• 한국추진공학회지
• /
• 제11권4호
• /
• pp.1-9
• /
• 2007

많은 산업체들은 현재 연소기의 열효율을 증가시키기 위해 노력하고 있으며, 증가되는 NOx 발생으로 환경적인 규제에 직면하고 있다. 우리는 이렇게 열효율 증가와 NOx 발생 감소를 동시에 해결할 수 있도록 새로운 방법을 연구하였다. 이 새로운 개념은 확실히 NOx와 같은 오염물질을 절감시키며, 동시에 반경방향 열전달을 증가시키는 것으로 알려져 있고 이를 세차제트 연소기라고 부른다. 이러한 세차제트 노즐의 특징은 가스터빈의 연소효율의 증가로 이어질 수 있을 것이다. 기본적인 세차제트 노즐에 대한 특설파악을 위해 FLUENT를 이용한 수치해석, 레이저를 이용한 가시화 시험을 진행하였고, 노즐단면에서의 속도분포를 다른 논문의 실험결과와 비교하였다. Centerbody가 있는 경우 세차현상이 잘 일어났고 노즐 출구에서의 확산각이 증가함을 확인하였다.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.8-14
• /
• 2002

Measurements of global emissions, flame radiation and flame dimensions are presented for unconfined turbulent-jet and precessing-jet diffusion flames. Precessing jet flames are characterised by increases in global flame radiation and global flame residence time for methane and propane fuels, however a strong dependency of the NOx emission indices on the fuel type exists. The fuel type dependence is considered to be because soot radiation is more effective than gas-radiation at reducing global flame temperatures relative to adiabatic flame temperatures and reducing the NO production rate.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.47-56
• /
• 2011

Our previous experimental and numerical investigations of decelerated swirling flows in conical diffusers have demonstrated that water jet injection along the symmetry axis mitigates the pressure fluctuations associated with the precessing vortex rope. However, for swirling flows similar to Francis turbines operated at partial discharge, the jet becomes effective when the jet discharge is larger than 10% from the turbine discharge, leading to large volumetric losses when the jet is supplied from upstream the runner. As a result, we introduce the flow-feedback approach for supplying the jet by using a fraction of the discharge collected downstream the conical diffuser. Experimental investigations on mitigating the pressure fluctuations generated by the precessing vortex rope and investigations of pressure recovery coefficient on the cone wall with and without flow-feedback method are presented.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.92-101
• /
• 1994

Water jet has been employed in extraacton of minerals for many years but the applications of low pressure jent s ar emodfined to some fields. With increasing strength of equipment it is possible to consider the use of high speed water jets for cutting hard rock. The high speed water jet technology is applied to various engineering fiels such as precessing rocks, quarrying rocks, mechanical fracturing as wel as rock excavation under the sea. For slot cutting in rocks with high speed water jets it is necessary to establish the empirical formula for estiamation of the cutting depth. The cutting depth is influenced by cutting parameters such as driving pressure, traverse speed, standoff distance, and shape and diameter of nozzel. Tests were carried out with a variety of cutting parameters on three types of granite. Nozzle pressures ranged from 1,200 to 2,800 bar, traverse speeds from 0.45 to 10.38 cm/min, standoff distances from 4.5 to 13.5 mm, and three types of nozzle diameter were used.