• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.303-311
• /
• 2007

The consumption of artificially crushed sands exceeds more than 30 percent of the domestic sand supply in South Korea, and its rate is still increasing. For the manufacture of crushed sand granites and granitic gneisses are preferred, fine fractions (i.e. sludge, particles finer than 63 microns) are removed by use of flocculation agents, and its amount occupy about 15 wt%. The sludges consist of quartz, feldspars, micas, chlorite/vermiculite, kaolinites, smectites and occasionally calcite. Among the clay minerals micas are usually predominant, and $14{\AA}$ minerals, kaolinites and smectites are rather scarce. Jurassic granites usually contain more kaolinites and smectites than those of Cretaceous to Tertiary granites, probably due to longer geologic ages. On the other hand, sludge from Precambrian gneiss does not contain kaolinites and smectites. Chemical analyses for the granites and their sludges show rather clear differences in most of major chemical components. Except for $SiO_2,\;Na_2O\;and\;K_2O$, all other components represent rather clear increase. Decrease of $SiO_2$ content is attributed to the relative decrease of quartz in the sludges. And the $Na_2O decrease is caused by a relatively stronger weathering property of albite compared to Ca plagioclase. The $K_2O$ content shows rather small differences throughout the whole samples. The increases of $Al_2O_3$ and other major components resulted from weathering processes and most of colored components are also concentrated in the sludges. Particle size analyses reveal that the sludges are categorized as sandy loams in a sand-silt-clay triangular diagram. The sludge is now classified as industrial waste because of its impermeability, and this result was also confirmed by rather higher hydraulic conductivities. For the environmental problems, and accomplishing effective sand manufacture, more fresh rocks with little weathering products must be chosen.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.112-132
• /
• 1975

When Korean family planning services began as a part of the National Policy in 1962, the annual population growth was 3.0%. This growth rate has been decreased to 2.0% during last ten year period. And it seems imperative that all hospitals, as well as related organizations, should participate in family planning in order to contribute to achieving the National goal of 1.5% population growth by 1976, the end of the Third Five Year Economic Development Plan. Nurses should be considered the most important human resources in charge of the core of family planning services in any setting. For the family planning services in the general hospital setting, nurses as a core members contribute much as change agent, motivators, counsellors, educators etc. A nurse can work with patients and their relatives when she is equipped with relevant knowledge and skills. Fur the more family planning cannot be ignored even in hospital setting where more comprehensive nursing care is needed Thus, the general objective of this study is to provide baseline data for better programming of In-service education in family planning so that effective hospital family planning nursing services can be made a part of comprehensive nursing care contributing to the national population program and human welfare. In order to meet the general objective, this study has the following specific objectives : 1. To find out the general characteristics of the clinical nurses working in Y Hospital 2. To evaluate their attitudes and practices of family planning 3. To assess their knowledge, attitudes and practices of population and family planning as professional nurses. 4. To examine and compare data collecting methods for the planning of an In-service Educational Program 5. To explore the contents to be included in this In-service Education Program. The study population randomly selected one hundred nurses working in Y Hospital A cross-sectional survey with questionnaires developed for this study was chosen for the study method. To collect reliable data, the questionnaires were distributed to and answered by the study population in a controlled situation. X²test and t-test was employed in analyzing the data. The findings of this study are as follows: 1. Y Hospital nurses had a lower ideal number of children (X=2.02) and showed no strong preference for male children, and 74% of them expressed the desire to use permanent methods of birth control 2. of this thirty Y Hospital nurses who were married 66.7% stated they were already practicing contraceptive methods. Most of them preferred male methods of contraception. 3. According to objective evaluation about knowledge of various aspects of population and family planning, respondents from collegiate programs significantly knew better the subjects on the average than did respondents from diploma programs of nursing. 4. There was a marked difference in the results of self-evaluation and objective evaluation in their family planning knowledge. It was found that the self-evaluation family planning knowledge seemed to be unreliable. Accordingly, the objective test methods appeared to be more reliable in the evaluation of knowledge levels. 5. The subject areas needed to be included in In-service education for the Hospital family planning services in Y Hospital are 1) rhythm methods, 2) tubal-legation, 3) family planning effects of contraceptives, 4) population growth, 5) demographic traction, 6) population structure and 7) infant mortality facts. In addition, 1) various oral contraceptives, 2) basal temperature method, 3) laparoscopic female sterilization, 4) interfering factors of family planning, 5) anatomy and physiology of the female reproductive organs were additional areas to be taught to respondents from 3-year diploma schools of nursing. Demographic transition was one subject area in which the four-year graduates need further study. 6. Population problems guidance and counselling in family planning instruction in the theory and practice of contraceptives should be included in future In-service Education Programs in order to provide more effective hospital Family Planning Services, stated 77.0% of the respondents.

• Journal of Gifted/Talented Education
• /
• v.11 no.3
• /
• pp.131-153
• /
• 2001

The importance of identifying gifted children during early childhood is becoming recognized. Nonetheless, most researchers preferred to study the primary and secondary levels where children are already and more clearly demonstrating what talents they have, and where more reliable predictions of gifted may be made. Comparatively lisle work has been done in this area. When we identify giftedness during early childhood, we have to consider the potential of the young children rather than on actual achievement. Giftedness during early childhood is still developing and less stable than that of older children and this prevents us from making firm and accurate predictions based on children's actual achievement. Dynamic assessment, based on Vygotsky's concept of the zone of proximal development(ZPD), suggests a new idea in the way the gifted young children are identified. In light of dynamic assessment, for identifying the potential giftedness of young children. we need to involve measuring both unassisted and assisted performance. Dynamic assessment usually consists of a test-intervene-retest format that focuses attention on the improvement in child performance when an adult provides mediated assistance on how to master the testing task. The advantages of the dynamic assessment are as follows: First, the dynamic assessment approach can provide a useful means for assessing young gifted child who have not demonstrated high ability on traditional identification method. Second, the dynamic assessment approach can assess the learning process of young children. Third, the dynamic assessment can lead an individualized education by the early identification of young gifted children. Fourth, the dynamic assessment can be a more accurate predictor of potential by linking diagnosis and instruction. Thus, it can make us provide an educational treatment effectively for young gifted children.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.34-40
• /
• 2008

Underwater seismic refraction with advanced interpretation approaches makes important contributions to shallow marine exploration and geotechnical investigations in Australia's coastal areas. A series of case studies are presented to demonstrate the recent applications of continuous and static USR methods to river crossing and port infrastructure projects at various sites around Australia. In Sydney, static underwater seismic refraction (USR) with bottom-placed receivers and borehole seismic imaging assisted the development of improved geotechnical models that reduced construction risk for a tunnel crossing of the Lane Cove River. In Melbourne, combining conventional boomer reflection and continuous USR with near-bottom sources and receivers improved the definition of a buried, variably weathered basalt flow and assisted dredging assessment for navigation channel upgrades at Geelong Ports. Sand quality assessment with continuous USR and widely spaced borehole information assisted commercial decisions on available sand resources for the reclamation phase of development at the Port of Brisbane. Buried reefs and indurated layers occur in Australian coastal sediments with the characteristics of laterally limited, high velocity, cap layers within lower velocity materials. If these features are not recognised then significant error in depth determination to deeper refractors can occur. Application of advanced refraction inversion using wavefront eikonal tomography to continuous USR data obtained along the route of a proposed offshore pipeline near Fremantle allowed these layers and the underlying bedrock refractor to be accurately imaged. Static USR and the same interpretation approach was used to image the drowned granitic regolith beneath sediments and indurated layers in the northern area of Western Australia at a proposed new berthing site where deep piling was required. This allowed preferred piling sites to be identified, reducing overall pile lengths. USR can be expected to find increased application to shallow marine exploration and geotechnical investigations in Australia's coastal areas as economic growth continues and improved interpretation methods are developed.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.57-76
• /
• 2017

Recently, consumer needs are diversifying as information technologies are evolving rapidly. A lot of IT devices such as smart phones and tablet PCs are launching following the trend of information technology. While IT devices focused on the technical advance and improvement a few years ago, the situation is changed now. There is no difference in functional aspects, so companies are trying to differentiate IT devices in terms of appearance design. Consumers also consider design as being a more important factor in the decision-making of smart phones. Smart phones have become a fashion items, revealing consumers' own characteristics and personality. As the design and appearance of the smartphone become important things, it is necessary to examine consumer values from the design and appearance of IT devices. Furthermore, it is crucial to clarify the mechanisms of consumers' design evaluation and develop the design evaluation model based on the mechanism. Since the influence of design gets continuously strong, various and many studies related to design were carried out. These studies can classify three main streams. The first stream focuses on the role of design from the perspective of marketing and communication. The second one is the studies to find out an effective and appealing design from the perspective of industrial design. The last one is to examine the consumer values created by a product design, which means consumers' perception or feeling when they look and feel it. These numerous studies somewhat have dealt with consumer values, but they do not include product attributes, or do not cover the whole process and mechanism from product attributes to consumer values. In this study, we try to develop the holistic design evaluation model based on consumer values based on three-step approach from product attributes, perceived attributes, to consumer values. Product attributes means the real and physical characteristics each smart phone has. They consist of bezel, length, width, thickness, weight and curvature. Perceived attributes are derived from consumers' perception on product attributes. We consider perceived size of device, perceived size of display, perceived thickness, perceived weight, perceived bezel (top - bottom / left - right side), perceived curvature of edge, perceived curvature of back side, gap of each part, perceived gloss and perceived screen ratio. They are factorized into six clusters named as 'Size,' 'Slimness,' 'No-Frame,' 'Roundness,' 'Screen Ratio,' and 'Looseness.' We conducted qualitative research to find out consumer values, which are categorized into two: look and feel values. We identified the values named as 'Silhouette,' 'Neatness,' 'Attractiveness,' 'Polishing,' 'Innovativeness,' 'Professionalism,' 'Intellectualness,' 'Individuality,' and 'Distinctiveness' in terms of look values. Also, we identifies 'Stability,' 'Comfortableness,' 'Grip,' 'Solidity,' 'Non-fragility,' and 'Smoothness' in terms of feel values. They are factorized into five key values: 'Sleek Value,' 'Professional Value,' 'Unique Value,' 'Comfortable Value,' and 'Solid Value.' Finally, we developed the holistic design evaluation model by analyzing each relationship from product attributes, perceived attributes, to consumer values. This study has several theoretical and practical contributions. First, we found consumer values in terms of design evaluation and implicit chain relationship from the objective and physical characteristics to the subjective and mental evaluation. That is, the model explains the mechanism of design evaluation in consumer minds. Second, we suggest a general design evaluation process from product attributes, perceived attributes to consumer values. It is an adaptable methodology not only smart phone but also other IT products. Practically, this model can support the decision-making when companies initiative new product development. It can help product designers focus on their capacities with limited resources. Moreover, if its model combined with machine learning collecting consumers' purchasing data, most preferred values, sales data, etc., it will be able to evolve intelligent design decision support system.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.129-133
• /
• 2017

Oyster mushroom is a type of mushroom that is commonly cultivated and consumed in Korea. P. ostreatus 'Suhan' is a preferred cultivar for many mushroom farmers because it has a dark pileus and thick stipe. However, as it is very sensitive to environmental conditions, farmers consistently demand an alternative cultivar. To develop a new cultivar, the parental strains KMCC01680 ('Suhan') and KMCC00478 ('Gosol') were selected from various collected P. ostreatus strains by cultivating genetic resources. P. ostreatus 'Heuksol' was developed by the method of Mon-Mon crossing between monokaryotic strains derived from 'Suhan' and 'Gosol'. Thirty strains of 174 crossed strains were initially selected by cultivation experiments. After bulk cultivation tests, 'Heuksol' was selected. The nuclear DNA profile of 'Heuksol' was similar to those of the parental strains, 'Suhan' and 'Gosol', when RAPD (random amplified polymorphic DNA) primers and UPF (Universal PCR Fingerprinting) 2, 3, and 4 were used. The optimum temperature for mycelial growth was $30^{\circ}C$ for 'Heuksol', but medium-high temperatures were also appropriate, especially $13-20^{\circ}C$. The fruiting body production per bottle (1,100 mL) was approximately 140.8 g. When compared to the control strain 'Suhan', the thickness of the stipe of 'Heuksol' was greater than that of 'Suhan' (13.5 mm vs 9.4 mm). The pileus diameter of 'Heuksol' was similar to that of 'Suhan' and the pileus thickness of 'Heuksol' and 'Suhan' was 19.7 mm and 21.8 mm, respectively. 'Heuksol' had more a productive stipe number than 'Suhan' and the pileus of 'Heuksol' was dark gray, even at high temperatures. Therefore, it was suggested that this new cultivar, 'Heuksol', could provide an alternative to 'Suhan' and contribute to the profit of oyster mushroom farms.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.55-92
• /
• 2010

In terms of labor market accomplishments, such as income, size of the company, and the matching quality between one's job and college major (specialization), a very large discrepancy is observed between the graduates from colleges located in Seoul and those outside Seoul. But, when the department average score of the Scholastic Aptitude Test (SAT) at the time of college entrance is controlled for, the discrepancy is found to be reduced to a considerable degree. In the case of wage gap, at least two third can be explained by the SAT score gap. The remaining wage gap seems to reflect the characteristics of workplace. In other words, graduates with high SAT scores enter colleges located in Seoul and thus tend to find better jobs leading to earning differences. This result that confirms the importance of aptitude test scores suggests that in the labor market, one of the major reasons behind a lower accomplishment of the graduate from local colleges is due to a lower competitiveness of local colleges in attracting the brightest students. But, this should not be viewed as only an internal problem of local colleges. This is because the growth of local economies tends to haul the advancement of local colleges in that area rather than being the other way around. The agglomeration effect in Seoul where headquarters of large corporations and financial institutions gather is the factor that has elevated the status of colleges located in Seoul since this provides highly preferred job choices of graduates. When the competitiveness of college is significantly influenced by exogenous factors, such as the vicinity to Seoul, the effort being made by colleges alone would not be enough to improve the situation. However, the central government, too, is not in the position to carry out countermeasure policies for such problems. The regional development strategy boosted through supportive policies for local colleges, such as financial support, is not based on the persuasive and empirical grounds. It is true that college education is universal and that the government''s intervention in assisting local colleges to secure basic conditions, such as tenure faculty and adequate facilities is necessary. However, the way of intervention should not be a support-only type. In order to improve the efficiency and effect of financial support, restructuring programs, including the merger and integration of insolvent colleges, should be underway prior to providing support. In addition, when the policy is focused on education recipients-local college students, and not on education providers-local colleges, the importance of regional gap in compulsory education (elementary and junior high schools) turns out to be much important as the gap between metropolitan area colleges and local colleges. Considering the educational gap before college entrance shown from the discrepancies of aptitude test scores among different regions, the imbalance between regions in terms of human resources is apparently derived from compulsory education, and not from college education. Therefore, there is a need to double the policy efforts to reduce the educational gap among different regions. In addition, given the current situation where it is difficult to find appropriate ex post facto policy measures to solve the problem of income gap between the graduates from metropolitan colleges and local colleges, it can be said that improving the environment for compulsory education in local areas is a growing necessity for bridging the educational gap among different regions.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.16-16
• /
• 2015

Ectomycorrhizal (ECM) mushrooms play a major role in plant growth promotion through symbiotic association with roots of forest trees. They also provide an economically important food resource to us and therefore they have been studied for their artificial cultivation for decades in Korea. We have secured bio-resources of ECM mushrooms from Korean forests and performed their physiological studies. To investigate the cultural characteristics, the fungi were cultured under different conditions (medium, temperature, pH of the medium, inorganic nitrogen source). More than 90% of total 160 strains grew on three solid media (potato dextrose agar, PDA; sabouraud dextrose agar, SDA; modified Melin-Norkrans medium, MMN). The rate of mycelial growth on malt extract agar (MEA) was lower than those of three media (PDA, SDA, MMN). None of the Tricholomataceae strains grew on MEA. Many strains of ECM mushrooms were able to grow at the temperature range of $15{\sim}25^{\circ}C$ on PDA, while they showed poor growth at $10^{\circ}C$ or $30^{\circ}C$. In particular, the growth rates of both Gomphaceae and Tricholomataceae were significantly lower at $10^{\circ}C$ than at $30^{\circ}C$. The optimal pH of many strains was pH 5.0 when they cultured in potato dextrose broth (PDB). Fifty-seven percent of tested strains grew well on medium containing ammonium source than nitrate source. Many strains of Tricholomataceae showed a notable growth on ammonium medium than nitrate medium. Twenty-three percent of strains preferred nitrate source than ammonium source for their mycelial growth. The production and activity of two enzymes (cellulase and laccase) by ECM fungi were also assayed on the enzyme screening media containing CMC or ABTS. Each strains exhibited different levels of enzymatic activities as well as enzyme production. The number of laccase-producing strains was less than that of cellulase-producing strains. We found that 77% of tested strains produced both cellulase and laccase, whereas 2% of strains did not produce any enzymes. The morphological characteristics of mycelial colony were also examined on four different solid media. Yellow was a dominant color in mycelial colony and followed by white and brown on all culture media. ECM mushrooms formed mycelial colonies with a single or multiple colors within a culture medium depending on the strains and culture media. The most common shape of mycelial colony was a circular form on all media tested. Other families except for Amanitaceae formed an irregular colony on MMN than PDA. All strains of Tricholomataceae did not form a filamentous colony on all media. The pigmentation of culture media by mycelial colonies was observed in more than 50% of strains tested on both PDA and SDA. The degree of pigmentation on PDA or SDA was higher than MMN and brown color was dominant than yellow color. The production of exudates from mycelial colony was higher on PDA than MMN. Brown exudates were mainly produced by many strains on PDA or SDA, whereas transparent exudates were mainly produced by strains on MMN. We observed the mycelial colonies with a single or multiple textures in just one culture plate. Wrinkled or uneven colony surfaces were remarkably observed in many strains on PDA or SDA, while an even colony surface was observed in many strains on MMN. Sixty percent of Tricholomaceae strains formed wrinkled surface on PDA. However, they did not form any wrinkle on MMN plate. Cottony texture was observed in mycelia colonies of many strains. Velvety texture was often observed in the mycelial colonies on SDA than PDA and accounted for 60% of Suillaceae strains on SDA.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.275-287
• /
• 2013

The Japanese anchovy Engraulis japonicus is a widespread species in the western North Pacific and major fishery resource. To understand the spatio-temporal variation of anchovy prey items in the coastal waters of southern Korea, the stomach contents of anchovy and the structure of the zooplankton community were analysed at three sites (Jindo, Yeosu and Tong-yeong) from July 2011 to February 2012. The main prey items in Yeosu and Jindo were cyprid stage of barnacle (>35%) and copepod Calanus sinicus (>22%) in July, respectively, while, predominant ones in Tongyeong were small copepods, Paracalanus parvus s.l. (41%) and Corycaeus affinis (22%). During this period, the dominant zooplankton were cladoceran Evadne tergestina (39%) in Yeosu, small copepod, P. parvus s.l. (28%) in Jindo and cladoceran E. tergestina (14%) in Tongyeong. The dominant prey items were barnacle larvae and copepods in summer, phytoplankton and Pseudodiaptomus marinus in autumn and P. parvus s.l. and cold water copepod, Centropages abdominalis in winter. Anchovy prefer the prey item C. sinicus (3%) over E. tergestina (39%), which was a dominant species in the catching site in summer. P. marinus (0.5%) and C. abdominalis (0.9%) were preferred over P. parvus s.l. (30%, 21%) in autumn and winter, respectively. Prey items varied with area and season in the coastal waters of southern Korea. These results suggest that the prey selectivity of anchovy showed high flexibility and adaptability in the study waters.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.322-332
• /
• 2013

This study was conducted to understand the control mechanism of Sika deer (Cervus nippon taiouanus) populations which are adapted to the natural forest areas and the semi-natural forest areas of Korea. We monitored and analyzed the behaviour patterns and habitat characteristics of Sika deers. After we released 12 Sika deers (male 3, female 9) each at the two study areas in and around Seoul under the approval of Korean government, we monitored them through our survey researchers' naked eyes from May 2011 to January 2012. We discriminated their habitat patterns to 4 major places - eating food place, drinking water place, daytime rest place, and nighttime rest place. Our results showed that Sika deer preferred the open grassland habitats for feeding and resting in daytime but the closed bushland for their protection and sleep. We also found the recommended sex ratio of adult male to female in a herd was 1 : 4~9 for breeding and they had few cubs in a herd. The average amount of food for 1 adult deer was 391.62 kg of fresh grasses and 286.90 kg of hay per year. Our results suggest that the amount of drinking water required for a deer when grazed on grasses during spring and summer seasons is 256.8 L and when a deer feeds on dry food during autumn and winter seasons, 209.8 L of water is required. From these results, we observe that the amount of drinking water was affected substantially by the moisture content of their food. This observational study must be very valuable for land managers to judge the number of deers that should be released in natural areas without high risk and to ascertain the sex ratio of large mammals including Sika deer. Therefore, we conclude that this population control mechanism study consists of efficient basic data and their values must be very effective for various purposes.