• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.42-50
• /
• 2001

In this paper, a new technique and theory are proposed which correct the orientation (inclination of a vertical axis) of a cylinder in vertical-micro positioning device. An algorithm for determining the orientation of the cylinder with a pair of displacement sensor units is derived and two types of the correction methods are described. To assess the performance and efficiency of the developed correction technique, the compensation errors originated from the correction algorithm and the machined characteristics of cylinder surface are evaluated from the geometrical considerations and the statistical techniques. Based upon the evaluation results, the maximum compensation error is estimated for the orientation of cylinder and the optimum correction technique is derived.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1434-1437
• /
• 2011

Precision measurement of silicon wafer resistivity has been using single-configuration Four-Point Probe(FPP) method. This FPP method have to applying sample size, shape and thickness correction factor for a probe pin spacing to precision measurement of silicon wafer. The deference for resistivity measurement values applied correction factor and not applied correction factor was about 1.0 % deviation. The sample size, shape and thickness correction factor for a probe pin spacing have an effects on precision measurement for resistivity of silicon wafer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.495-496
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.433-434
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1150-1153
• /
• 1995

This paper describes that study which construct a theoretic and experimental algorithm in order to make the automatic correction system od detent spring, and when load for correction pressed at spring, it can be found elastic and plastic deformation quantities by Finite Element Analysis. As a result, it has been found that the simulation datas are in good agreement with experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.504-509
• /
• 1995

In this paper, we developed a position correction system of industrial robot for door-chassis assembly task. With the aid of a dedicated vision system, industrial robot accomplished visually acceptable door-chassis's assembly task. The alogorithm of the position detection of notch and 2 dimesional position correction algorithm are noteworthy. The obtained algorithms were satisfatorily implemented for a real door-chassis model.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.94-99
• /
• 2005

To correct the difference of filling volumn for various cut tobacco and puffed stem according to moisture contents, correction equation was estamated by a simple regression analysis. The $R^2$(coefficient of determination) of correction equation was above 0.95. To verify the precision of correction equation, we predicted correction equation of other samples. The filling volumns by the difference of $1\%$ moisture content were $0.018\;~\;0.022cc/g$ (cut tobacco) and 0.060cc/g (puffed stem). The precision of correction equation for various cut tobacco was very high, but that of puffed stem was low due to quality deviation of row stem according to a season.

• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.22-29
• /
• 2006

This paper considers the lens distortions such as a fisheye distortion and a perspective distortion. While a fisheye lens has a wide field-of-view, it causes a large distortion to the images. Regardless of a fisheye lens or a rectilinear lens, a lens generates perspective distortion in a vertical direction when the lens views in an upward direction or downward direction. These distortions deform images differently from human visual functions. Therefore, this paper presents a method to correct the distortions, and whereby, the research in this paper enlarges choices of images to image processing algorithm that may select the distorted images and the corrected images depending on applications. An infinite polynomial model is employed in the fisheye radial distortion correction, and the vertical perspective distortion correction is done by using a vanishing point. The methods introduced in this paper are implemented on the images captured by a rear-view camera installed on a vehicle and showed their robustness of the correction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.3-4
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.453-454
• /
• 2010