• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.344-352
• /
• 2002

In the analysis of the 3 dimensional plate structures by the finite element method, the triangular elements are generally used for the global stiffness matrix of the analyzed system. But the triangular elements of the plates have some problems in the process of formulation and in the precision of analysis. The formulation of the finite element method to analyze 3 dimensional plate structures using quadrilateral elements is presented in this paper. The degree of freedom off nodal point is 6, that is, the displacements in the direction off-y-z is and the rotations about x-y-z axis and then the degree of freedom off element is 24. For the comparison of the analysis using triangular elements and quadrilateral elements, the rectangular plates subjected to the uniform load and a concentrated load on the centroid of the plate, for which the theoretical solutions have been obtained, are analyzed. The calculated deflections of the rectangular plates using the finite element method by the triangular elements and the quadrilateral elements are also compared with the deflections of the plates calculated by theoretical solutions. The defections of the rectangular plates calculated by the finite element method using the quadrilateral elements are closer to the theoretical solutions than the defections calculated by the finite element method using the triangular elements. The deflection of the centroid of plate, calculated by the finite element method, converges to that of theoretical solution as the number of elements is increased. This convergence is much more rapid for the case of using the quakrilateral elements than fir the case of using triangular elements.

• 산업공학
• /
• 제25권3호
• /
• pp.347-356
• /
• 2012

The acquisition cost of defense weapon system has been continuously increasing because of art-of-technology of it. This phenomenon requires efficiency and transparency in the weapon system acquisition process through cost estimation. Therefore cost estimation is very important to the government acquisition programs to support decisions about funding and to evaluate resource requirement as a key decision point. The Commercial parametric cost estimating models have been using extensively to obtain appropriate cost estimates in early acquisition phase. These models have many restrictions to ensure the cost estimating result in Korean defense environment because they are developed based on foreign R&D data. Also estimation results are different from Korean defense industry accounting system. So, some studies have been tried to develop a CER (Cost Estimation Relationship) based on the Korean historical data. However, there are some restrictions to improve the predictability and ensure the stability of the developed singular CERs which consider the following data characteristics individually. The the abnormal conditions of data that is multicollinearity, outlier and heteroscedasticity under rack of the number of observations. In this paper, a CER's Linear Combining Model is proposed to overcome those limitations which guarantee more accurate estimation (25.42% higher precision) than other singular CERs. At least, this study is meaningful as a first attempt to improve the predictability of CER with insufficient data. The methodology suggested in this study will be useful to develop a complex Korean version cost estimating model development in future.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.549-567
• /
• 2015

A first-order moment method (FORM) reliability analysis is commonly used for structural stability analysis. It requires the values and partial derivatives of the performance to function with respect to the random variables for the design. These calculations can be cumbersome when the performance functions are implicit. A Gaussian process (GP)-based response surface is adopted in this study to approximate the limit state function. By using a trained GP model, a large number of values and partial derivatives of the performance functions can be obtained for conventional reliability analysis with a FORM, thereby reducing the number of stability analysis calculations. This dynamic renewed knowledge source can provide great assistance in improving the predictive capacity of GP during the iterative process, particularly from the view of machine learning. An iterative algorithm is therefore proposed to improve the precision of GP approximation around the design point by constantly adding new design points to the initial training set. Examples are provided to illustrate the GP-based response surface for both structural and non-structural reliability analyses. The results show that the proposed approach is applicable to structural reliability analyses that involve implicit performance functions and structural response evaluations that entail time-consuming finite element analyses.

• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.34-43
• /
• 1996

The present pesticide application technology widely used with a power sprayer in Korea is assessed as the problem awaiting solution in the point of view of its ineffectiveness, inefficiency, and environmental contamination. As one approach to get rid of these problems, the boom spraying with ultra-low volume and precision application technology has been recommended. The study was undertaken to investigate plants damages incurred by the self-propelled boom-sprayer vehicle, to develop the design criteria of vehicle wheel, and to compare plant damages caused by the front wheel steering vehicle, the 4-wheel drive vehicle and the articulated vehicle, by the computer simulation. The experiment showed that the amount of damaged plants incurred by the self-propelled boom sprayer were about 0.29% in average in the field size of 100m$\times$50m(0.5ha), about 60~80% of which recovering while growing. The recommandable wheel size was analyzed to be 70~100cm in diameter, 8~15cm in width from the vehicle-plant-soil relationship. The simulation on damaged plants anticipated to be incurred by various steering vehicles showed that the smaller the turning radius, the lesser the damaged plants within its range of 3~5m. Average plant damage rate by the front wheel steering vehicle, the 4-wheel drive vehicle and articulated vehicle was relatively assessed to be 2 : 1.8 : 1.

• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1575-1585
• /
• 2010

성공적인 프로젝트 수행을 위해서 개발초기 단계에서 소프트웨어 개발노력 등 자원을 예측하는 것은 매우 중요하다. 그리고 이는 소프트웨어 규모를 통해 가능하며, 소프트웨어 규모 산정 방식의 최근 동향은 프로그램 라인 수(LOC)와 같은 개발자 관점의 접근방식 보다는 사용자가치 중심의 산정방식인 기능점수 분석기법(FPA)을 보다 선호하고 있다. 따라서 본 논문에서는 사례연구를 통해 실제 투입되는 개발노력을 측정하고, 완전기능점수 기법 매뉴얼에 따라 COSMIC Function Point를 직접 계산하였다. 그리고 산출된 데이터에 대한 회귀분석을 통해 COSMIC-FFP기반 소프트웨어 개발노력 추정 모델을 제안한다. 그리고, COSMIC-FFP 기법은 규모를 추정하는데 필요한 기능 요소들에 대한 가중치를 적용하지 않는 단점이 있다. 따라서, 본 연구에서는 제안된 모델의 정확성을 높이기 위해 시스템 복잡도를 가중치로 적용하며, 가중치 추정을 위한 모델도 제안한다.

• Clinical and Experimental Pediatrics
• /
• 제58권8호
• /
• pp.301-308
• /
• 2015

Purpose: We evaluated three blood glucose self-monitoring for measuring whole blood glucose levels in preterm and low-birth-weight infants. Methods: Between December 1, 2012 and March 31, 2013, 230 blood samples were collected from 50 newborns, who weighed, ${\leq}2,300g$ or were ${\leq}36$ weeks old, in the the neonatal intensive care unit of Eulji University Hospital. Three blood glucose self-monitoring (A: Precision Pcx, Abbott; B: One-Touch Verio, Johnson & Johnson; C: LifeScan SureStep Flexx, Johnson & Johnson) were used for the blood glucose measurements. The results were compared to those obtained using laboratory equipment (D: Advia chemical analyzer, Siemens Healthcare Diagnostics Inc.). Results: The correlation coefficients between laboratory equipment and the three blood glucose self-monitoring (A, B, and C) were found to be 0.888, 0.884, and 0.900, respectively. For glucose levels ${\leq}60mg/dL$, the correlation coefficients were 0.674, 0.687, and 0.679, respectively. For glucose levels>60 mg/dL, the correlation coefficients were 0.822, 0.819, and 0.839, respectively. All correlation coefficients were statistically significant. And the values from the blood glucose self-monitoring were not significantly different from the value of the laboratory equipment, after correcting for each device's average value (P>0.05). When using laboratory equipment (blood glucose ${\leq}60mg/dL$), each device had a sensitivity of 0.458, 0.604, and 0.688 and a specificity of 0.995, 0.989, and 0.989, respectively. Conclusion: Significant difference is not found between three blood glucose self-monitoring and laboratory equipment. But correlation between the measured values from blood glucose self-monitoring and laboratory equipment is lower in preterm or low-birth-weight infants than adults.

• 한국재료학회지
• /
• 제5권1호
• /
• pp.12-21
• /
• 1995

본 연구에서는 부식환경하에서 bulging 시험동안 음향방출거동에 미치는 변형률속도에 대한 영향을 알아보았다. 시험에 사용된 변형률속도의 범위는 $4 \times 10^{-6}S^{-1}$에서 $1 \times 10^{-4} \times S^{-1}$까지이며, AE신호 특성을 평가하기 위해 사용된 인자는 AE hit수와 진폭으로 하였다. 시험결과, 변형률속도가 감소함에 따라 등가파괴변형률과 원주방향의 균열 길이는 감소하였으나, 파괴과정동안 총 누적 AE hit수와 평균진폭은 크게 증가하였다. 그리고 AE신호 특성치의 최대점은 시험전분부에 접근하였으며, 단위 등가파괴변형률당 평균진폭이 20dB 이상에서는 뚜렷하게 응력부식륜열 현상을 관찰할 수 있었다. 또한 음향방출시험법은 변형률속도에 따른 재료의 응력부식균열 감수성 정도를 평가하는데 있어 그 적용 가능성이 있음을 알 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권2호
• /
• pp.75-85
• /
• 2016

The performance of up-to-date mapping functions and various mean temperature equations were analyzed to derive optimal mapping function and mean temperature equation when GNSS precipitable water vapor (PWV) was investigated in the Korean Peninsula. Bernese GNSS Software 5.2, which can perform high precision GNSS data processing, was used for accurate analysis, and zenith total delay (ZTD) required to calculate PWV was estimated via the Precise Point Positioning (PPP) method. GNSS, radiosonde, and meteorological data from 2009 to 2014 were acquired from Sokcho Observatory and used. ZTDs estimated by applying the global mapping function (GMF) and Vienna mapping function 1 (VMF1) were compared with each other in order to evaluate the performance of the mapping functions. To assess the performance of mean temperature equations, GNSS PWV was calculated by using six mean temperature equations and a difference with radiosonde PWV was investigated. Conclusively, accuracy of data processing was improved more when using VMF1 than using GMF. A mean temperature equation proposed by Wu (2003) had the smallest difference with that in the radiosonde in the analysis including all seasons. In summer, a mean temperature equation proposed by Song & Grejner-Brzezinska (2009) had the closest results with that of radiosonde. In winter, a mean temperature equation proposed by Song (2009) showed the closest results with that of radiosonde.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2170-2174
• /
• 2005

Selective Laser Sintering (SLS) is a useful rapid prototyping technique for the manufacture of three dimensional (3D) solid objects directly from a scanning data. A new approach called a Selective Multi-Laser Sintering (SMLS) system has been developed at Korea Institute Machinery & Materials (KIMM) as an industrial type SFFS. This SMLS machine is built with a frame, heaters, nitrogen supply part, laser system. This system uses the dual laser and 3D scanner made in $Solutionix^{TM}$ to improve the precision and speed for large objects. The three-dimensional solid objects are made of polyamide powder. The investigation on each part of SMLS system is performed to determine the proper theirs design and the effect of experimental parameters on making the 3D objects. The temperature of the system has a great influence on sintering the polymer. Because the stability of the powder temperature prevents the deformation of each layer, the controls of the temperature in both the system and the powders are very important during the process. Therefore, we simulated the temperature distribution of build room using the temperature analysis with ANSYS program. Selected radiant heater is used to raise temperature of powder to melting point temperature. The laser parameters such as scan spacing, scan speed, laser power and laser delay time affect the production the 3D objects too. The combination of the slow scan speed and the high laser power shows the good results without the layer curling. The work is under way to evaluate the effect of experimental parameters on process and to produce the various objects. We are going to experiment continuously to improve the size accuracy and surface roughness.

• 천문학회보
• /
• 제41권2호
• /
• pp.48.3-49
• /
• 2016

We have five different types of observation modes with regard to the Deep Ecliptic Patrol of the Southern Sky (DEEP-South); Opposition Census (OC) for targeted photometry, Sweet Spot Survey (S1) for discovery and orbit characterization of Atens and Atiras, Ecliptic Survey (S2) for asteroid family studies and comet census, NEOWISE follow-up (NW) for near simultaneous albedo measurements in the visible bands, and Target of Opportunity (TO) observation for follow-up either for unpredictable events or targets of special interests. Different exposures with such different modes result in a wide range of background noise level, the number of background stars and the mover's projected speed in each image. The Moving Object Detection Program (MODP) utilizes multiple mosaic images being taken for the same target fields at different epochs at the three KMTNet sites. MODP employs existing software packages such as SExtractor (Source-Extractor) and SCAMP (Software for Calibrating Astrometry and Photometry); SExtractor generates object catalogs, while SCAMP conducts precision astrometric calibration, then MODP determines if a point source is moving. This package creates animated stamp images for visual inspection with MPC reports, the latter for checking whether an object is known or unknown. We evaluate the astrometric accuracy and efficiency of MODP using the year one dataset obtained from DEEP-South operations.