• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.168-177
• /
• 2013

This experiment was carried out to estimate leaching potential of thirteen endocrine disruptor-suspected pesticides in upland soils using soil columns (5 cm I.D. ${\times}$ 35 cm H.) packed with soil A (sandy loam) and soil B (loam). When 12.6 mL of water, average precipitation in Cheongju area during the period from June to August, 2001-2010, was percolated through soil column packed with soil A every day for 21 days, no pesticides were detected from leachate, with the exception of metribuzin which was detected with negligible. Also, when 2 L of water was percolated consecutively five times through soil columns packed with soil A and B, irrespective of soil types, cypermethrin, endosulfan, fenvalerate, parathion and trifluralin, which were very low water solubilities and high soil $K_{oc}s$, were not detected from leachate and were distributed mostly in the depth of 0-5 cm, representing that water solubility and soil $K_{oc}$ are major contributing factors to their leaching behavior. Despite high average leaching rates in carbaryl and methomyl, actual possibilities of ground water contamination in the agricultural environment by them would be very low, considering that the negligible amount of pesticide was percolated through a lysimeter with an undisturbed soil core simulating the field conditions, while most of pesticide was percolated through a soil column with the disturbed soil profile.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.150-155
• /
• 2020

Alumina (Al₂O₃) is mainly used as a structural ceramic material and to have good mechanical properties requires a dense microstructure. In commercial fabrication, the liquid phase sintering process is adjusted to reduce the sintering temperature of alumina. In this study, the effect of added amounts of cobalt oxide as a coloring agent on the microstructure and mechanical properties was investigated in the CaO-SiO₂-MgO-system liquid phase sintering of 92 % alumina at various sintering temperatures. When 11 wt% Co₂O₃ was added, a rearrangement of alumina particles, which is the main densification step in liquid phase sintering, occurred from a sintering temperature of 1200℃. Solution re-precipitation and coalescence steps followed from 1300℃ with the grain growth of alumina particles. The addition of excess Co₂O₃ and sintering temperatures above 1400℃ resulted in a decrease in sintered density and Vickers hardness, because of the low viscosity of the liquid phase. In 92 % alumina with the addition of 11 wt% Co₂O₃, a sintered density and Vickers hardness of 3.86 g/㎤ and 12.32 GPa, respectively, were obtained at a sintering temperature of 1350℃.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.284-288
• /
• 1992

This study was undertaken to investigate the effect of pH and phytate level on the solubility of the protein due to binding between phytate and low-phytate rapeseed protein isolate by means of SDS-polyacrylamide gel electrophoresis. Results showed that the number of protein bands decreased by the increasing amount of phytate added to the soluble extract at pH 2.0 and 5.0 whereas there was no change at pH 11.5. Among 18 bands of rapeseed proteins at pH 2.0, seven bands (105.8, 52.3, 37.3, 34.8, 26.3, 21.3, 18.4 KDa) were removed by precipitation with 100 mg phytate addition and six bands (78.8, 46.5, 19.4, 16.8, 11.7, 8.5 KDa) further disappeared by 150 mg phytate addition. Among 15 bands at pH 5.0, only four bands disappeared by phytate addition. It is suggested that the functionality of rapeseed protein isolate can be improved by lowering the phytate content.

• Korean Journal of Environmental Agriculture
• /
• v.8 no.1
• /
• pp.17-29
• /
• 1989

This study was conducted to evaluate the behavior in the water and the impact on aquatic organisms following aerial application of two insecticides in the forest, cyfluthrin and trichlorfon, to control the alder leaf beetle. As active ingredients, 25g of cyfluthrin and 536g of trichlorfon per ha were diluted seperately into 30L of tap water, and applied with a helicopter to the study areas. A model stream study was also conducted in a stream located adjacent to the study area in order to confirm the impact of insecticides on aquatic invertebrates. Cyfluthrin residues in water were $0.62{\mu}g/L$ (1st. application) and $78{\mu}g/L$ (2nd application) immediately after spraying. and decreased, to a non-detectable level after one day, while trichlorfon residue increased to $30.7{\mu}g/L$ one day after spraying and fluctuated for 22th day depending on precipitation after spraying. Cyfluthrin application rapidly increased the number of some drifting aquatic invertebrates during 24-hour period immediately after spraying, but had no effects on the other aquatic organisms such as fish and zooplankton. The largest increase in the number of drifting organisms following application of cyfluthrin was shown by Ephemeroptera, and followed by Trichoptera, Coleoptera, and Diptera. However, trichlorfon little affected the number of drifting aquatic invertebrates and zooplankton population.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.23-36
• /
• 2006

Experimental leaching of tailings was performed as a function of times (1, 2, 4, 7, 14, 21 and 30 days) in the laboratory using reaction solutions equilibrated to three different pH set-points (pHs 1,3 and 5). The initial pHs of 5 and 3 stabilized at either 4.6-6.1 or 2.8-3.5 in 2 days and decrease gradually with time afterwards. The results of the leaching tests indicate that the significant increase in the sulfate concentrations and in acidity after 7 days of leaching results from the oxidation of sulfide minerals. There were no significant variations in the extractable Pb found in the leach solutions of pH 5 and 3 within the reaction time (1-30 days), while Zn, Cd and Cu concentrations tend to significantly increase with time. In tailings leaching at an initial pH=1, two trends were observed: i) The 'Zn-type' (Zn, Cd and Cu), with increasing concentrations between days 1 and 30, corresponding to the expected trend when continuous dissolution is the dominant process, ii) the 'Pb-type' (Pb), with decreasing concentrations over time, suggesting rapid dissolution of a Pb source followed by the precipitation of 'anglesite' in relation to the large increase in dissolved sulfates. The high sulfate concentrations were coupled with high concentrations of released Fe, Zn and Cd. Release of Zn and Cd and acidity from these leaching experiments can potentially pose adverse impact to surface and groundwater qualities in the surrounding environment. The kinetic problems could be the important factor which leads to increasing concentrations of trace metals in the runoff water.

• Mineral and Industry
• /
• v.26
• /
• pp.1-12
• /
• 2013

In this study, an accelerated carbonation process was applied to stabilize hazardous heavy metals of industrial solid waste incineration (ISWI) bottom ash and fly ash, and to reduce $CO_2$ emissions. The most commonly used method to stabilize heavy metals is accelerated carbonation using a high water-to-solid ratio including oxidation and carbonation reactions as well as neutralization of the pH, dissolution, and precipitation and sorption. This process has been recognized as having a significant effect on the leaching of heavy metals in alkaline materials such as ISWI ash. The accelerated carbonation process with $CO_2$ absorption was investigated to confirm the leaching behavior of heavy metals contained in ISWI ash including fly and bottom ash. Only the temperature of the chamber at atmospheric pressure was varied and the $CO_2$ concentration was kept constant at 99% while the water-to-solid ratio (L/S) was set at 0.3 and $3.0dm^3/kg$. In the result, the concentration of leached heavy metals and pH value decreased with increasing carbonation reaction time whereas the bottom ash showed no effect. The mechanism of heavy metal-stabilization is supported by two findings during the carbonation reaction. First, the carbonation reaction is sufficient to decrease the pH and to form an insoluble heavy metal-material that contributes to a reduction of the leaching. Second, the adsorbent compound in the bottom ash controls the leaching of heavy metals; the calcite formed by the carbonation reaction has high affinity of heavy metals. In addition, approximately 5 kg/ton and 27 kg/ton $CO_2$ were sequestrated in ISWI bottom ash and fly ash after the carbonation reaction, respectively.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.586-591
• /
• 2010

Solar cells have been more intensely studied as part of the effort to find alternatives to fossil fuels as power sources. The progression of the first two generations of solar cells has seen a sacrifice of higher efficiency for more economic use of materials. The use of a single junction makes both these types of cells lose power in two major ways: by the non-absorption of incident light of energy below the band gap; and by the dissipation by heat loss of light energy in excess of the band gap. Therefore, multi junction solar cells have been proposed as a solution to this problem. However, the $1^{st}$ and $2^{nd}$ generation solar cells have efficiency limits because a photon makes just one electron-hole pair. Fabrication of all-silicon tandem cells using an Si quantum dot superlattice structure (QD SLS) is one possible suggestion. In this study, an $SiO_x$ matrix system was investigated and analyzed for potential use as an all-silicon multi-junction solar cell. Si quantum dots with a super lattice structure (Si QD SLS) were prepared by alternating deposition of Si rich oxide (SRO; $SiO_x$ (x = 0.8, 1.12)) and $SiO_2$ layers using RF magnetron co-sputtering and subsequent annealing at temperatures between 800 and $1,100^{\circ}C$ under nitrogen ambient. Annealing temperatures and times affected the formation of Si QDs in the SRO film. Fourier transform infrared spectroscopy (FTIR) spectra and x-ray photoelectron spectroscopy (XPS) revealed that nanocrystalline Si QDs started to precipitate after annealing at $1,100^{\circ}C$ for one hour. Transmission electron microscopy (TEM) images clearly showed SRO/$SiO_2$ SLS and Si QDs formation in each 4, 6, and 8 nm SRO layer after annealing at $1,100^{\circ}C$ for two hours. The systematic investigation of precipitation behavior of Si QDs in $SiO_2$ matrices is presented.

• The Korean Journal of Zoology
• /
• v.31 no.4
• /
• pp.327-333
• /
• 1988

계절에 따른 초파리 집단내 역위다형 현상의 변동상을 알기 위하여 전주근교의 과수원에서 1983년 1월부터 11월까지 격월로 여섯번 채집한 집단 표본을 분석하였다. 총 1071마리에서 얻은 15개형의 역위는 모두 편동원체역위(paracentric inversion)였으며, 이 중 7개형은 세계형91위(cosmopolitan inversion)였고, 나머지 8개형은 지역형역위(endemic inversion)였다. 개체당 역위의 평균 보유수는 0.639이고 역위를 보유한 개체의 빈도는 0.465였다. 7개의 세계형역위에 대한 표본집단을 분석한 결과 격월 집단간에서 유의한 차이를 보이는 반면 1월과 1 1월 표본간에서는 그 성황이 오히려 비숫해짐으로서 집단내 총역위빈도는 주기적으로 변동하고 있음이 암시된다. 역위와 환경변수와의 다중상관분석에서는 기온, 습도, 강수량이 역위빈도에 유의한 영향을 미치는 것으로 나타났고 역위 중 In(2L)t가 상기한 환경변수 모두에 대하여 유의한 상관관계를 보인 반면, In(3R)C와 In(3R)P는 어느 것과도 상관성을 보이지 않았다. 염색체내 그리고 염색체간의 연관 또는 조합의 검정결과 연관불평형혈상을 1월, 5월, 그리고 7월 표본의 제3염색체에서, 그리고 비균일조합은 1월과 7월 표본에서 역시 제3염색체에서만 산출 되었다. Seasonal changes of inversion frequencies in Chonju 0. melanogaster populations were studied. A total of 1071 males were collected six times with ho months intewal from January through November in 1983. to analyse diploid sets of chromosomes carried by males, each male was mated to several virgin females homoBvgous for cytologically standard sequence in all chromo-somes. From each mating, more than seven FL larvae were selected in random and tested to find chromosomal aberrations. In the present study, 15 different inversions were found and identified to be paracentric only In both second and third chromosomes; seven were cosmopolitan and the rest eight endemic types. The average frequency of inversions was 0.465 and the mean number of inversions carried by a single male was 0.639. The linkage disequilibria were detected between the leK and right arms of third chromosomes from the samples of January, May and Julv, Whereas nonrandom associations appeared also in the third chromosomes only in January and Julv samples. In multiple regression analysis among frequencies of inversions and environ-mental variables it appeared that mean temperature, relative humidity and total precipitation for a month skipped over 30 days before collected affect to change to frequencies of particular inver-sions. With respect to the behavior of inversions in the present samples, it is suggested, with the Friedman's analysis of variance by ranks of inversion frequency orders, that the frequencies of inversions change cyclically year to year.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.239-246
• /
• 2006

KAERI Underground Research Tunnel (KURT) was recently constructed through the site investigation from the yea. of 2003 at KAERI site, Dukjin-dong, Yuseong-gu, Daejeon city. The geo-logic setting of the site has been slightly metamorphosed. There are small fractures developed in the rock and several kinds of secondary filling minerals exist in the fractures. We examined mineralogical characteristics of fracture-filling calcite, which is not only largely distributed, but also can significantly affect the radionuclides migration. The calcite is found along fractures like other secondary minerals, forming thick veins in part. Most calcite-filled fractures contain quartz, iron oxides, and dolomite as minor minerals. The calcite crystals show an characteristic appearance with an uniformly oriented growth, coated with goethite on the edge and the etch-pit sites of their surface. Some calcite crystals have been newly formed by the precipitation of elements dissolved from the tunnel shotcrete wall, and their morphology changed according to the chemistry and flow of groundwater. The calcite can modify the groundwater chemistry and significantly affect the sorption behavior of radionuclides. The characteristic crystal structure and surface morphology of the calcite examined in the KURT site will be used as important basic data for the radionuclide migration experiment in the future.