• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1483-1486
• /
• 2004

Purpose of this paper is to accummulate database of automotive steel sheet from mild steel to high strength steel in cold rolled steel sheets. Physical properties, mainly mechanical properties, of steel sheet are tested and all data are arranged to one sheet. Methods of test are composed of FLD, tensile strength test, chemical composition, surface roughness and product conditions. Finally this database will be helpful to automotive body designers and die designers to design automotive body parts and tools in a material point of view.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.794-798
• /
• 1995

We performed analysis for crank shaft and connecting rod in driving device of Cold Heading Machine. The results of this study is following ; 1. The nominal pressure is happened at 8mm under bottom dead center. And then the theoretical angel of crank (.theta.) and connecting rod (.phi.) are .theta. = 25 .deg. 1' and .phi.= 6 .deg. 1' but the analysis angel are .theta. = 25 .deg. and .phi.= 7 .deg. 2. The load is loaded at theta. = 51 .deg. in crank angle. 3. The maximum stress of connecting rod is about290MPa. It is exited inner stress range in consideration of safety factor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.377-378
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.285-286
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.833-834
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.789-790
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.851-852
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.219-220
• /
• 2011

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.108-115
• /
• 1999

In this paper, the analysis of cold forging in final state has been performed by using rigid-plastic FEM. For the analysis, the geometry and flow stress of the workpiece are required. One method to obtain the geometry is measurement of that made from experimet. To evaluate the flow stress, average effective strain is calculated from the load-stroke diagram by using energy method. The numerical test performed to show the validity of propose method. The analysis of PFIR, the precision forging of spurgear with inside relif, is performed.