• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.369-382
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of Projects on electronic cash system. Tranport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15-40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.56-62
• /
• 2019

The high-precision laser scriber carries out scribing alumina ceramic substrates for manufacturing ultra-small chip resistors. The ceramic substrates are loaded, aligned, scribed, transferred, and unloaded. The entire process is fully automated, thereby minimizing the scribing cycle time of the ceramic substrates and improving the throughput. The scriber consists of the laser optical system, pick-up module of ceramic substrates, pre-alignment module, TH axis drive work table, automation module for substrate loading / unloading, and high-speed scribing control S/W. The loader / unloader unit, which has the greatest influence on the scribing cycle time of the substrates, carries the substrates to the work table that carries out the cutting line work by driving the X and Y axes as well as by adsorbing the ceramic substrates. The loader / unloader unit consists of the magazine up / down part, X-axis drive part for conveying the substrates to the left and right direction, and the vision part for detecting the edge of the substrate for the primary pre-alignment of the substrates. In this paper, the laser scribing machining simulation is performed by applying the instrument mechanism of each component module. Through this study, the scribing machining process is first verified by analyzing the process operation and work area of each module in advance. In addition, the scribing machining process is optimized by comparing and analyzing the scribing cycle time of one ceramic substrate according to the alignment stage module speed.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.2
• /
• pp.107-115
• /
• 2019

PURPOSE: This study examined the effects of the chopping pattern of proprioceptive neuromuscular facilitation (PNF) on the neglect, balance ability, and activities of daily living in stroke patients with hemi-spatial neglect. METHODS: Twenty stroke patients with neglect volunteered for this study. The subjects were assigned randomly to either the experimental group (EG, n=10) or control group (CG, n=10). The chopping pattern of PNF and exercise therapy were applied in the EG and CG, respectively, for four weeks. Neglect, balance, and activities of daily living were evaluated at the pre-and post-intervention. The assessment tools included a line-bisection test, balance test using Space balance 3D, and modified Barthel index. The pre-and post-intervention values were compared in each group using a paired t-test and the between-group differences were assessed using an independent t-test. Statistical significance was set to ${\alpha}=.05$ for all variables. RESULTS: Significant differences were observed between the EG and CG in terms of neglect, balance, and activities of daily living (p<.05). Both groups showed significant improvement in neglect, balance, and activities of daily living (p<.05). CONCLUSION: These results suggest that the chopping pattern of PNF is effective in improving the hemi-spatial neglect, balance, and activities of daily living in stroke patients with neglect.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1009-1020
• /
• 1996

Direct-seeded rice can have comparable yield with transplanted rice if its inherent problems can be solved. It is a labor-saving technology and can significantly reduce production cost because seedling nursery , pulling , and transplanting are omitted. Turnaround time between cropping is reduced hence the possibility of a third annual crop. But direct-seeded rice is very vulnerable to pest attack (by birds, rats, and golden snails), desiccation, weed infestation, and prone to lodging resulting to unstable crop establishment and inconsistent yield. These problems can be solved by anaerobic seeding (sowing pre-germinated seeds under the soil). It requires precise seed placement into the soil to optimize its benefits. We developed a four-row anaerobic direct seeder (US $ 200 commercial price) for this purpose . It consist of a structural framework mounted with a drum -hopper metering device, flotation type drivewheels, spring-loaded and adjustable furrow closers, and furrow open rs, and a plastic rainguard. It can sow in line pre-germinated seeds into the soil thus permitting the use of mechanical weeders for a chemical-free weed control. Its performance was comparable with the Japanese two-row anaerobic seeder (costing US$400) in terms of seed placement and crop establishment. It was tested with five cultivars. Seeding rate varied from 38 kg/ha to 80kg/ha. Crop establishment ranged from 64 to 99 percent while grain yield varied from 3.0 t/ha to 5.4t/ha. A six-row anaerobic seeder was also developed and adapted to a powertiller for increased capacity , field efficiency , and easier operation. The anaerobic seeder is useful to farmers shifting to direct seeding to reduce rice production cost and to researchers conducting agronomic studies in direct-seeded rice. Blueprint of the machine is available free of charge from IRRI.

• Tuberculosis and Respiratory Diseases
• /
• v.71 no.2
• /
• pp.88-96
• /
• 2011

Background: It is known that cigarette smoke (CS) causes cell death. Apoptotic cell death is involved in the pathogenesis of CS-related lung diseases. Some members of the protein kinase C (PKC) family have roles in cigarette smoke extract (CSE)-induced apoptosis. This study was conducted to investigate the role of PKC epsilon in CSE-induced apoptosis in human lung fibroblast cell line, MRC-5. Methods: Lactate dehydrogenase release was measured using a cytotoxicity detection kit. The MTT assay was used to measure cell viability. Western immunoblot, Hoechst 33342 staining and flow cytometry were used to demonstrate the effect of $PKC{\varepsilon}$. Caspase-3 and caspase-8 activities were determined using a colorimetric assay. To examine $PKC{\varepsilon}$ activation, Western blotting was performed using both fractions of membrane and cytosol. Results: We showed that CSE activated $PKC{\varepsilon}$ by demonstrating increased expression of $PKC{\varepsilon}$ in the plasma membrane fraction. Pre-treatment of $PKC{\varepsilon}$ peptide inhibitor attenuated CSE-induced apoptotic cell death, as demonstrated by the MTT assay (13.03% of control, 85.66% of CSE-treatment, and 53.73% of $PKC{\varepsilon}$ peptide inhibitor-pre-treatment, respectively), Hoechst 33342 staining, and flow cytometry (85.64% of CSE-treatment, 53.73% of $PKC{\varepsilon}$ peptide inhibitor-pre-treatment). Pre-treatment of $PKC{\varepsilon}$ peptide inhibitor reduced caspase-3 expression and attenuated caspase-3, caspase-8 activity compared with CSE treatment alone. Conclusion: $PKC{\varepsilon}$ seem to have pro-apoptotic function and exerts its function through the extrinsic apoptotic pathway in CSE-exposed MRC-5 cells. This study suggests that $PKC{\varepsilon}$ inhibition may be a therapeutic strategy in CS-related lung disease such as chronic obstructive pulmonary disease.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1367-1373
• /
• 2014

This study was conducted to evaluate the effects of heating hatching eggs on the number of day-old chicks, egg temperature and egg weight during extended storage, and to provide basic information for improving hatchability to livestock producers. Eggs (Hy-line) were subjected to the following treatments: "control": eggs were maintained in an incubator after storage for 8 days; "T1": eggs were preheated for 8 hours at $23.9^{\circ}C$ after storage for 8 days in a hatchery; "T2": eggs were initially heated for 8 hours at $37.8^{\circ}C$ in an incubator and then preheated for 8 hours at $23.9^{\circ}C$ in a hatchery after storage for 8 days. The results were as follows: First, at the end of the experiment, the total number of day-old chicks was higher in T1, followed by T2 and then the control. This indicated that chick hatchability may be improved when eggs are preheated. Second, compared with the control, the number of day-old female chicks was expected to be higher in treatments with pre-heating; however, the results indicated the opposite effect. Third, as storage time lengthened, the factor that influenced preheating (the main effect and interactions) was not egg weight but egg temperature measured in the upper, middle and bottom parts of incubator. The temperatures recorded in all treatments ranged from 37.97 to $38.40^{\circ}C$ in the upper parts of incubator, 37.80 to $38.26^{\circ}C$ in the middle parts of incubator, and 37.94 to $38.59^{\circ}C$ in the bottom parts of incubator over storage. In conclusion, preheating was very effective in improving hatchability, and egg temperature was the main factor affecting preheating and hatchability.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.2
• /
• pp.97-110
• /
• 2005

Objectives: Recent studies have shown that tailored messages for cancer screening to the beliefs and stage of cancer screening behavior of individual women increases the take-up probability. Many studies on cancer screening have used the Transtheoretical Model (TTM) to identify variables associated with cancer screening behavior. This study was carried out to identify the cognitive-behavioral factors associated with stomach cancer screening among women aged 40 years and over, and to develop and evaluate a tailored educational program for stomach cancer screening by stages of change. Methods: Building on the TTM constructs, we conducted a quasi-experimental study(N=283) to test the effectiveness of a tailored educational program for endoscopic stomach cancer screening. We carried out pre and post tests in the experimental group(N=162) and the control group(N=121), and the experimental group was subdivided into an on-line group(N=81) and an off-line group(N=81) by educational methodology using e-mail and the postal service. We used the chi-square test, trend test, and paired t-test to test the effectiveness of the program for stomach cancer using a tailored stage-matched messages. Results: To examine the effectiveness of the program for stomach cancer screening by the tailored stage-matched messages, the stage-matched materials were offered to the experimental group(N=162) four times for 4 weeks. The stage-matched materials consisted of the four types for stomach cancer. The tailored message was effective in changing the cognitive-behavioral factors, such as experience process, behavior process, con opinion for stomach cancer, self-efficacy, and the behavioral stages for stomach cancer screening. The stomach cancer screening adherence was higher for the stage-matched materials using postal mail than for those using e-mail. Conclusion: To improve the stomach cancer screening rate, the use of tailored messages for stomach cancer screening will be generated using an expert system. Therefore the implementation of tailored educational program will be supported a partnership between public and private health organizations and increasing awareness of the necessity of community-based interventions.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.74-86
• /
• 1991

The purpose of this study was to evaluate the resulting root canal angulation and shape change after using various enlarging instruments. The mesial canals (120) of extracted human mandibular 1st and 2nd molars were randomly divided into 6 groups; Control, K-type me, Heliapical me, Canal Master me, sonic and ultrasonic instrumentation group. Vertical angulation of each canal was determined by a straight line through the long axis of canal and another straight line through the apical foramen to intersect at the point where the canal began to leave the long axis of the tooth. By recording and comparing the measured angles of the each set of pre-and postinstrumentation. Then, the roots were sectioned horizontally in the apical, middle, coronal thirds and the canal shapes examined, as was the mesiodistal canal diameter as it relates to the external root surface. The results were as follows: 1. Instrumentation using K-type me group resulted in the highest mean change in angulation ($9.900^{\circ}$) (p < 0.005), while Sonic Air MM 3000 group resulted in the least degree of straightening canals ($8.250^{\circ}$) (p < 0.005). 2. Canal Master file group resulted in the best canal shape at the three levels (P < 0.005). 3. Measured minimal mesial root width produced Heliapical me group at the apical 1/3 level, Sonic Air MM 3000 group at the middle 1/3 level, Heliapical me group at the coronal 1/3 level (P < 0.005). 4. Measured minimal distal root width produced Sonic Air MM 3000 group at the apical 1/3 level (P < 0.05), Heliapical me group at the middle 1/3 level (P < 0.005), Canal Master me group at the coronal 1/3 level (P < 0.005). 5. HeIiapical me group produced more increased canal diameter than any other groups (P < 0.005).

• Tuberculosis and Respiratory Diseases
• /
• v.78 no.2
• /
• pp.78-84
• /
• 2015

Background: Reports of therapeutic drug monitoring (TDM) for second-line medications to treat multidrug-resistant tuberculosis (MDR-TB) remain limited. Methods: A retrospective cohort from the Virginia state tuberculosis (TB) registry, 2009-2014, was analyzed for TDM usage in MDR-TB. Drug concentrations, measured at time of estimated peak ($C_{max}$), were compared to expected ranges. Results: Of 10 patients with MDR-TB, 8 (80%) had TDM for at least one drug (maximum 6 drugs). Second-line drugs tested were cycloserine in seven patients (mean $C_{2hr}$, $16.6{\pm}10.2{\mu}g/mL$; 4 [57%] below expected range); moxifloxacin in five (mean $C_{2hr}$, $3.2{\pm}1.5{\mu}g/mL$; 1 [20%] below); capreomycin in five (mean $C_{2hr}$, $21.5{\pm}14.0{\mu}g/mL$; 3 [60%] below); para-aminosalicylic acid in five (mean $C_{6hr}$, $65.0{\pm}29.1{\mu}g/mL$; all within or above); linezolid in three (mean $C_{2hr}$, $11.4{\pm}4.1{\mu}g/mL$, 1 [33%] below); amikacin in two (mean $C_{2hr}$, $35.3{\pm}3.7{\mu}g/mL$; 1 [50%] below); ethionamide in one ($C_{2hr}$, $1.49{\mu}g/mL$, within expected). Two patients died: a 38-year-old woman with human immunodeficiency virus/acquired immune deficiency syndrome and TB meningitis without TDM, and a 76-year-old man with fluoroquinolone-resistant (pre-extensively drug-resistant) pulmonary TB and low linezolid and capreomycin concentrations. Conclusion: Individual pharmacokinetic variability was common. A more standardized approach to TDM for MDR-TB may limit over-testing and maximize therapeutic gain.

• Mass Spectrometry Letters
• /
• v.3 no.1
• /
• pp.25-28
• /
• 2012

Paint Spray is developed as a direct sampling ionisation method for mass spectrometric analysis of additives in polymer-based surface coatings. The technique simply involves applying an external high voltage (5 kV) to the wetted sample placed in front of the mass spectrometer inlet and represents a much simpler ionisation technique compared to those currently available. The capabilities of Paint Spray are demonstrated herein with the detection of four commercially available hindered amine light stabilisers; TINUVIN${(R)}$770, TINUVIN${(R)}$292, TINUVIN${(R)}$123 and TINUVIN${(R)}$152 directly from thermoset polyester-based coil coatings. Paint Spray requires no sample preparation or pre-treatment and combined with its simplicity requiring no specialised equipment makes it ideal for use by non-specialists. The application of Paint Spray for industrial use has significant potential as sample collection from a coil coating production line and Paint Spray ionisation could enable fast quality control screening at high sensitivity.