• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.327-329
• /
• 2004

Reliability evaluation of the welded structure for industrial structures/facilities such as power plant and petro-chemical refinery facilities is very important, and especially the reliability diagnosis of the structure is based on the exact evaluation of materials properties. But, the conventional Pre-Qualification test had the difficulty of evaluating the real material properties in the field because the test was made on the specimen with the simulated welding for the in-field welding condition. Therefore, a continuous indentation technique was proposed for simple and non-destructive testing of in-field structures and for selective testing of local range such as heat affected zone and weldment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.191-194
• /
• 2002

The tensile properties of materials can be obtained just in accordance with conventional tensile testing methods which are described in several standards. However, the standard testing methods cannot be applicable due to the destructive testing procedure and specimen size requirement for some cases including on-service facility materials. Therefore, simple, non-destructive and advanced indentation technique was proposed. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. In this paper, the research trend of non-destructive evaluation of tensile properties using advanced indentation system and its application fields are reviewed and discussed.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.687-693
• /
• 2006

최근 전 지구적, 혹은 대규모 지역의 분석 및 모니터링을 위한 위성영상의 사용이 늘어나고 있으며 이를 처리하기 위해 빠르고 편리한 '영상좌표 상호등록'방법이 요구되고 있다. 이러한 '영상좌표 상호등록'은 위성의 센서모델 및 천체력 자료를 이용하는 엄밀 모델식을 이용하는 방법과 기 존재하는 기준 영상(Reference image)을 사용하거나 혹은 수치지도를 사용하는 경험적 방법의 두 가지로 분류할 수 있다. '영상좌표 상호등록'의 효율성을 높이기 위해서 저자는 '사전검수 영역기반정합법'(Pre-qualified area matching)을 사용하였다. 이는 Canny 연산자를 이용한 경계추출법, 교차상관계수를 사용한 영역기반정합법(Area based matching), t-분포를 이용하여 95%의 신뢰구간 내에서 과대오차 소거법을 적용한 방법이다. 이러한 사전검수(Pre-qualification) 과정을 통해 연산시간을 현저히 단축시켰고, '영상좌표 상호등록'의 정확도 역시 향상됨을 알 수 있었다. 제안한 알고리즘을 사용하여 프로그램을 작성하고, 한반도 Landsat ETM+ 영상 3장을 이용하여 테스트하였다. 정합점 간의 평균제곱오차는 0.435 영상소, 정합점은 평균 25,573개로 나타났다. 연산 시간은 3.0GHz 1Gb RAM 사양의 컴퓨터에서 평균 약 4.2분으로 나타났다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 GIS/RS 공동 춘계학술대회
• /
• pp.345-349
• /
• 2005

Massive amount of satellite image processing such asglobal/continental-level analysis and monitoring requires automated and speedy georegistration. There could be two major automated approaches: (1) rigid mathematical modeling using sensor model and ephemeris data; (2) heuristic co-registration approach with respect to existing reference image. In case of ETM+, the accuracy of the first approach is known as RMSE 250m, which is far below requested accuracy level for most of satellite image processing. On the other hands, the second approach is to find identical points between new image and reference image and use heuristic regression model for registration. The latter shows better accuracy but has problems with expensive computation. To improve efficiency of the coregistration approach, the author proposed a pre-qualified matching algorithm which is composed of feature extraction with canny operator and area matching algorithm with correlation coefficient. Throughout the pre-qualification approach, the computation time was significantly improved and make the registration accuracy is improved. A prototype was implemented and tested with the proposed algorithm. The performance test of 14 TM/ETM+ images in the U.S. showed: (1) average RMSE error of the approach was 0.47 dependent upon terrain and features; (2) the number average matching points were over 15,000; (3) the time complexity was 12 min per image with 3.2GHz Intel Pentium 4 and 1G Ram.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1881-1883
• /
• 2002

Recently, 345kV XLPE Cable and Accessories have been developed and will be applied for Youngseo$\sim$Youngdeungpo project in Korea. So, let this project and the process of development introduce on this paper. The cable type and length of this project is 345kv XLPE 1C*$2000mm^2$ 66km and all cable will be pulled on cable tunnel. The diameter of cable insulation was designed as 27mm, we could reduce it by appling for hi-tech and super-clean system. Joints were developed by a pre-fabricated type which considered high safety and economic issues. We had also done Pre-Qualification test for verifying the reliance of cable and accessories before construction. As we developed this 345kV XLPE cable system including its accessories at the same time, we can have higher technologies and contribute safe power in transmission lines. In adtionally, we can have a stable status for suppling EHV cable systems to a variety foreign customers by ourselves.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.433-433
• /
• 2012

As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.

• 실천공학교육논문지
• /
• 제11권2호
• /
• pp.251-258
• /
• 2019

카메룬 유일의 직업훈련교사 자격 훈련기관인 '카메룬 국립직업훈련교육원(NIVTPD)'의 설립을 위해 본 연구진은 NIVTPD의 마스터 교사들을 대상으로 교과과정 개발법, 교재 개발 방법 및 개발, 강의전략 수립법 및 강의지도서 작성, 강의계획 및 계획서 작성, 강의안 작성법 등의 역량 강화 훈련을 하였다. 또한 시범연수를 통해 실 강의까지 해봄으로써 실제 NIVTPD의 운영에 대비하였다. 이 논문은 NIVTPD에서의 훈련을 통해 얻은 내용이 강의실 수업 성과에 미치는 영향을 평가하기 위해 두 가지 다른 설문 조사(기초선 및 종료 선 조사)와 두 가지 다른 시험(진입 레벨 테스트(Pretest) 및 성취 수준 시험(Posttest))를 실시한 결과와 그에 따른 분석 결과를 포함한다. 설문 조사 결과는 직업훈련 인터페이스의 현재 상황을 파악하고 커리큘럼을 통합, 수정 및 개선하여 NIVTPD의 교육 프로그램을 개선하는 데 활용될 수 있을 것이다. 또한 시험 결과는 직업훈련교사의 교육학적 지식 수준을 파악하고 향후 자격을 수여하기 위한 지표로 사용될 수 있을 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.898-903
• /
• 2011

위성발사체 액체추진기관 구성품은 발사체의 발사 준비 및 비행을 위해 다양한 작동 mode 및 다양한 환경에서 설계된 성능을 보장하여야 한다. 설계 요건을 충족하는 개발이 이루어졌는지 그리고 개발, 인증, 수락, 조립, 발사 전 시험, 발사 및 비행운용 등의 모든 개발/운용 단계에서 발생 가능한 환경에서 정상작동을 보장하는지를 확인하는 일련의 시험을 통과하여야 실제 목표 궤도에 위성을 투입하기위한 발사체에 장착이 가능하다. 이러한 시험들에 대한 요건들은 이미 발사체 선진국에서는 수십 년의 경험을 바탕으로 그 기준을 마련하고 있다. 현재 한국형발사체 개발을 추진 중인 한국에서도 지난 10여 년간의 액체추진기관을 이용한 발사체 개발에 대한 연구/개발이 있어왔으며, 그 간의 경험을 바탕으로 국내 실정에 맞는 액체추진기관 구성품에 대한 시험요건 구축이 필요하다. 본 논문에서는 국내에서 설정 가능한 액체추진기관 구성품 시험요건에 대한 기준을 고찰하였다.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.339-350
• /
• 2003

국가우주개발 중장기 계획의 일환으로 "통신방송위성(CBS: Communications and Broadcasting Satellite) 탑재체 개발 사업"이 한국전자통신연구원을 중심으로 국내산업체와 공동으로 추진되었다. 통신탑재체는 Ku대역 및 Ka대역 통신중계기와 안테나로 구성되며, 2000년 5월부터 2003년 4월까지 3년 동안 기술검증모델 탑재체가 개발되었다. 본 사업에서 통신방송위성을 위한 위성버스체는 개발되지 않으므로 위성을 이루는 통신탑재체와 버스체의 구성이 완벽하지 않았다. 이러한 문제를 해결하기 위해 위성버스체를 대신할 소프트웨어 위성시뮬레이터의 개발이 요구되었다. 개발에 적용된 위성버스체는 무궁화위성 버스체를 그 대상 모델로 가정하였다. 독립적으로 존재하는 하드웨어 통신탑재체와 소프트웨어 위성시뮬레이터의 연동은 통신탑재체의 기능 시험 및 검증을 목적으로 개발된 전기적 지상시험장치(EGSE: Electrical Ground Support Equipment)의 전력, 원격명령 및 원격측정 시스템(PCTS: Power, Command and Telemetry System)을 통해 이루어지도록 설계되었다. 이러한 시스템 개발을 통해 하드웨어 통신탑재체와 실시간으로 연동되는 Hardware-in-the-loop(HITL) 통신방송위성 시뮬레이터(CBSSIM: CBS Simulator)를 구현하였다. CBSSIM의 위성버스체 모델은 모멘텀 바이어스 삼축 안정화 방식의 정지궤도 위성이고, CBSSIM은 PCTS와 TCP/IP로 연결되고, 통신탑재체는 DC하니스 및 MIL-STD-1553B로 PCTS와 연결된다. CBSSIM은 실시간 처리부을 통해 통신탑재체와 위성버스체 모델로 원격명령을 전송하며, 통신중계기로부터 실제 원격측정 자료와 위성버스체 모델로부터 생성된 원격측정 자료를 수집한다. CBSSIM은 다양한 그래픽 사용자 인터페이스(GUI: Graphic User Interface)를 통해 위성의 상태를 감시할 수 있으며, 통신위성의 발사 전후 및 궤도 운용시의 상태를 모사할 수 있다. 본 논문에서는 객체지향 기법에 의해 위성버스체를 모사한 CBSSIM과 통신탑재체 및 통신탑재체와 CBSSIM을 연동시키는 PCTS를 포함한 HITL시뮬레이터의 설계 및 구현 내용에 관해 기술한다.에 관해 기술한다.

• 한국응급구조학회지
• /
• 제15권3호
• /
• pp.31-44
• /
• 2011

Purpose : The purpose of emergency medical services(EMS) is to save human lives and assure the completeness of the body in emergency situations. Those who have been qualified on medical practice to perform such treatment as there is the risk of human life and possibility of major physical and mental injuries that could result from the urgency of time and invasiveness inflicted upon the body. In the emergency medical activities, 119 emergency medical technicians mainly perform the task but they are not able to perform such task independently and they are mandatory to receive medical direction. The purpose of this study is to examine the recognition and request for medical direction by 119 emergency medical technicians in order to provide basic information on the development of medical direction program suitable to the characteristics of EMS as well as for the studies on EMS for the sake of efficient operation of pre-hospital EMS. Method : Questionnaire via e-mail was conducted during July 1-31, 2010 for 675 participants who are emergency medical technicians, nurses and other emergency crews in Gyeongbuk. The effective 171 responses were used for the final analysis. In regards to the emergency medical technicians' scope of responsibilities defined in Attached Form 14, Enforcement regulations of EMS, t-test analysis was conducted by using the means and standard deviation of the level of request for medical direction on the scope of responsibilities of Level 1 & Level 2 emergency medical technicians as the scale of medical direction request. The general characteristics, experience result, the reason for necessity, emergency medical technicians & medical director request level, medical direction method, the place of work of the medical director, feedback content and improvement plan request level were analyzed through frequency and percentage. The level of experience in medical direction and necessity were analyzed through ${\chi}^2$ test. Results : In regards to the medical direction experience per qualification, the experience was the highest with 53.3% for Level 1 emergency medical technicians and 80.3% responded that experience was helpful. As for the recognition on the necessity of medical direction, 71.3% responded as "necessary" and it turned out to be the highest of 76.9% in nurses. As for the reason for responding "necessary", the reason for reducing the risk and side-effects from EMS for patients was the largest(75.4%), and the reason of EMS delay due to the request of medical direction was the highest(71.4%) for the reason for responding "not necessary". In regards to the request level of the task scope of emergency medical technicians, injection of certain amount of solution during a state of shock was the highest($3.10{\pm}.96$) for Level 1 emergency rescuers, and the endotracheal intubation was the highest($3.12{\pm}1.03$) for nurses, and the sublingual administration of nitroglycerine(NTG) during chest pain was the highest($2.62{\pm}1.02$) for Level 2 emergency medical technicians, and regulation of heartbeat using AED was the highest($2.76{\pm}.99$) for other emergency crews. For the revitalization of medical direction, the improvement in the capability of EMS(78.9%) was requested from emergency crew, and the ability to evaluate the medical state of patient was the highest(80.1%) in the level of request for medical director. The prehospital and direct medical direction was the highest(60.8%) for medical direction method, and the emergency medical facility was the highest(52.0%) for the placement of medical director, and the evaluation of appropriateness of EMS was the highest(66.1%) for the feedback content, and the reinforcement of emergency crew(emergency medical technicians) personnel was the highest(69.0%) for the improvement plan. Conclusion : The medical direction is an important policy in the prehospital EMS activity because 119 emergency medical technicians agreed the necessity of medical direction and over 80% of those who experienced medical direction said it was helpful. In addition, the simulation training program using algorithm and case study through feedback are necessary in order to enhance the technical capability of ambulance teams on the item of professional EMS with high level of request in the task scope of emergency medical technicians, and recognition of medical direction is the essence of the EMS field. In regards to revitalizing medical direction, the improvement of the task performance capability of 119 emergency medical technicians and medical directors, reinforcement of emergency medical activity personnel, assurance of trust between emergency medical technicians and the emergency physician, and search for professional operation plan of medical direction center are needed to expand the direct medical direction method for possible treatment beforehand through the participation by medical director even at the step in which emergency situation report is received.