• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2421-2429
• /
• 1996

The objective of this research is to apply effect of the pre-mixed combustion quantity and smoke emission in diesel engine. According as air fuel ratio is increased, emission of smoke concentration is linearly reduced. As Injection timing is advanced, smoke concentration is remarkably reduced. It is considered to be the primary cause of the increase in the premixed combustible mixture during long ignition delay period with advancing injection timing. Smoke is increased with increasing engine speed, so it is considered to be the primary cause of the increase of the mass of fuel injected. Smoke is decreased according to the increase of methanol volume ratio. It is considered that the primary cause of the increase in the quantity of pre-mixed combustion.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2001

Amur cork tree is natural basic and yellow dye largely used for dyeing on cotton. The most effective solvent for extract of berberine from amur cork tree was methanol. The dyeabilities of the colorant on cotton and the fastness of cotton fabrics dyed with amur cork tree extract were investigated. And according to the concentration, temperature and time of pre-treatment, K/S values, wash fastness and Hand Value of cotton fabrics dyed with amur cork tree extract were investigated. As a results, K/S values of dyed cotton fabrics were increased by Pre-treatment with chinese gallotannin and the optimum condition of chinese gallotannin treatment was 15%owf concentration at $60^\circ{C}$, 30min. The wash fastness was enhanced to 3.5 grades. There was no degradations of Hand Value of cotton fabrics treated with chinese gallotannin.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.179-185
• /
• 1996

This study was carried out for the purpose of improving the persimmon vinegar. Crushed persimmon(persimmon pulp) was used at alcohol fermentation using Saccharomyces bayanus for persimmon alcohol medium preparation. Glucose(8.39%) and fructose(7.96%) were the dominant free sugar in persimmon pulp before the at cohol fermentation. They decreased abruptly during alcohol fermentation and glucose was consumed more rapidly than fructose. Final alcohol concentration was finally reached to 8%(v/v) in 5 days for mentation of persimmon pulp. Pectinase pre-treatment of persimmon pulp resulted in tusker contents of galacturonic acid, galactose, methyl alcohol and isoamyl alcohol in main mash for alcohol fermentation than those in main mash prepared without pectinase pre-treatment. After alcohol fermentation tannin concentration was 350ppm and astringency was not perceived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.883-888
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECYD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of 5.3 kgf/cm$^2$to 15.5 kgf/cm$^2$.

• BMB Reports
• /
• v.40 no.6
• /
• pp.1002-1008
• /
• 2007

PreS domain of Hepatitis B virus (HBV) surface antigen is a good candidate for an effective vaccine as it activates both B and T cells besides binding to hepatocytes. This report deals with overexpression and purification of adr subtype of surface antigen that is more prevalent in Pakistan. PreS region, comprising 119 aa preS1 region plus a 55 aa preS2 region plus 11 aa from the N-terminal S region, was inserted in pET21a+ vector, cloned in E. coli $DH5\alpha$ cells and expressed in E. coli BL21 codon+ cells. The conditions for over expression were optimized using different concentrations of IPTG (0.01-5 mM), and incubating the cells at different temperatures (23-$41^{\circ}C$) for different durations (0-6 h). The cells were grown under the given optimized conditions (0.5 mM IPTG concentration at $37^{\circ}C$ for 4 h), lysed by sonication and the protein was purified by ion exchange chromatography. On the average, 24.5 mg of recombinant protein was purified per liter of culture. The purified protein was later lyophilized and stored at $-80^{\circ}C$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.588-595
• /
• 2016

This paper is a study on head bolts that are used in A/C compressors to reduce production cost and solve leak problems on the head bolt seat area that causes massive intermittent malfunctioning during production. In this study, the pre-heat treated steel, which was used as a material in the head bolt, eliminated the heat treatment process after forging. The pre-heat treated steel head bolts, which have 10 % lower tensile strength than the conventional SCM 435 head bolts, were selected after considering the results of creeping rupture properties, axial force, and stress concentration per tensile strength variation. Then, the performance test and the durability test with the A/C compressor that was assembled with the pre-heat treated steel head bolts were performed and verified. Based on the results, the pre-heat treated steel head bolts developed in this study saved 7.3 % in production cost by eliminating the heat treatment process and the logistics process. Furthermore, the leak problem on the head bolt seat area in the A/C compressor was addressed significantly on the mass production assembly line.

• Preventive Nutrition and Food Science
• /
• v.2 no.3
• /
• pp.225-231
• /
• 1997

Thirteen healthy control, 13 pre-eclamptic, 7 diabetic(DM) and 12 gestational diabetic(GDM) pregnant women participated in a study ofthe interrelationships between the levels of protein, calcium, magnesium, phosphorus, zinc and copper in urine. Urinary protein, magnesium and copper levels were significantly higher (p<0.0005, p<0.0003, p<0.005 respectively) in pre-eclamptic women than those of control, DM and GDM women. Urinary zinc excretion in pre-eclamptic women (1.61 mg/g creatinine) was higher than that of DM women (0.81mg/g creatinine); urinary zinc losses of control and GDM women were wre between the other two rups. The GDM women excreted significantly ore phosphorus in their urine in comparison to control and preeclamptic women (p<0.02), but this was not seen in DM women. Among the DM women, urinary protein excretion was positively correlated with glycosylated hemoglobin(r=0.940) and fasting blood glucose concentration (r=0.889). Urinary zinc excretion also was correlated with glycosylated hemoglobin (r=0.853) and fasting blood glucose (r=0.956). In the GDM and pre-eclamptic women there were also significant correlations between urinar calcium and magnesium (r=0.857, r=0.749 respectively) and between urinary protein and copper(r=0.638, r=0.778 respectively).

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.31-41
• /
• 2016

n-type PERT (passivated emitter, rear totally diffused) bifacial solar cells with boron and phosphorus diffusion as p+ emitter and n+ BSF (back surface field) have attracted significant research interest recently. In this work, the influences of wafer thickness, bulk lifetime, emitter, BSF on the photovoltaic characteristics of solar cells are discussed. The performance of the solar cell is determined by using one-dimensional solar cell simulation software PC1D. The simulation results show that the key role of the BSF is to decrease the surface doping concentration reducing the recombination and thus, increasing the cell efficiency. A lightly phosphorus doped BSF (LD BSF) was experimentally optimized to get low surface dopant concentration for n type bifacial solar cells. Pre-oxidation combined with a multi-plateau drive-in, using limited source diffusion was carried out before pre-deposition. It could reduce the surface dopant concentration with minimal impact on the sheet resistance.