• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.193-194
• /
• 2009

본 연구에서는 프리텐션 콘크리트 깊은 보의 강도 및 거동 특성을 모두 반영하여 강도해석을 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현행 설계기준의 스트럿-타이 모델 방법을 부정정 스트럿-타이 모델을 이용한 프리텐션 콘크리트 깊은 보의 강도해석에 합리적으로 적용하기 위해 수직 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿 타이 모델의 하중 분배율을 제안하였다.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2001년도 International Conference CALS/EC KOREA
• /
• pp.597-614
• /
• 2001

Level 0: The Marekting Buzzword : □Confusion between DMU and Visualization □Having a Mobile Data Viewer/Analyser is Anyway a Prerequisite Level 1: Digital Pre-Assembly (DPA): □Building Digital Prototype before Physical Build □Usually a job for Packaging or Prototype Teams □Usually no time Left to take Feed-back into account before Actual Build Level 2: Design in Context: □All Designers within Car Maker do Local DMU before DPA Level 3: Design in Extended Context □Design in Context Expanded to Suppliers(omitted)

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.85-94
• /
• 2004

As over 70% of the total life cycle cost (LCC) of a product is committed at the early design stage, designers are in an important position to substantially reduce the LCC of the products they design by giving due to life cycle implications of their design decisions. During early design stages, there may be competing concepts with dramatic differences. In addition, the detailed information is scarce and decisions must be made quickly. Thus, both the overhead in developing parametric LCC models fur a wide range of concepts, and the lack of detailed information make the application of traditional LCC models impractical. A different approach is needed, because a traditional LCC method is to be incorporated in the very early design stages. This paper explores an approximate method for providing the preliminary LCC, Learning algorithms trained to use the known characteristics of existing products might allow the LCC of new products to be approximated quickly during the conceptual design phase without the overhead of defining new LCC models. Artificial neural networks are trained to generalize product attributes and LCC data from pre-existing LCC studies. Then the product designers query the trained artificial model with new high-level product attribute data to quickly obtain an LCC for a new product concept. Foundations fur the learning LCC approach are established, and then an application is provided.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.38-45
• /
• 2017

FPSO is widely used to develop deep sea oil fields and HHI has constructed ten(10) FPSOs. During these constructions, relevant structural design criteria such as yielding, buckling, fatigue, collision and impact strength were applied to verify structural safety. To apply the buckling strength evaluation for structures, the critical buckling stresses and applied stresses of relevant panels should be calculated. The plate and stiffened panels are to be idealized, which are needed much time and efforts by designers. Therefore, program development is necessary in order to evaluate the buckling strength conveniently and accurately. In this study, the buckling strength assessment system by using offshore code, DNV-RP-C201 was developed under MSC/PATRAN, pre-post program of finite element method. Graphic user interface program is written in MSC/PATRAN PCL functions. Source program to evaluate the buckling strength is developed in FORTRAN programming languages. The developed program is verified by comparing with the results of the Nauticus Hull developed by DNV Classification Society, and applied to the marine construction project conducted by Hyundai Heavy Industries LTD.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.769-770
• /
• 2011

본 논문에서는 정보기술 시스템온칩을 구성하는 방법을 제안하였다. 시스템온칩을 구현하기 위해 설계자는 IP의 재사용을 염두해 두어야 한다. IP 블록은 미리 설계되어지고 검증되기 때문에 설계자는 개별 부품의 올바름과 수행에 대해 거정을 하지 않아도 된다.또한, 정보기술 시스템온침의 임베디드된 코어는 시스템 레벨의 테스트 메카니즘을 호출하여 사용한다. 실제에 있어, IP 블록을 사용하여 조립할 때 아직까지는 error-prone, labor-intensive, time-consuming 과정을 사용한다. 본 논문에서는 시스템온칩 설계자가 IP 블록과 툴을 사용하는 것에 �X점을 맞추었다.

• 한국터널지하공간학회 논문집
• /
• 제8권2호
• /
• pp.151-163
• /
• 2006

대단면 터널에서 시공되는 사전보강공법에 의한 보강영역의 보강효과를 수치해석적으로 모델링하기 위한 다양한 방법이 제시되고 있지만 실무자들은 공학적인 방법보다는 경험적인 방법과 문헌을 참고하여 설계를 수행하고 있다. 따라서 본 연구에서는 상용 프로그램에서 직접적으로 적용할 수 있는 사전보강 영역의 물성치 결정에 있어서 거시적 접근법의 개념을 기반으로 미시적 접근법을 적용한 등가 물성치를 결정하는 기법을 제시하고 3차원 수치해석을 통한 실제모델 해석결과와 다른 여러 미시적 접근법들과의 비교 분석을 수행하여 타당한 보강영역 물성치 결정기법을 제시하였다. 해석 결과 구근과 강관의 병렬연결 강성이 원지반과 직렬로 연결되는 사전보강영역의 직병렬 강성 시스템과, 구근과 강관의 직렬 강성 시스템이 실해와 가장 근사한 변위를 예측하였으나 후자의 경우 그 모델링 과정이 복잡하므로 본 연구에서는 간편법으로써 직병렬 강성 시스템을 제안한다. 직병렬 강성 시스템은 천단변위에 대해 풍화암 지반에서는 약간 안전측으로, 내공변위와 지표면 변위에 대해서는 정밀모델의 결과와 거의 동일하게 거동하는 것으로 분석되었으며 풍화토와 풍화암 지반에서 동일한 변위 경향성을 나타낸다. 본 연구에서 제시된 사전보강영역의 직병렬 강성 시스템은 실제모델로 대표되는 보강지반의 거동 메카니즘을 효과적으로 나타내는 것으로 분석된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.334-338
• /
• 2000

One of the major drawbacks of the existing facility layout methods is that most of them were developed based on pre-defined cost functions, and therefore fail to cope with the dynamic aspects of modern manufacturing systems. Another drawback is that due to the poor representation capability of the block diagrams, they are not able to convey the sufficient information needed by facility designers. In this paper, a system for solving facility layout problem considering these matters in cellular manufacturing environment is proposed and implemented using GA approach with embedded simulation module and virtual reality technologies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1088-1090
• /
• 1999

The radio noise produced by corona discharge in high voltage transmission tines is one of the most important line design considerations. Therefore it is necessary to pre-evaluate radio noise for transmission line designers using Prediction formulas or field test results. In this Paper, more accurate and useful formulas for Predicting radio noise during fair and foul weathers in AC transmission lines were proposed through comparison with the existing formulas. Also it was verified by comparing with the long-term measured data from operating lines that the Proposed formulas are very accurate. The Proposed prediction formulas are developed by the applications of nonlinear least square optimization method to radio noise database collected from lines throughout the world.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.196-204
• /
• 2004

Non-territorial workplace has different characteristic from conventional workplace in terms of interior and architectural design and organization management even the user awareness. The purpose of this study is to examine the non-territorial workplace and suggest needs for improving the quality and efficiency of work. To fulfill this task, information describing various environmental conditions and user awareness were gathered from the non-territorial office in Seoul. Data were collected by using questionnaires regarding general information of user and satisfaction of environmental elements that were established on pre-study. Finally, based on the results of this study, the users of non-territorial workplace seem to be satisfied with utilization of space and working but discontent with psychological element such as privacy, security and affinity. Therefore designers should focused more on psychological elements according to users awareness which is the finding in this study among other elements.

• 한국CDE학회논문집
• /
• 제10권3호
• /
• pp.151-161
• /
• 2005

This paper describes the parting and Boolean operations for a pseudo-solid model of a plastic part, and their application to injection mold design. Here, a pseudo-solid model means a sheet model that looks like a solid model, but its boundary is not closed. When a solid model created in a different CAD system is imported through a standard data exchange file format, in most cases, a pseudo-solid model may be created due to tolerance or some other problems. However, most existing mold design systems based on solid modeling kernels require a complete part solid model. Therefore, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. To eliminate or reduce the healing pre-process for mold design, in this paper, we proposed the parting and Boolean Operations on pseudo-solid part models. This paper also describes their detailed implementation and a case study.