• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.815-829
• /
• 2010

In this paper, we propose a new $4{\times}4$ intra coding method by unidirectional prediction for improvement of intra-frame coding efficiency of H.264/AVC. There are $4{\times}4$, $8{\times}8$, and $16{\times}16$ intra prediction modes in the current H.264/AVC. For the $4{\times}4$ intra prediction, coding efficiency is achieved by accurate prediction with small block size in relatively complicated regions, and the $16{\times}16$ intra prediction method can predict more accurately compared to $4{\times}4$ intra prediction with only one directional information in relatively homogeneous regions. We propose a unidirectional $4{\times}4$ intra prediction method adopting a small-size prediction and one directional prediction approaches. In order to improve coding efficiency, the proposed method is conducted by $4{\times}4$ block and their prediction directions are all the same, resulting that we need to send only one directional information for each macroblock. For intra-frame coding setting, we achieve 10.47% and 1.57% coding efficiency in BD-bitrate for only $16{\times}16$ intra mode and $4{\times}4$, $16{\times}16$ intra mode, respectively.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.125-128
• /
• 2003

In this paper, we propose two methods for complexity reduction of intra prediction in H.264/AVC. One is skipping of intra prediction using inter prediction cost at current macroblock in current P picture, average of intra prediction cost in previous I picture, and average of inter prediction cost in previous P picture. The other is skipping of intra 16$\times$16 prediction using intra 4$\times$4 prediction cost and modes. As a result, complexity of intra prediction in P picture and that of intra 16$\times$16 prediction in intra prediction macroblock can be reduced by about 80~99％ and 50~93％, respectively.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.77-84
• /
• 2016

This paper proposes a methodology for creating a function based reliability prediction model. Although, there are various works for reliability prediction, one of the features of their research is that the research is based on hardware-centered reliability prediction. Reliability is often defined as the probability that a device will perform its intended function, under operating condition, for a specified period of time, there is a profound irony about reliability prediction problem. In this paper, we proposed four-phase modeling procedure for function-centered reliability prediction. The proposed modeling procedure consists of four models; 1) structure block model, 2) function block model, 3) device model, and 4) reliability prediction model. We performed function-centered reliability prediction for electronic ballast using the proposed modeling procedure and MIL-HDBK-217F which is the military handbook for reliability prediction of electronic equipment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.969-972
• /
• 2016

In this paper, we propose an algorithm of angular mode selection for high-performance HEVC intra prediction. HEVC intra prediction is used to remove the spatial redundancy. Intra prediction has a total of 35 modes and block size of $64{\times}64$ to $4{\times}4$. Intra prediction has a high amount of calculation and operational time due to performing all 35 modes for each block size for the best cost. The angular mode algorithm proposed has a simple difference between pixels of the original image and the selected angular mode. A decision is made to select one angular mode plus planar mode and DC mode to perform the intra prediction and determine the mode with the best cost. In effect, only three modes are executed compared to the traditional 35 modes. Performance evaluation index used are BD-PSNR and BD-Bitrate. For the proposed algorithm, BD-PSNR results averagely increased by 0.035 and BD-Bitrate decreased by 0.623 relative to the HM-16.9 intra prediction. In addition, the encoding time is decreased by about 6.905%.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.91-94
• /
• 2003

H.264/AVC is the upcoming video coding standard of ITU-T H.264 and ISO MPEG-4 AVC. The new standard can achieve a significant improvement up to 50％ in compression ratio compared to MPEG-4 advanced simple profile. In this paper, we propose the novel intra prediction scheme to speed up intra prediction process in H.264/AVC decoder and show the hardware architecture for it. The proposed scheme uses the concurrent processing of the 4$\times$4 intra prediction, which is based on that some 4$\times$4 block pairs in a 16$\times$16 luma block can be processed concurrently. The proposed scheme can reduce intra prediction time by 33 ％.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.225-227
• /
• 2009

International standard specification, H.264/SVC improved from H.264/AVC, is set up so as to promote free use of huge multimedia data in various channel environments.;H.264/AVC is a international standard speicification for video compression, adopted and commercialized as standard for DMB broadcasting by JVT of ISO/IEC MPEG and ITU-T VCEG. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding. Among prediction technologies, 'inter-layer intra prediction' is to use co-located block of up sampled sublevels as a prediction signal. At this time, application of interpolation is one of the most important factors to determine encoding efficiency. SVC's currently using poly-phase FIR filter of 4-tap and 2-tap respectively to luma components. This paper is written for the purpose of analyzing encoding performance according to the interpolation. For this purpose, we applied poly-phase FIR filter of '2-tap', '4-tap' and '6-tap' respectively to luma components and then measured bit-rate, PNSR and running time of interpolation filter. We're expecting that the analysis results of this paper will be utilized for effective application of interpolation filter. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.1-9
• /
• 2010

In this paper, the novel architecture of Intra-prediction & DCTQ hardware, which can process for the Full HD image($1980{\times}1088$@30fps) in realtime, is proposed. The cycle optimization method for the overall cycle of prediction, transform, scaling, descaling, and reconstruction is proposed. To reduce the cycle in the $4{\times}4$ prediction, the quantization process is performed during the prediction cycle and pre-selection of 2 modes among the 9 modes is performed to reduce the hardware area. To reduce the hardware of $16{\times}16$ and $8{\times}8$ prediction, the sharing logic between 2 prediction is utilized. The proposed architecture can process the 30frame/sec of full HD image in 108 MHz clock and operate 425 cycle for one macroblock.

• Atmosphere
• /
• v.33 no.4
• /
• pp.355-365
• /
• 2023

To proactively manage climate risk, near-term climate predictions on annual to decadal time scales are of great interest to various communities. This study evaluates the near-term climate prediction skills in East Asia with DePreSys4 retrospective decadal predictions. The model is initialized every November from 1960 to 2020, consisting of 61 initializations with ten ensemble members. The prediction skill is quantitatively evaluated using the deterministic and probabilistic metrics, particularly for annual mean near-surface temperature, land precipitation, and sea level pressure. The near-term climate predictions for May~September and November~March averages over the five years are also assessed. DePreSys4 successfully predicts the annual mean and the five-year mean near-surface temperatures in East Asia, as the long-term trend sourced from external radiative forcing is well reproduced. However, land precipitation predictions are statistically significant only in very limited sporadic regions. The sea level pressure predictions also show statistically significant skills only over the ocean due to the failure of predicting a long-term trend over the land.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.129-133
• /
• 2023

Classification or prediction problem is how to solve it using a specific feature to obtain the predicted class. A wheat seeds specifications 4 3 classes of seeds will be used in a prediction process. A multi linear regression will be built, and a prediction error ratio will be calculated. To enhance the prediction ratio an ANN model will be built and trained. The obtained results will be examined to show how to make a prediction tool capable to compute a predicted class number very close to the target class number.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.422-433
• /
• 2015

In this paper, we demonstrate inter-layer prediction tools for scalable video coders. The proposed scalable coder is designed to support not only spatial, quality and temporal scalabilities, but also view scalability. In addition, we propose quad-tree inter-layer prediction tools to improve coding efficiency at enhancement layers. The proposed inter-layer prediction tools generate texture prediction signal with exploiting texture, syntaxes, and residual information from a reference layer. Furthermore, the tools can be used with inter and intra prediction blocks within a large coding unit. The proposed framework guarantees the rate distortion performance for a base layer because it does not have any compulsion such as constraint intra prediction. According to experiments, the framework supports the spatial scalable functionality with about 18.6%, 18.5% and 25.2% overhead bits against to the single layer coding. The proposed inter-layer prediction tool in multi-loop decoding design framework enables to achieve coding gains of 14.0%, 5.1%, and 12.1% in BD-Bitrate at the enhancement layer, compared to a single layer HEVC for all-intra, low-delay, and random access cases, respectively. For the single-loop decoding design, the proposed quad-tree inter-layer prediction can achieve 14.0%, 3.7%, and 9.8% bit saving.