• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.505-513
• /
• 2017

Measuring the thickness of thin films is strongly required in the display industry. In recent years, as the size of a pattern has become smaller, the substrate has become larger. Consequently, measuring the thickness of the thin film over a wide area with low spatial sampling size has become a key technique of manufacturing-yield management. Interferometry is a well-known metrology technique that offers low spatial sampling size and the ability to measure a wide area; however, there are some limitations in measuring the thickness of the thin film. This paper proposes a method to calculate the thickness of the thin film in the following two steps: first, pre-estimation of the thickness with the phase at the peak position of the interferogram at the bottom surface of the thin film, using white-light phase-shift interferometry; second, accurate correction of the measurement by fitting the interferogram with the theoretical pattern through the estimated thickness. Feasibility and accuracy of the method has been verified by comparing measured values of photoresist pattern samples, manufactured with the halftone display process, to those measured by AFM. As a result, an area of $880{\times}640$ pixels could be measured in 3 seconds, with a measurement error of less than 12%.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.133-137
• /
• 2015

This study was conducted to determine the effects of repetitive transcranial magnetic stimulation (rTMS) integrated mirror therapy on the gait of post-stroke patients. Thirty patients who were six months post-stroke were assigned to either the experimental group (n = 15) or the control group (n = 15). Stroke patients in the experimental group underwent rTMS and mirror therapy for the lower limbs, while those in the control group underwent rTMS and sham therapy. Participants in both groups received therapy five days per week for four weeks. A significant difference in post-training gains for the single support phase, step length, stride length and velocity was observed between the experimental group and the control group (p < 0.05). The experimental group showed a significant increment in the single support phase, step length, stride length, swing phase, velocity, cadence, double support phase and step width as compared to pre-intervention (p < 0.05). The control group showed a significant increment in step length, velocity, cadence and step width compared to preintervention (p < 0.05). Further investigation of the availability and feasibility of rTMS integrated mirror therapy for post-stroke patients as a therapeutic approach for gait rehabilitation is warranted.

• Research in Community and Public Health Nursing
• /
• v.28 no.2
• /
• pp.206-215
• /
• 2017

Purpose: This study aimed to verify the predictive validity of Comprehensive Korean Frailty Instrument (CKFI) among older adults. Methods: A secondary analysis of data from a prospective cohort study was conducted. Frailty was determined in older adults (N=9,188) according to the data in 2008 and the effects of frailty on adverse outcomes (such as institutionalization and death) were evaluated according to the data in 2011. The Cardiovascular Health Study (CHS) index was used to compare with the predictive validity of CKFI. Results: The prevalence of frailty was 26.3%. With the CKFI, the frail group had a higher risk of negative health outcomes compared to the robust and pre-frail groups after three years. The two of the highest risks identified using the CKFI and CHS index were institutionalization (5.522 times higher) and mortality (3.210 times higher). For both instruments, the survival analysis revealed that the risk of death increased as the degree of frailty increased. Conclusion: The CKFI consisting of self-report items and multidimensional aspects of frailty can be used as a simple instrument for assessing the frailty of older adults residing in a local community in Korea.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.74-84
• /
• 2009

The design and implementation of a high performance PID (Proportional Integral & Differential) style controller with zero-phase error tracking property is considered in this article. Unlike a ball screw driven system, the controller in a direct drive system should provide a high level of tracking performance while avoiding the problems due to the absence of the gear system. The stiff mechanical element in a direct drive system allows high precise positioning capability, but relatively high tracking ability with minimal position error is required. In this work, a feasible position controller named 'Unified PID controller' is presented. It will be shown that the function of the closed position loop can be designed into unity gain system in continuous time domain to provide minimal position error. The focus of this work is in two areas. First, easy gain tunable PID position controller without speed control loop is designed in order to construct feasible high performance drive system. Second, a simple but powerful zero phase error tracking strategy using the pre-designed function of the main control loop is presented for minimal tracking error in all operating conditions. Experimental results with a s-curve based position pattern commonly used in industrial field demonstrate the feasibility and effective performance of the approach.

• The Journal of Korea Robotics Society
• /
• v.10 no.2
• /
• pp.61-69
• /
• 2015

In this paper, we propose and examine the feasibility of the robot-assisted behavioral intervention system so as to strengthen positive response of the children with autism spectrum disorder (ASD) for learning social skills. Based on well-known behavioral treatment protocols, the robot offers therapeutic training elements of eye contact and emotion reading respectively in child-robot interaction, and it subsequently accomplishes pre-allocated meaningful acts by estimating the level of children's reactivity from reliable recognition modules, as a coping strategy. Furthermore, for the purpose of labor saving and attracting children's interest, we implemented the robotic stimulation configuration with semi-autonomous actions capable of inducing intimacy and tension to children in instructional trials. From these configurations, by evaluating the ability of recognizing human activity as well as by showing improved reactivity for social training, we verified that the proposed system has some positive effects on social development, targeted for preschoolers who have a high functioning level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.894-899
• /
• 2007

IT Outsourcing has been take place for ages and its range has expanded. The cases are also often take place more but there are a few criteria for making decision of IT outsourcing project. Companies tend to take IT outsourcing as a trend or to follow competitor's IT outsourcing project. This study suggests the criteria for IT outsourcing project before going into the project. The criteria ate to describe what function of the companies need to take outsourcing. Research model is driven by Statistics and AHP method. Also, variables are presented for clear making decision. This model allows the companies find proper IT outsourcing type and conveniences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1057-1061
• /
• 2007

In this study, we investigated the properties of ZnO thin films prepared by layer-by-layer method in RF magnetron sputtering system using AlAs and ZnO targets. Effects of $H_2O_2$ dip prior to thermal treatment were studied as well. Either n-type or p-type films were observed in our study depending on the annealing conditions. It thus indicates the feasibility of arbitrarily modifying the conductivity type. At the same time, it also implies the thermal instabilities of the film properties. Property measurements after stressing the films up to 144 hours showed that thermal variations of properties nay be suppressed by pre-treatment in 30% $H_2O_2$ for 1 min.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.4
• /
• pp.7-14
• /
• 2016

While the idea of the existence of a set of key factors for success in planning, designing and construction of projects is not new, it remains one of the most important issues in the field of construction management. This is due to project success factors are inputs to project management practice which can lead directly or indirectly to project success. This study identifies the success factors which can be used for improving the highway projects performance in Egypt during the project pre-construction and construction phases. Through a detailed literature review 35 success factors are identified. Furthermore, the AHP is adopted to prioritize the studied factors through the application of questionnaire survey. The study establishes that implementing an effective quality control and assurance systems, allow sufficient time for feasibility studies, design, drawing and tender preparation, effective cost control system and frequency of project budget updates, preparing adequate designs and drawings and determining sufficient time to implement the desired scope of work are the most important success factors for enhancing the highway projects performance in Egypt.

• Journal of Radiation Industry
• /
• v.2 no.1
• /
• pp.9-14
• /
• 2008

Livestock wastewater containing high concentrations of organic matters and ammonia-nitrogen has been known as one of the recalcitrant wastewater. It is difficult to treat by conventional wastewater treatment techniques. This study was carried out to evaluate the feasibility of zeolite ion exchange and gamma-ray irradiation treatment of livestock wastewater. The removal efficiencies of $SCOD_{Cr}$ and $NH_3-N$ were significantly enhanced by gamma-ray irradiation after zeolite ion exchange as a pre-treatment. However, the effects of zeolite particle size on the $SCOD_{Cr}$ and $NH_3-N$ removal efficiencies were insignificant. These results indicate that the combined process of zeolite ion exchange and gamma-ray irradiation has potential for the treatment of livestock wastewater.

• Advances in aircraft and spacecraft science
• /
• v.3 no.1
• /
• pp.29-43
• /
• 2016

Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.