• 환경위생공학
• /
• 제15권3호
• /
• pp.23-23
• /
• 2000

In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The results are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 3994(kudzu), 37%( sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/n ratio 25 indicated 68'C(kudzu), 70'C (sawdust).Optimum condition of consists of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation of gravitationally, dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively Major biological reaction in the aerobic fermentation feed production occurred during 12~14hrs

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권3호
• /
• pp.460-466
• /
• 1999

The huge amount of demand for feedgrains from this region could not possibly be met by producing countries from the other regions. In order to fulfill this increasing demand for conventional raw materials, an alternative for the conventional raw materials produced in the Asia and Pacific region is becoming increasingly more important. A potential alternative is concentrates or non-conventional concentrates produced locally in relative abundance in this region. These feedstuffs include feed grains, by-products from the milling, sugar industries, brewing and distilling industries. Vegetable, citrus, and animal by-products from abattoir, feather meal and blood meal are also possibilities. In addition to more widespread use of unconventional feed sources, the following approach is recommended to improve utilization and performance. These include establishing the nutritive value of non-conventional feeds, quality control to minimize variability, proper storage and processing to assure the nutritive value and prevent mycotoxin contamination, properly balance amino acids with protein sources, supplementation with synthetic amino acids and the use of enzymes to increase digestibility. Currently, practical applications for these resources in feed formulation are negligible despite the potential. The socio-economic aspects will dominate the use of these non-conventional concentrates. In the future, the feed industry will resolve the problems in using locally available raw feed materials.

• 한국전자파학회논문지
• /
• 제23권6호
• /
• pp.756-759
• /
• 2012

본 논문은 한반도 지역에 보편적 위성 통신 서비스를 제공하기 위한 정지궤도 위성의 다중 빔 서비스 커버리지 요구에 따라, 서비스 영역 내의 이득을 높일 수 있는 구현 가능한 안테나 구성 시나리오를 제안하였다. 제안된 시나리오는 위성 탑재가 가능하도록 안테나 및 급전 네트워크 구성을 간소화하고, 제한된 주파수 및 편파자원을 효율적으로 사용하기 위한 급전 네트워크 설계를 포함하고 있다. 또한, 전기적 성능 만족을 위하여 배열소자의 배치 및 여기 계수 최적화가 수행되었다.

• 한국가금학회지
• /
• 제21권2호
• /
• pp.113-117
• /
• 1994

Of the 200, 000 known species of molds, only 50 or 60 are known to be harmful to humans or livestock. Certain fungi that grow on grains and grasses can produce chemical substances called mycotoxins that adversely affect performance in poultry. There are several methods of preserving feed ingredients. The list includes: drying, antioxidants, mold inhibitors, organic acids, phosphates, cooking or toasting, fat extraction, blending and fermenting. Mold inhibitors are manufactured to inhibit mold growth and prevent the production of toxic substances. They are fungistats and not fungicides, that is, they only stop the growth of molds. Practical and cost-effective methods to detoxify mycotoxin containing feedstuffs are in great demand. 0.5% hydrated sodium calcium aluminosilicate added to the diet protected chicks from the deleterious effects of aflatoxin-contaminated feed. The dietary addition of antioxidants and methionine also significantly diminished the negative effects on body weight in chicks toxicated with 3.0 ppm aflatoxin B1.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.840-843
• /
• 1996

This paper presents an adaptive cutting force controller for milling process, which can be attached to most commercial CNC machining centers in a practical way. The cutting forces of X,Y and Z axes measured indirectly from the use of currents drawn by AC feed-drive servo motors. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The robust controller structure is adopted in the whole adaptive control scheme. The conditions under which the whole scheme is globally convergent and stable are presented. The suggested control scheme has been implemented into a commercial machining center, and a series of cutting experiments on end milling and face milling processes are performed. The adaptive controller reveals reliable cutting force regulating capability under various cutting conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.3-8
• /
• 1994

This paper presents a practical method of measuring the cutting force milling process by sensing the feed-drive servo motor current,avoiding the use of a dynamomenter. The relation between the cutting force and the servo motor currents is obtained after the feed-drive system of machining center is modelled. In order to measure the cutting force indirectly, the cutting force in the feed-drive system is regrared as a disturbance, and a disturbance estimator is designed using Kalman filter. A horizontal type machining center is used in the experimental study. A comparison is made between the cutting force measured from the dynamometer and the servo motor current.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권4호
• /
• pp.530-536
• /
• 2014

In a $2{\times}2$ factorial experiment the hypotheses tested were that the metabolic acid load caused by benzoic acid (BA) added to the feed affects bone mineralization of weanling pigs, and that a wide dietary calcium (Ca) to phosphorus (P) ratio in phytase-supplemented feeds with a marginal P concentration has a positive effect on bone mineralization. The four experimental diets, which contained 0.4% P and were supplemented with 1,000 FTU phytase/kg, contained either 5 g BA/kg or no BA and either 0.77% Ca or 0.57% Ca. The 68 four-week-old Large White pigs were fed the experimental diets ad libitum for six weeks and were then slaughtered. Benzoic acid increased feed intake (p = 0.009) and growth rate (p = 0.051), but did not influence the feed conversion ratio (p>0.10). Benzoic acid decreased the pH of the urine (p = 0.031), but did not affect breaking strength and mineralization of the tibia (p>0.10). The wide Ca:P ratio decreased feed intake (p = 0.034) and growth rate (p = 0.007) and impaired feed the conversion ratio (p = 0.027), but increased the mineral concentration in the fat-free DM of the tibia (p = 0.013) without influencing its breaking strength (p>0.10). The observed positive effect of the wide Ca:P ratio on bone mineralization may be attributed, at least in part, to the impaired feed conversion ratio, i.e. to the higher feed intake and consequently to the higher mineral intake per kg BW gain. The negative impact on animal performance of the wide dietary Ca:P ratio outweighs its potentially positive effect on bone mineralization, precluding its implementation under practical feeding conditions.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.14-21
• /
• 2001

Rotary atomizer is widely used in practical application ranging from combustion, cooling, spray drying, agriculture, chemical system. Rotary cup atomizer has some advantages such as extreme versatility and liquid atomization successfully varying widely in viscosity. In rotary atomization, the feed liquid is centrifugally accelerated to high velocity and the liquid extends over the rotating surface as a thin film before being discharged into an atmosphere. The degree of rotary atomization depends upon peripheral speed, feed rate, liquid properties and atomizer design. An important asset is that thickness and uniformity of the liquid sheet can readily be controlled by regulating the liquid flow rate and the rotational speed. LDPA(Laser Diffraction Particle Analyser) and image aquisition system are used to measure drop size distribution and spray pattern. The atomization characteristics of the rotary cup atomizer is investigated experimentally by varing the liquid feed rate, rotary cup speed and air velocity for atomization. As a results, the effect of air velocity on the atomization characteristics such as drop size and spray uniformity is considerably greater than variation of those with liquid feed rate.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.19-22
• /
• 2016

A Superconducting High Gradient Magnetic Separation (HGMS) system is proposed for treatment of feed-water in thermal power plant [1]. This is a method to remove the iron scale from feed-water utilizing magnetic force. One of the issues for practical use of HGMS system is to extend continuous operation period. In this study, we designed the magnetic filters by particle trajectory simulation and HGMS experiments in order to solve this problem. As a result, the quantity of magnetite captured by each filter was equalized and filter blockage was prevented. A design method of the magnetic filter was proposed which is suitable for the long-term continuous scale removal in the feed-water system of the thermal power plant.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.226-234
• /
• 2010

본 논문은 실제적인 변압기 운전환경에서 변화하는 승압형 인덕턴스를 실시간으로 추정하여 그 값을 통해 이득값을 계산하는 전향제어기를 제안하였다. 승압형 인덕턴스는 입력 전류의 변화분과 입력 교류 전압의 측정치만을 이용하여 추정되고, 그 값은 최소자승법을 적용하여 최적화 된다. 제안된 전향제어기는 변압기 운전 환경의 변화에도 강인한 제어가 가능하며, 입력 전류의 고조파 성분을 감소시켜 간섭현상에 따른 성능 저하를 최소화 할 수 있다. 제안된 기법의 타당성은 시뮬레이션과 실험 결과를 통해 검증하였다.