템화에 매우 적합하다. 초기 구조설계단계를 시작하는 시점에서는 설계정보가 매우 적음을 생각해 볼 때, 신경망 모델은 제한적인 적은 정보를 입력으로 하고 상대적으로 훨씬 많은 출력을 가지도록 설계되어야 한다. 그러나, 이러한 상황은 신경망 학습시 학습속도, 수렴, 출력 값의 신뢰성등 여러 가지 문제점을 초래한다. 본 연구에서는 이러한 문제점을 해결하기 위하여 설계 정보가 점진적으로 증가하는 흐름을 가지고 있다는 점에 착안해서 다단계 신경망을 제시하고, 이를 토대로 사장교 초기 구조설계시스템에 대한 원형을 구현하였다. 본 연구결과 초기 구조설계단계 전체에 대해서 하나의 신경 망으로 설계하는 것 보다 다단계 신경 망으로 나누어서 동일한 작업을 수행하도록 하는 것이 훨씬 유리하다.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.112-116
• /
• 2000

To determine a preliminary hull form with a minimum viscous resistance this study considers the systematic variations of full form and calculations of the viscous resistance for varied hull forms. A preliminary hull form can be determined from a parametric study of viscous resistance.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.283-288
• /
• 2011

내진설계에서 설계자가 제시해야 하는 사항은 구조물의 항복과정이 원칙적으로 연성파괴메카니즘으로 구성되는 것이다. 일반교량의 연성파괴메카니즘은 연결부분과 교각기둥 두 구조부재 중 교각기둥이 먼저 항복하도록 설계되어야 한다. 그러나 불필요하게 강성이 큰 하부구조가 사용되는 국내의 설계관행에 의해 지진하중은 크게 발생하게 되므로 연성파괴메카니즘을 확보하기가 어렵다. 이러한 문제는 내진설계가 기본설계 단계에서 수행되지 않아 발생한다. 이 연구에서는 일반교량을 해석대상 교량으로 선정하고 기본설계 단계에서 연결부분과 하부구조의 설계강도를 결정하는 내진설계를 수행하여, 이러한 설계방식으로 타설계에서 결정되는 구조부재를 변경하지 않아도 연성파괴메카니즘을 확보할 수 있다는 것을 제시하였다.

• 한국항공우주학회지
• /
• 제46권9호
• /
• pp.703-711
• /
• 2018

본 연구에서는 실기체 환경 모사(고도 모사)가 가능한 극초음속 Ludwieg tube 개념설계 도구를 개발하고, 전산유체해석을 통해 Ludwieg tube 개념설계 도구의 성능을 검증하였다. 극초음속 Ludwieg tube 개념설계 도구를 개발하기 위해 Ludwieg tube의 작동원리를 연구하였고, 도구를 활용하여 목표 성능을 만족하기 위한 Ludwieg tube의 제원을 결정하였다. 마하수 4에서 10의 유동을 모사할 수 있고, 특히 마하수 4 유동은 고도 모사가 가능하다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.265-268
• /
• 2006

The preliminary design of a deep-sea injection system for carbon dioxide ocean sequestration is performed. Common functional requirements for a deep-sea injection system of mid-depth type and lake type are determined, Liquid transport system, liquid storage system and liquid injection system are conceptually determined for the functional requirements. For liquid injection system, the control of flow rate and temperature of liquid $CO_2$ in the injection pipe is needed in the view of internal flow. The function of depressing VIV(Vortex Induced Vibration) is also required in the view of dynamic stability of the injection pipe. A case study is performed for $CO_2$ sequestration capacity of 10 million tons per year. In this study, the total number of injection ships, the flow rate of liquid $CO_2$ and the configuration of a injection pipe are designed. The static structural analysis of the injection pipe is also performed. Finally the preliminary design of a deep-sea injection system is proposed.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.375-382
• /
• 2011

최근 컴퓨터 그래픽 S/W는 변수화 모델링과 생성알고리즘을 제공함으로써 기하학적 표현의 다양성뿐만 아니라 설계자의 의도를 체계적으로 모듈화할 수 있는 여러 가지 가능성을 열어주고 있다. 이 연구에서는 이러한 가능성을 지닌 컴퓨터 그래픽 S/W기반으로 초기 구조형태를 생성하는 방법을 제시하고자 한다. 특히 변수화 모델링과 생성 알고리즘을 이용하여 다양한 설계대안을 생성한다. 더욱이 동적 그래픽스개념을 이용하여 설계자가 한편에서는 구조형태를 생성하는 동안에, 또 다른 한편에서는 상응하는 힘의 흐름도가 마련되도록 한다. 이는 궁극적으로 힘의 흐름에 근거한 합리적 초기 구조형태 설계를 지원하게 될 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.79-84
• /
• 1992

An integrated design system has as its aim the incoporation of all the design processes, such as, planning, preliminary design, analysis, detailed design (mamber design), evaluation, and drafting into an unified software system. Successful implementation such a system could lead to major improvements in efficiency by eliminating duplication of data and efforts. reducing errors, saving design time, providing management support, and so on. This study presents a methodology for an computer-integrated design system for building structures, synthesizing algorithmic procedures and knowledge based expert systems on the network database. Network database, which was designed to store all information systematically during the design processes, provides centeral communication area between algorithms and expert systems. The conventional procedural codes automate the routine design phases such as structural analysis, whereas knowledge-based expert systems support designer's decisions at the creative design phases such as preliminary design etc. The user interface with interactive and batch modes controls the design phases and manages design information and activates the algorithms and the expert systems. The concept presented in this paper will contribute to the formulation of automated design systems for building structures.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.51-58
• /
• 2020

Despite the recent growth of interest in molten salt reactor technology and the crucial role which heat transfer plays in the design of power reactors, specific studies on the design of heat exchangers for the Molten Salt Fast Reactor have not yet been performed. In this work we deliver a preliminary but quantitative analysis of the intermediate heat exchangers, based on reference design data from the SAMOFAR H2020-Euratom project. Two different promising reference technologies are selected for study thanks to their compactness features, the Printed Circuit and the Helical Coil heat exchangers. We present preliminary design results for each technology, based on simplified design tools. Results highlight the limiting effects of the compactness constraints imposed on the fuel salt inventory and the allowed size. Large pressure drops on both flow sides are to be expected, with negative consequences on pumping power and natural circulation capabilities. The small size required for the flow channels also represents possible fabrication issues and safety concerns regarding channel blockage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.132-146
• /
• 2013

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.