• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.363-368
• /
• 2001

Abutments in Kumdang bridge are massive concrete structures of which total height is l0m, length is 30m, and width is 7m. Therefore, there is every probability that early age thermal cracking such as hydration heat occur. We measure heat of hydration, strains of rebar, and stresses of concrete abutment during construction. Using analysis of measuring data, we examine thermal stresses, and make use of results as method which control thermal cracking. Finally, we develope thermal stress analysis program which have pre/post processor to be easy of accessing and the usefulness of that is estimated through comparison of results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.123-127
• /
• 1998

A computer code has been developed for an analysis of conduction and convection heat transfer on a personal computer. FVM based on unstructured mesh has been employed for triangular and quadrilateral element. All variable of p, u, v, T, k and ${\varepsilon}$ has been defined on a node (not on a center of element). The code possesses the pre-and post-processor for itself to provide user-friendly interface.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.50-55
• /
• 1991

This paper presents database technique for an computer-integrated structural design system of buildings. Network database designed to support all the processes of structural design, such as, planning, modelling, analysis, member design and redesign processes etc. stores all information from user input and system results effectively and so provides centeral communication area between applications. The user interface wi th interactive and batch modes plays roles of building modeler including conventional pre-processor and post-processor. The concepts of 'Planar Surface Modeling' and 'Geometry Zoning' are defined for easy construction of building model. The concept presented in this paper will save the time and memory required for model generation and contribute to data consistency, thus leave a designer more time actually performing the analyses and interpreting the results. The formulation of automating the process of bulilding model ins and structural analysis is the key to study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.649-655
• /
• 1998

In this study, the personal-computer program was developed to predict prestressing losses containment structures of Nuclear Power Plants by concrete creep and shrinkage. This program is constituted of three parts, which are pre-processor, calculation module and post-processor. Input data for his program are : material properties of concrete, rebar, liner and duct, test results of concrete creep and shrinkage, relative humidity, dimension of containment structures, and the number of prestressing tendon related on containment structures. To obtain better results, this program was made to reflect the prestressing losses due to influence that occurred after prestressing each tendon, thus it can predict prestressing losses and allowable prestressing forces of each tendon. As a case study, this program was applied to containment structures of Youngwang 3 & 4 NPP's and analytical result was compared with test results in In-service Inspection of containment structures. From this comparison, it was proved that this program could well predict prestressing losses by concrete creep and shrinkage.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.52-63
• /
• 1997

A CELTHYM(CEll-based Long-Term HYdrologic Model), a pre-processor and a post processor that can be integrated with geographic information system ( GIS) were developed to predict the stream flow of the small watershed. The CELTHYM was calibrated and verified with measured runoff data at the WS # 1 and WS # 3 that are testing water sheds of Seoul Nat' 1 Univ., dept. of agricultural engineering, in Ansan city, Kyunggi province, South Korea. The results of tests are in good agreement with measured data and usable for other application, but the component of direct runoff and water balance on paddy fields need more study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.9-14
• /
• 2000

Computational methods can be classified roughly into two parts: one is the methods based on a potential flow theory, and the other is numerical solvers(CFD) based on Navier-Stockes equation. Methods based on a potential theory are more effective than CFD when the free surface effect is considered. Especially Rankine source method seems to become widespread for simulations of wave making problems. For computations of viscous flow problems, CFD techniques have rapidly been developed and have shown many successful results in the viscous flow calculation. Present paper introduces a computational system 'WAVIS' which includes a pre-processor, potential ant viscous flow solvers and a post-processor. To validate the system, the calculated results for modem commercial hull forms are compared with measurements. It is found that the results from the system are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.145-148
• /
• 2002

A three dimensional FEM system for supporting the design procedure of metal forming processes has been developed by integrating the FEA programs md the CAD interface modules. The system is developed to reduce the time, the extorts and the cost for establishing the successful metal forming processes for the given products. To promote practical application by engineers in medium-size enterprises who do not know much about theories of the FEA and others, various databases and intelligent interfacing modules have been developed in PC environment.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.7-14
• /
• 1998

A graphic user interface program for the design of vehicle suspension system is developed in this work. Graphic templates are designed by using a graphic language and a library and given to users for interactive data input. Several suspension types are graphically given, and the information of hard points can be directly provided on the graphic templates by users. The information is saved in a data structure which can be efficiently accessed, and transformed into another data format. The data transformation is for the interface to an analyzer by which suspension design characteristics can be calculated.

• 한국지진공학회논문집
• /
• 제5권5호
• /
• pp.1-11
• /
• 2001

파랑하중 및 지진하중을 받는 스틸자켓 해양구조물의 기하학적 비선형성을 고려한 정적 및 동적해석을 위한 주처리 및 전/후처리 프로그램을 개발하고 이를 이용한 해석결과를 제시한다. 본 논문에서는 스틸자켓을 기하학적 비선형성을 고려한 공간뼈대구조로 모델링하여, 유체 동하중은 선형파이론과 Stokes 5차이론에 의하여 구해진 파의 속도와 가속도를 이용하여 Morison 방정식에 근거한 파력을 계산한다. JONSWAP 스펙트럼을 이용하여 특정 유효파공의 크기에 따라 불규칙파를 생성하며, 지진하중은 인공지진 가속도 프로그램(SIMQKE)을 이용하여 목표응답스펙트럼에 맞는 다양한 형태의 인공지진 가속도를 이용하여 동적해석법을 제시한다. 선형 동적 해석을 위하여 직접 적분법과 모드 중첩법을 사용하며, 비선형 동적해석시에는 직접 적분법을 적용한다. 또한, 스틸자켓의 극한거동을 추적하기 위하여 뼈대구조의 소성힌지 해석법을 적용한다. 연계논문 에서는 전/후처리 프로그램의 내용을 설명하고 해양환경하중을 받는 스틸자켓의 정적 및 동적해석 결과를 제시한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.25-32
• /
• 1994

The pre-processor for finite to element structural analysis considering the user-friendly device is developed by using GUI. This can be used on WINDOWS' environment which is realized the multi-tasking and the concurrency by object-oriented paradigm. Data input can be done easily through menu, dialog box, automatic stepwise input and concurrent representation with the structural geometry on multiple windows. It in designed to control integratedly the pre-processing, execution and the post-processing of the finite element structural analysis program on multiple windows, and input data can be seen with result outputs at the same time. In addition, the object-oriented programming environment makes convenient revision and addition of the program components for expanding the scope of analysis and making better user environment.