• Health Policy and Management
• /
• v.10 no.4
• /
• pp.20-56
• /
• 2000

The purpose of this article was to evaluate the effects of reimbursement system on the basis of diagnosis-related groups(DRGs). We searched articles which was published from 1970 to 2000 using MEDLINE ； Key words "diagnosis-related groups, DRGs, prospective payment system, PPS. Then we reviewed 97 articles on classifying them into several categories of contents. It seems that the effects of DRGs in controlling hospitals cost in the U.S. was not clear cut. The U.S. Medicare PPS using DRGs remains vulnerable to compensatory increases in ambulatory care and long-term care facilities utilization despite cost per case and cost per admission being reduced. Also some research indicated the possibilities of deterioration in health care service quality. So putting theses results together, much more consideration is needed before the application of DRGs reimbursement system in Korea. Particularly there is the crucial difference between U.S. health care system and Korean, we must be aware of the limitations of DRGs and revise the DRG system to applicable in Korea.orea.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1696-1698
• /
• 1998

Pulsed Nd:YAG laser using Nd:YAG crystal operates stably in the thermal conductivity, mechanical, optical condition. That is used broadly in material processings because of easy reaction to the materials, and the maintenance is very easy because of lamp excitation. In these material processings, power dinsity control is very important to improve processing technology. Power density is controled by inductance and capacitance or repetition rate. Therefore we are going to control laser power density as One-Chip Microprocessor(PIC16C55) and 8051. We have been experimented at the pulse repetition rate range of 10pps to 60pps(pulse per second).

• The Journal of Korean Physical Therapy
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1995

The purpose of this study was to determine the effects of high voltage pulsed current(HVPC) and low voltage pulsed current(LVPC) on posttraumatic edema formation in frog hind limbs In this study, 16 bullfrogs(Rana Catesbeiana), weighting 189g to 340g were used. Limb 16 anesthetized bullfrogs were systemically injuried by weight drop. One hind limb of each frogs was randomly selected to receive continuous 120 pps HVPC and 100 pps LVPC at $90\%$ of motor threshold(HVPC : 33.3v, LVPC : 0.2-1mA). The opposite hind was remained as a control. A series of six 30-minute treatment(interrupted by 30-minute rest) was begun minutes after injury. The results were as follows. 1. Cathodal HVPC has heed shown to be effective in curbing posttraumatic edema formation in frogs, but anodal HVPC did not effect. 2. Volumes of hind limbs treated with LVPC were not significantly different over time from those of untreated hind limbs. 3. Therefore, waveform(HVPC versus LVPC) seems to influence the efficacy of electrotherapy for edema control. 4. Electrical stimulation were not increased edema formation on frog hind limbs.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.17-22
• /
• 2020

Recently, the decrease in thin film thickness has been actively studied by changing several physical elements such as the increase in revolution velocity of lower substrate equipped with AC or DC motor. In this paper, we propose a novel spin coater control system that changes AC or DC motor and common use software with limitation of velocity and position control into step motor and LABVIEW software based on GUI to control revolution velocity and position more precisely. By determining six input values of rotation velocity 1, 5, 10, 25, 50, 100 PPS, we fabricated six samples using coating target, TA(tantalum) on silicon substrate and measured their thin film thickness by SEM. Hence, this research can be applied to inferring thin film thickness of tantalum regarding any value of revolution velocity without additional experiments and for linear reference model via property analysis of thin film thickness using other thin-film materials.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.303-307
• /
• 2004

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.57-67
• /
• 2003

The logistics cost in Korea is very higher than that of the other countries. Thus, we propose to the way to reduce company's logistics cost in the paper industry. Each company in the paper industry is having its particular sized pallets and using them to manufactured products, store, deliver, retrieve empty pallet and so on. In this reason, the logistics cost is still increasing. As the common introduction of Pallet Pool System to "Paper Industry", the logistics cost could be reduced up to 24% and 1.8 billion won saved approximately, and it possibly attributes to the increase of company profit and the strength of the company competitiveness.itiveness.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.87-95
• /
• 2002

우리나라 기업 물류비는 다른 나라에 비하여 상당히 높다. 따라서 대표적인 기업인 "P" 사를 통하여 기업 물류비를 절감하는 사례를 연구코자 한다. 우선 "P" 사에 PPS(Pallet Pool System)를 도입하기 위하여 납품되는 원부자재를 Unit Load System화 하고 물류 모듈(Module)체계를 확립, 일관파렛트화하여 Pallet Pool System을 도입, 기업물류비를 절감하는 사례이다. 개선 전에는 협력업체에서 1회용 목재 파렛트에 원부자재를 납품하면 "P" 사에서 원부자재 사용 후 폐기하는 System으로 물류비 소모가 많았다. 그러나 PPS 도입으로 협력업체는 물류비를 년간 17.6억원 을 절감하였고, "P" 사는 PPS에 활용되는 STEEL 파렛트에 따른 년 3,600톤의 철강 대체효과를 이루었다. 또한 "P" 사는 1회용 목재파렛트 폐기 비용을 절감하고, 청결한 기업환경을 조성하였으며, 물류비를 절감하여, 기업 이윤을 확대하고 기업경쟁력을 강화시키는데 기여하였다조성하였으며, 물류비를 절감하여, 기업 이윤을 확대하고 기업경쟁력을 강화시키는데 기여하였다

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.211-214
• /
• 2001

For general laser power supply, the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is connected to a switching element in the secondary of the transformer. So the Dower supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition, charged energy of energy-storage capacitor is not transferred sufficiently to flashlamp, and laser output efficiency decreases. In this raper, to improve laser efficiency, we designed and fabricated the power supply in which the SCR was turned on in zero point by the methods of ZCC(zero crossing control), PFN(pulse forming network) in result, laser output efficiency increased by hte 4% other than conventional supply, when a repetition rate was increased by the 10[pps], In 20(pps), efficiency was increased by about 8%

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.367-370
• /
• 2006

A GPS-based time synchronization technique employing a refined HW circuitry and SW algorithm is considered as fine time-management system for Low Earth Orbit (LEO) remote sensing satellites. By synchronizing the On-Board Time (OBT) within satellites to the GPS 1PPS, a very expensive, highly accurate on-board clock is not required to determine the precise on-board time management. Also, the satellite command generation in ground stations and postprocessing of earth observation data which a particular image is acquired. This paper analyses on-orbit verification of the existing satellite time sync architecture and presents a new time sync architecture, operation and relation between the OBT and the GPS time.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.36-41
• /
• 2003

Holographic gratings in two kinds of photopolymers (PPs) were fabricated by optical interference method. Polyvinylalcohol (PVA) and polyvinylacetate (PVAc) were employed as polymer binders and photopolymerization of acrylamide (AA) was confirmed using infrared spectroscopy. Dynamic behavior of the diffraction efficiency was monitored and its temporal stability at room temperature was also observed. Additionally, the temperature dependence of these gratings was investigated in two PPs. The surface topographical change of the photopolymer layer was observed by atomic force microscope (AFM).