• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.1003-1007
• /
• 2012

A nondestructive technique would be very useful. Advanced NDE T-ray (terahertz ray) techniques of technology and instrumentation has provided a probing field on the electromagnetic spectrum. However, the T-ray is limited in order to penetrate a conducting material to some degree. Here, the T-ray would not go through easily the CFRP composite laminates since carbon fibers are electrically conducting while the epoxy matrix is not. So, investigation of terahertz time domain spectroscopy (THz TDS) was made and reflection and transmission configurations were studied for a 48-ply thermoplastic PPS(poly-phenylene sulfide)-based CFRP solid laminate. It is found that the electrical conductivity of CFRP composites depends on the direction of unidirectional fibers.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.58-62
• /
• 1993

This paper shows the discharge characteristics of liquid nitrogen under plane to plane electrode, needle to plance electrode, inserting teflon insulator in plane to plane electrode at atmospheric pressure. The main experimental device of this paper is cryostat. The important results obtained from this study are sa follows. Breakdown voltage of LN2 under N-P electrode is higher than that of under P-P electrode at atmospheric pressure. Breakdown duration time is longer with increase of electode gap under the P-P, N-P electrodes. The formation of bubbles by evaporation is observed in spite of non-applying source at atmospheric pressure and the creation of corona confirmed. Breakdown voltage and breakdown duration time are in proportion to increase of diameter in case of inserting teflon insulator. Partial discharge characteristics of thickness 0.5[mm] is that 채굼 voltage of teflon insulator rose with increase of diameter in each [pps].

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.655-657
• /
• 2001

일반적으로 위성에 장착된 GPS 수신기는 GPS 위성으로부터 창법 신호를 받아서 위성의 위치, 시간 및 속도 정보를 제공하는 것을 주요 목적으로 하고 있다. 또한 GPS 수신기에서 나오는 1pps 신호를 이용하여 위성체 각 프로세서의 기준시간으로 사용되어진다. 아리랑 위성2호에서는 3개의 프로세서가 탑재되며, 각 프로세서는 원격 측정 명령계. 자세 제어계 그리고 전력계 기능을 담당한다. 3개의 프로세서간의 내부 및 GPS에 동기 시키기 위하여 FEP와 DPLL을 통한 동기화 방식을 사용하며, 위성탑재 소프트웨어에 의한 제어를 필요로 한다. 본 논문에서는 아리랑 위성2호에 동기화 방식과 향상된 1Hz Sync 구조에 대하여 설명한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2009

It establishes the nonlinear optics material recently on solid-state laser output side and from the infrared ray until is early has in the ultraviolet rays and the wavelength of broadband there makes be a possibility of getting the laser light which and in processing and measuring field it is widely used. Consequently, it used the pulse reiteration law from origination and nine as the fundamental wave direct plan it produced. intense it affixed the nonlinear optics material (KTP) in pulsed light and it got the green light. When inflicting a same energy in respectively reiteration mesh, intense interrelation of pulse light output and green light output between. It analyzed the conversion ratio which it follows in the mesh.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.789-797
• /
• 2006

A new method for the GPS repeater based indoor positioning is proposed and its feasibility is verified by experiments in previous paper. But the problems how can identify switching GPS repeater's ID and when switching will be occurred are remained. To solve the problem faced with, we propose the time synchronized switching GPS repeater and the methods of the detection of switching time and the estimation of TDOA. First, switching GPS repeater retransmits the signals synchronized on GPS time, sequentially. Always, first switching time is synchronized with 1 PPS. Second, we formulate the detection of switching time and the estimation of TDOA and propose the various methods. No method is existed absolutely superior to others in any conditions but the method is existed superior to others in specific condition. Finally, feasibility of indoor positioning using time-synchronized switching GPS repeater is evaluated through experiments in anechoic chamber and general environment with multipath.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.193-195
• /
• 2003

This paper presents an approach to estimate the power transmission line parameter by phasor measurement units(PMUs), which are synchronized to 1 pps signal of GPS. Existing approaches to estimate power transmission line parameter, are mainly off-line ones, based on faults or switching events on other neighboring lines. In this paper, to obtain static and dynamic properties of power transmission line parameter in service, the prototype of pmu-based Transmission Line Parameter Monitoring System (TLPMS) is proposed. Also, an technique to estimate parameters of transmission line described as 2-port network model and the soundness of estimated parameters are addressed.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.507-510
• /
• 2005

High voltage pulse power supply using Marx generator and solid-state switches is proposed in this study. The Marx generator is composed of 12 stages and each stage is made of IGBT stack, two diode stacks, and capacitor. To charge the capacitors of each stage in parallel, inductive charging method is used and this method results in high efficiency and high repetition rates. It can generate the pulse voltage with the following parameters: Voltage: up to 120kv Rising time: sub ${\mu}S$ Pulse width: up to $10{\mu}S$, Pulse repetition rate: 1000pps The proposed pulsed power generator uses IGBT stack with a simple driver and has modular design. So this system structure gives compactness and easiness to implement total system. Some experimental results are included to verify the system performances in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.280-288
• /
• 1997

In this paper, we will show that the torque ripple in closed-loop drives of permanent magnet stepping motors is reduced as properly selected lead angle control method. We propose an instantaneous torque equation, which is the function of lead angle, to estimate the influence on torque ripple. We design a closed-loop lead angle control system based on the proposed instantaneous torque equation and measure the instantaneous torque in various excitation modes. It is shown that torque ripple is greatly reduced, as seen from the experimental results as well as from the computer simulation results. For example, torque ripple reduced from 78.25% to 46.82% in the case of 50 PPS single-phase excitation mode operation.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1659-1661
• /
• 2003

Recently, diagnostic techniques have been investigated to defect a partial discharge in high voltage electrical equipment. We have studied the characteristics of the acoustic partial discharge originating from the electrical defects in cubicle GIS(C-GIS). An acoustic emission(AE) sensor is used on the enclosure to detect partial discharge source because the sensor is sensitive to stress waves in its frequency range that may not be from a partial discharge source. AE signal is analyzed with phase-magnitude-frequency number(${\Phi}$-V-n) and pulse per second(PPS). Experience result has shown that the omitted acoustic signal has phase dependency and phase shift characteristic according to increase with applied voltage. These result will be helpful to the pattern recognition of the acoustic partial discharge in a C-GIS.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.2
• /
• pp.48-55
• /
• 2010

This paper proposes a realtime tracking algorithm of mobile object in indoor or outdoor environment. For this purpose the proposed system selects location data closer to mobile objects in real time using Triangulation method and DCM (Database Correlation Method). Also, this system utilizes the adjusted location data selected by using Kalman filter to improve the location accuracy of transfer object. Be studied in existing the Kalman filter have unstable location data until its settlement because of it extracts current values by using the past the information. However, proposed location tracking system don't apply existent Kalman filter to this system and it permits precisional tracking location by using more effective methods.