• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.205-210
• /
• 2017

Multi-Global Navigation Satellite System (GNSS) can significantly improve the positioning accuracy and convergence speed. The reliability and availability of multi-GNSS precise point positioning (PPP) is steadily increasing with the rapid development of GNSS satellites. In this study, multi-GNSS PPP analysis is performed to compare the positioning precision by processing the observations from different GNSS systems (GPS, GLONASS, Galileo and BeiDou). To improve the positioning performance of the multi-GNSS PPP, we employed the weighed measurement noise (WMN) method. After applying WMN method to multi-GNSS PPP, positioning precision is improved by approximately 26.3% compared to the GPS only solutions, and by approximately 9.1% compared to combined GPS, GLONASS, and Galileo PPP.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.9
• /
• pp.16-19
• /
• 2010

This paper presents how to design and fabricate the gravure offset printing system for enhancement of register precision. Factors of precision error are caused by imprecision of gravure plate, deformation of substrate, printing quality change due to the change of ink viscosity, Imprecision of printing machine, and so on. This study suggests concept design of gravure offset printing system which is able to minimize or remove these error factors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.83-84
• /
• 2006

Due to the capability of net shaping for complex 3D geometry, powder injection molding (PIM) is widely used for automotive parts, electronics and medical industry. In this study, an ultrasonic dental scaler tip produced by machining process was redesigned for the PIM process. An injection mold was designed and manufactured to produce the dental scaler tip by the PIM process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.777-780
• /
• 2005

The global consumption of aspheric surfaces will expand rapidly on the Electronics and Optical Components Information and Communications, Aerospace and Defense, and Medical optics markets etc. We must research on market, technology forecast and analysis of aspheric surfaces that is a principle step of ultra precision machine technology with a base one of optical elements. Especially, F-theta lens is one of the important parts in LSU(Laser scanning unit) because it affects on the optical performance of LSU dominantly. The core is most of important to produce plastic F-theta lens by plastic injection molding method, which is necessary to get the ultra-precision aspheric and non-axisymmetric machine processing technology.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.969-974
• /
• 2014

Previously fabricated electronic devices were used for vacuum manufacturing processes such as conventional semiconductor manufacturing. However, they are difficult to apply to continuous processes such as roll-to-roll printing, which results in very high device manufacturing and processing costs. Therefore, many developers have been interested in applying continuous processes to contact printing or noncontact printing technologies and they proposed various continuous printing techniques instead of conventional batch coating. In this paper, we proposed improved gravure offset printing process as one of the contact printing technique. We used etching pattern geometry with soft core blanket roll for printing of ultra fine line below the 10um.Using this technique we obtained flexible metal grid mesh film as transparent conductive film.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.1015-1021
• /
• 2014

This paper proposes the center distributed embroidery machine structure with 1,500 RPM, 52 heads for productivity and large sized embroidery goods. The synchronous velocity controller is adopted for control of the 2-axis distributed embroidery machine and the DOB(Disturbance Observer) is also adopted for minimizing disturbances caused by needle cams. For driving experiments of 2-axis center distributed driving structure, two conventional 26 heads 1,500RPM embroidery machines are used. It was shown that the center distributed driving structure with 2-axis synchronous control can be one way for implementing a large embroidery machine.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.97-100
• /
• 1997

A new control method for the robust position control of a brushless DC(BLDC) motor using the asymptotically stable adaptive load torque observer is presented. A precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method. And the application of the load torque observer is published in [1] using fixed gain. However, the flux linkage is not exactly known for a load torque observer. Therefore, a model reference adaptive observer is considered to overcome the problem of the unknown parameter in this paper. And stability analysis is carried out using Liapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current having the fast response.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.537-542
• /
• 2016

The demand for LBS (Location Based Services) is increasing in the development of communication and mobile technologies. Positioning technology is a core technology for LBS, because LBS is based on a position of each device or user. But positioning technology especially for indoor environments is getting a lot of attention. Indoor positioning errors usually occur seriously in indoor environments where APs (Access Points) are set in a very concentrated and complex arrangement. In order to reduce indoor positioning errors, we adopt DOP (Dilution of Precision) which reflects an APs configuration information. In this paper, we propose an enhanced indoor positioning method using IEEE 802.11 RSSI measurements and AP configuration information.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.46-54
• /
• 2001

Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.