• 한국정보과학회논문지:시스템및이론
• /
• 제36권3호
• /
• pp.217-230
• /
• 2009

본 논문에서는 고정 블록이 포함된 회로를 대상으로 하는 새로운 CBL 기반 평면계획 방법을 제안한다. 기존의 CBL 기반의 고정블록 평면계획의 문제점을 파악하고 이를 개선하였다. 제안한 방법은 자유 블록 만으로 구성된 CBL에 고정블록을 삽입하여 윈래 CBL과 그 위상이 유사하고 패킹이 가능한 새로운 CBL을 만드는 방법으로 이를 시뮬레이티드 어닐링에 적용하여 평면계획을 수행한다. 실험결과는 우리가 제안한 평면계획 방법이 고정블록을 효과적이고 효율적으로 배치할 수 있음을 보여준다.

• 한국세라믹학회지
• /
• 제39권7호
• /
• pp.693-698
• /
• 2002

반응소결 탄화규소의 잔류 실리콘 양을 최소화하기 위해 3성분계 탄화규소 분말을 혼합하여 최밀 충전 반음소결 탄화규소를 제조하였다. 기지상의 충전밀도 증가로 인해 반응소결 중 실리콘의 불완전 침윤이 발생하였으며, 이로 인한 잔류 기공은 조대 탄화규소 입자의 표면을 따라 존재함을 확인하였다. 불완전 침윤은 승온 중 분해되지 않고 남은 산화물이 실리콘의 용융 온도 이상에서 분해되어 생긴 고립기공에 의한 것으로 확인되었다. 기지상의 표면에 존재하리라 여겨지는 산화물을 제거하기 위해 침윤전 열처리 및 부식처리를 통해 완전침윤을 달성하였다.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.96-106
• /
• 2014

기존 학계의 FPGA 툴 연구는 단순한 가상 아키텍처 모델 가정에 의존해 왔다. 이러한 제약을 극복하기 위한 첫걸음으로 분석적 배치 및 배치 적법화의 기본 알고리즘들을 상용 FPGA의 아키텍처에 적용하는 실제 상황에서 발생되는 이슈들을 도출하여 대안을 제시한 후 그 효과를 평가하였다. 먼저, 코어 사용률이 낮은 FPGA에서 배치된 셀들의 무게 중심이 칩 중심에서 벗어나는 현상이 발생할 수 있는데 이 변위를 최소화하는 함수를 분석적 배치의 목적 함수에 추가하였다. 또한 배치 밀도 평가의 정확도를 높이기 위해 셀 종류별로 별도의 밀도 행렬을 사용하는 다층 분석, 그리고 자원이 매우 한정된 블록의 조기 고정 방안을 제안하였다. 그밖에, 슬라이스 내에서 두 개의 플립플롭이 제어 핀들을 공유하기 때문에 발생하는 호환성 문제를 개선하기 위한 플립플롭 사전 패킹도 제안하였다. 제안된 기법은 상용 FPGA 아키텍처를 정확하게 모델링하고 수정 개선할 수 있는 K-FPGA 패브릭 평가 툴킷을 근간으로 구현되었으며 12개의 실용 예제에 적용하여 기존 방식에 비해 평균적으로 배선길이 22%, 슬라이스 사용량 5%를 감축하는 효과를 확인하였다. 본 연구는 신규 FPGA 아키텍처 개발을 위한 최적화 CAD 툴 개발 연구의 기초가 될 것으로 기대한다.

• Archives of Plastic Surgery
• /
• 제36권5호
• /
• pp.617-622
• /
• 2009

Purpose: Endoscopic transnasal correction of the blowout fractures has many advantages over other techniques. But after removal of packing material, there were some patients with recurrence of preoperative symptoms. Authors tried to make a quantitative anterograde analysis of orbital volume change over whole perioperative period which might be related with recurrence of preoperative symptoms. Methods: 10 patients with pure medial wall fracture(Group I) and 10 patients with medial wall fracture combined with fracture of orbital floor(Group II) were selected to evaluate the final orbital volume change, who took 3 CT scans, pre-, postoperative and 4 months after packing removal. By multiplying cross - section area of orbit in coronal view with section thickness, orbital volume were calculated. Then, mean orbital volume increment after trauma, mean orbital volume decrement after endoscopic correction and volume increment after packing removal were found out. And we tried to find correlations between type of fracture, initial correction rate and final correction rate. Results: The mean orbital volume increment of the fractured orbits were 7.23% in group I and 13.69% in group II. After endoscopic surgery, mean orbital volume decrement were 11.0% in group I and 12.46% in group II. Mean volume increment after packing removal showed 3.10% in group I and 6.50% in group II. The initial correction rate(%) showed linear correlation with final correction rate(%) after packing removal. And there were negative linear correlation between increment percentage of orbital volume by fracture and final correction rate(%). Conclusion: Orbital volume was proved to be increasing after removal of packing or foley catheter and it was dependent upon type of fracture. Overcorrection should be done to improve the final result of orbital blowout fracture especially when there are severe fracture is present.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.588-592
• /
• 1996

In this paper, we have constructed an expert system for semiconductor chip encapsulation which combines a knowledge-based system with CAE software. The knowledge-base module includes heuristic and pre-analysis knowledge for evaluation and redesign. Evaluation of the initial design and generation of redesign recommendations can be developed from the rules as applied to a given chip Package. The CAE programs can be used for simulating the filling and packing stage of encapsulation process. The expert system is a new tool which enables package design or process conditions with high yields and high productivity.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.124-127
• /
• 2004

Many of research efforts have been focused on the improvement of critical current density (Jc) of silver-sheathed Bi-2223 tapes far practical applications. In this study, the transformation of Bi-2212 phase was investigated, which was transformed to orthorhombic from tetragonal through pre-annealing during powder packing and drawing process. The relationship between hardness of Bi-2212 orthorhombic phase and workability of Bi-2223/Ag tape was investigated. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking and drawing process with different heat-treatment histories. Before rolling process, round wires were pre-annealing at 76$0^{\circ}C$ and in a low oxygen partial pressure. We confirmed that pre-annealing step was to transform to Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However the breakages were created at Ag-alloy clad during rolling for pre-annealed Bi-22231Ag tapes. Several pre-annealing scenarios were introduced to reduce the breakages during rolling process. Microstructure and critical current density of pre-annealed Bi-2223 superconducting tapes were investigated. We could achieve proper pre-annealing conditions for Ag-alloy clad Bi-2223 superconducting tapes.

• 대한두개안면성형외과학회지
• /
• 제10권1호
• /
• pp.7-13
• /
• 2009

Purpose: Endoscopic transnasal correction of the medial orbital fractures cannot be enable to confirm the reduction degree of orbital volume without imaging modalities. We have intended through this study to make a quantative analysis of preoperative orbital volume increment and the reduction degree of that after ethmoidal sinus packing by using CT scan. Methods: In this retrospective study, 22 patients were selected to evaluate the postoperative volume reduction, who took 2 CT scans which are pre- and postoperative under the same protocol. The postoperative CT scan was carried out in about 5 days after the operation with the packing inserted into ethmoidal sinus. The length of bony defect on each section was measured by PACS program and the area of defect was calculated by summing lengths on each section multiplied by the thickness of the section. When the outline of orbit on the slice is drawn manually with a cursor, PACS program measures the area automatically. Orbital volume was calculated from the sum of the area multiplied by the section thickness. Results: The mean dimension of fractured walls was $2.86{\pm}0.99cm^2$. The mean orbital volume of the unaffected orbits was $22.89{\pm}2.15cm^3$ and that of the affected orbits was $25.62{\pm}2.82cm^3$. The mean orbital volume increment of the affected orbits was $2.73{\pm}1.13cm^3$. After surgery, the mean orbital volume of the unaffected orbits was $22.46{\pm}2.73cm^3$ and the mean orbital volume decrease on the surgical side was $2.98{\pm}1.07cm^3$. The estimated correction rate was 118.30%. Conclusion: The orbital volume increment in fractured orbit showed linear correlation with the dimension of fractured area. The orbital volume changes after ethmoidal sinus packing also showed linear correlation with orbital volume increment in fractured orbit. This study showed the regressive linear correlation between the increment of orbital volume and the correction rate. To evaluate the maintenance of reduction state, we think that the further study should be done for comparative analysis of orbital volume change after removal of packing.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권4호
• /
• pp.223-231
• /
• 2020

Background: The most frequent complication of nasotracheal intubation (NTI) is epistaxis. Epinephrine nasal gauze packing has been used conventionally as a pre-treatment for reducing epistaxis, but it carries a disadvantage of pain and anxiety in patients. However, xylometazoline drops are easier to administer and more convenient for patients. We aimed at comparing the effectiveness of xylometazoline drops and epinephrine merocele packing in reducing bleeding and postoperative complications in our population. Methods: Our study enrolled 120 patients in a double-blind randomized controlled trial. We randomly allocated ASA1 or 2 adult patients into 2 groups: Group X and Group E. Group X received 0.1% xylometazoline nasal drops, and epinephrine (1:10,000) merocele nasal packing was used in Group E. The primary outcome was the incidence of bleeding during NTI; the severity of bleeding, navigability, bleeding during extubation, and postoperative complications were secondary outcomes. We used IBM SPSS and Minitab software for statistical analysis, and P < 0.05 was considered statistically significant. Results: We analyzed the data of 110 patients: 55 in Group X and 55 in Group E. The two groups did not have different bleeding incidence (56.4% vs 60.0%; P = 0.70); however, the incidence of severe bleeding was less with xylometazoline than with epinephrine (3.63% vs 14.54%; P < 0.05). We also observed less bleeding during extubation (38.2% vs 68.5%; P < 0.05) with xylometazoline. Other secondary outcomes were akin to both groups. Conclusion: The incidence of severe and post-extubation bleeding was significantly less with xylometazoline. Hence, it may be an effective alternative for reducing the incidence and severity of epistaxis during NTI.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.404-413
• /
• 2006

This study examines multiple quality optimization of the injection molding for Polyether Ether Ketone (PEEK). It also looks into the dimensional deviation and strength of screws that are reduced and improved for the molding quality, respectively. This study applies the Taguchi method to cut down on the number of experiments and combines grey relational analysis to determine the optimal processing parameters for multiple quality characteristics. The quality characteristics of this experiment are the screws' outer diameter, tensile strength and twisting strength. First, one should determine the processing parameters that may affect the injection molding with the $L_{18}(2^1{\times}3^7)$ orthogonal, including mold temperature, pre-plasticity amount, injection pressure, injection speed, screw speed, packing pressure, packing time and cooling time. Then, the grey relational analysis, whose response table and response graph indicate the optimum processing parameters for multiple quality characteristics, is applied to resolve this drawback. The Taguchi method only takes a single quality characteristic into consideration. Finally, a processing parameter prediction system is established by using the back-propagation neural network. The percentage errors all fall within 2%, between the predicted values and the target values. This reveals that the prediction system established in this study produces excellent results.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.413-420
• /
• 2008

In order to utilize cinder melting slag as a filter media to control the quality of early rainwater, its environmental stability was verified by heavy metal elution experiment and improved by pre-treatment. Possibilities of improving its function as an absorbent was considered. Absorption characteristics of melting slag before and after the pre-treatment were analyzed by heavy metal equilibrium and stationary-phase column experiments, which in turn were analyzed by comparison experiment with activated carbon. As a result of heavy metal elution experiment, every metal item existed in a much lower amount than the criteria or was not detected, implying that there is no problem recycling it. Absorption equilibrium experiment showed that the time for pre-treatment melting slag to reach the equilibrium was reduced, while the absorbed amount was greatly increased. Stationary-phase column experiment assures us that the elimination rate was not changed much by influx rate, pH and the change in packing volume rate, indicating that this melting slag can be used not only as a filter media to control the quality of early rainwater but also in many areas of water-processing.