• Safety and Health at Work
• /
• 제13권2호
• /
• pp.235-239
• /
• 2022

Background: The purpose of present study was to determine the effectiveness of training program based on job stress management in NEDSA and line staff. Methods: The study method of this study was quantitative and quasi-experimental research Methods: From the statistical population (all employees of the NEDSA and line staff in 2020-2021), 30 of these people were selected by judgmental sampling method and considering the inclusion and exclusion criteria. The participants were first matched based on age and education and were randomly divided into experimental and control groups. First, pre-test was taken from both groups (Job Stress Questionnaire). The experimental group was presented with a job stress management training package and no protocol was presented in the control group. After the sessions, post-test was received from both groups (experimental and control). After two months, a follow-up test was performed. Results: The results were entered into SPSS-24 software and analyzed. The results of repeated measure showed high effectiveness of the job stress management package (researcher-made). The results showed that the job stress management training package showed 67.5% effectiveness and also the training effect of job stress management training was stable for two months (follow-up). Conclusion: Based on these results, Training program based on stress management can be effective in military staff.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.61-66
• /
• 2018

Almost every hydraulic system is equipped with a pressure relief valve, to maintain working pressure of the system at a pre-determined level. Thus, dynamic characteristics of such a relief valve, in conjunction with other hydraulic components, are important in designing the hydraulic control system. The single stage pressure relief valve is dynamically undesirable, due to relatively low viscous damping, that causes high frequency oscillations. This problem is overcome by introducing orifices in the inner pilot line, and drain line. In this study, for the single stage spool type pressure relief valve, the system equations were derived through an adequate linearisation and several simplifications were made, to use the transfer function formulation technique. All coefficients were evaluated and used, to make some results by using Matlab software. Results of analysis are compared with experimental results. In this study, parameters affecting stability of valve design are determined and suggested relative to the design.

• BMB Reports
• /
• 제41권3호
• /
• pp.236-241
• /
• 2008

The antioxidant potential of silk protein sericin from the non-mulberry tropical tasar silkworm Antheraea mylitta cocoon has been assessed and compared with that of the mulberry silkworm, Bombyx mori. Skin fibroblast cell line (AH927) challenged with hydrogen peroxide served as the positive control for the experiment. Our results showed that the sericin obtained from tasar cocoons offers protection against oxidative stress and cell viability is restored to that of control on pre-incubation with the sericin. Fibroblasts pre-incubated with non-mulberry sericin had significantly lower levels of catalase; lactate dehydrogenase and malondialdehyde activity when compared to untreated ones. This report indicates that the silk protein sericin from the non-mulberry tropical tasar silkworm, A. mylitta can serve as a valuable antioxidant.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.234-238
• /
• 1998

Parameter estimation of induction motor for vector control presented in this paper can be easily implemented and applied to inverters in the industrial field, because it needs no additional hardware such as voltage sensor and measuring equipment. At first, the stator resistance including switching loss of inverter is measured by simple voltage-current equation. Next, in pre-magnetization of machine by imposing the d-axis constant field-current, q-axis torque current is forced to the machine until its speed feedback reachs to pre-defined level of speed limit. At this time, we can measure the rotor time-constant by decreasing the distorted output-voltage of inverter. At last, stator inductance, transient inductance, and moment of inertia can be measured by the relationship of output voltage, output torque and speed feedback. The validity and usufulness of this method is verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.385-387
• /
• 1996

A novel two stage soft-switching ac-to-dc convener with power factor correction is proposed. The proposed convener provides zero-voltage-switching (ZVS) condition to main switch of boost pre-regulator without auxiliary switch. Comparing to the conventional two stage approach(ZVS-PWM boost rectifier followed by off-line ZVS dc-dc step down converter), the proposed approach is simple and reducing EMI noise problem. A new simple DC-linked energy feedback circuit provides zero-voltage-switching condition to boost pre-regulator without imposing additional voltage and current stresses and loss of PWM capability. Operational principle, analysis, control of the proposed converter together with the simulation results of 1KW prototype are presented.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.440-447
• /
• 2003

Up until today, the key to contouring has been resumed in these two alternatives, either limiting the adipocyte storing capacity by modulating lipogenesis, or by stimulating lipolysis to eliminate adipocyte lipid content. Another interesting way could be the regulation of adipocyte differentiation. In this work, we have evaluated the effect of a brown algal extract of Sphacelaria scoparia (SSE) on the differentiation of pre-adipocytes into adipocytes. A pre-adipocyte line (3T3-L 1) was used. The differentiation was evaluated by the measure of produced lipids thanks to red oil coloration and spectrophotometry, and also by the expression of adipocyte differentiation markers: enzymes such as fatty acid synthase (FAS) and stearoyl CoA desaturase (SCD), or membrane proteins such as glucose transporters (GLUT -4) and fatty acid transporters (FAT) expressed on the surface of human adipocytes. These genes are under control of two transcription factors: CAAT-enhancer binding protein (c/EBP alpha) and sterol response element binding protein (SREBP1). All these markers were analysed at different stages of differentiation by RT -PCR. Sphacelaria extract (SSE) inhibits pre-adipocytes differentiating into adipocytes following a dose-dependant relation, using a kinetics similar to retinoic acid. It decreases the expression of mRNA specific to FAS, FAT, GLUT -4, SCD1, c/EBP alpha and SREBP1. Moreover, SSE regulated on collagen 1 and collagen 4 expression. A stimulation of collagen 1 was also measured in human skin fibroblasts. Thus, SSE performs as a genuine differentiation inhibitor and not only as a lipogenesis inhibitor, and could be used in slimming products.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제25권4호
• /
• pp.245-266
• /
• 2022

This study examines how teaching metacognitive strategies to students in a sixth-grade mathematics class affects their metacognitive awareness. Participants were 36 sixth-grade students in a middle school affiliated with the Ministry of National Education of Turkey in the 2020-2021 academic year. The students in the experimental group (n = 18) were taught a total of 40 mathematics lessons for eight weeks to improve their metacognitive awareness. The students in the control group (n=18) were taught mathematics in line with the regular mathematics curriculum. Using the Jr. Metacognitive Awareness Inventory, participants in both groups took a pre-test at the beginning and a post-test at the end of the study. To better interpret the data obtained, various statistical tests were performed. The pre-test and post-test averages of the groups were compared using the t-test for the normally distributed data for dependent and independent groups. The pre-test results showed no significant difference between the metacognitive awareness scores of the experimental and control groups (p>0.05). The comparison of post-test averages showed that students' metacognitive awareness differed significantly in favor of the experimental group (p<0.05). According to this, it was concluded that metacognitive strategy teaching in mathematics courses positively affected students' metacognitive awareness levels.

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.71-77
• /
• 2005

일반적으로 무인항공기는 비행 전에 계획된 비행항로나 운용자의 실시간 통제에 따라 임무를 수행한다. 성공적으로 임무를 완수하려면 무인항공기와 지상통신장비 간의 통신 가시선 분석 등이 필수적으로 요구된다. 본 논문은 무인항공기의 안전한 비행을 위해 지상통제장비가 임무계획 단계와 임무통제 단계에서 수행하는 여러 가지 분석 기법들을 제안한다. 제안된 기법들은 대부분의 무인항공기 체계에 적용될 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.5-150
• /
• 2001

This paper deals with a modified repetitive control method for compensating automatic gauge control (AGC) to reduce the effect of skid mark which directly influence the quality of products in plate mill process. Since the skid mark on the plate have thermal difference, it makes a different stretching rate and deflection of thickness. Firstly, the (AGC) system and the plate mill process are described by considering function in each control levels. The skid mark of the plate in practical control fields is shown. Also, its frequency variation is given by on-line FFT analysis method. Secondly, a key idea of the modified repetitive control method with time varying period disturbance is represented and compared with standard repetitive control method. Lastly, in simulation ...

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.20-30
• /
• 2001

A 1.8V $650{\;}\textrm{mm}^2$ 4Gb DRAM having $0.10{\;}\mu\textrm{m}^2$ cell size has been successfully developed using 0.11 $\mu\textrm{m}$DRAM technology. Considering manufactur-ability, we have focused on developing patterning technology using KrF lithography that makes $0.11{\;}\mu\textrm{m}$ DRAM technology possible. Furthermore, we developed novel DRAM technologies, which will have strong influence on the future DRAM integration. These are novel oxide gap-filling, W-bit line with stud contact for borderless metal contact, line-type storage node self-aligned contact (SAC), mechanically stable metal-insulator-silicon (MIS) capacitor and CVD Al process for metal inter-connections. In addition, 80 nm array transistor and sub-80 nm memory cell contact are also developed for high functional yield as well as chip performance. Many issues which large sized chip often faces are solved by novel design approaches such as skew minimizing technique, gain control pre-sensing scheme and bit line calibration scheme.