• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제39권4호
• /
• pp.35-40
• /
• 2002

Ultra-power-saving SBR has been fabricated by using vanadium and molybdenum with low work function. Because reverse leakage current is increased in inverse proportion to work function, we implanted argon ion on the n-Si layer for decreasing leakage current. The dose and acceleration energy of the argon implantation in the silicon was 1$\times$10$^{14}$ ion/$\textrm{cm}^2$, 40 keV, respectively. The forward voltages drop of fabricated V-SBR and Mo-SBR were 0.25 V and 0.39 V at the same forward current density of 60 A/$\textrm{cm}^2$. As a result, it was found that the reverse leakage current of the fabricated V-SBR was reduced over 20$mutextrm{A}$ by the argon implantation in comparison with the no implanted V-SBR. Also, owing to argon implantation, the inferiority of characteristic of the SBR was not detected.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제47권3호
• /
• pp.157-160
• /
• 2002

This study was carried out to the harvesting efficiency of equipment used fer harvesting of rhizomes of Saururus chinensis Bail. Labor-saving efficiency showed 60-67% enhancement by using tillage operations with power tiller, digger attached to power tiller, and digger attached to tractor compared with manual harvest. Loss percentage of rhizomes by harvesting equipments was 2.2-8.8% lower than by manual harvest. Fresh rhizome yield and income index were increased 3-10% and 13-27% respectively by harvesting equipments, showing the highest yield and index in digger attached to tractor, Thus, digger attached to tractor showed the most effective harvest equipment for Saururus chinensis rhizome.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제22권6호
• /
• pp.842-848
• /
• 2018

The Smart plug is a device that connects between the outlet and the product at home, and it is an IoT type device that can drive energy saving and transmit information to the outside by power on / off control function and power measurement function. In this case, a smart plug that incorporates deep learning of intelligence technology that allows people to learn how to think about a computer, automatically classifies a product as it operates, and automatically tests the operating status of the washing machine by using input AC current pattern. Through this study, even if the product does not function as IoT, it can classify product type and operation state by smart plug connection alone, so we can draw a new paradigm of life pattern and energy saving in one family.

• Environmental and Resource Economics Review
• /
• 제17권2호
• /
• pp.213-233
• /
• 2008

In this paper, we estimate the effects of the two most important means of summer time demand side management in Korean power market: adjustment of vacation or repair timing and the voluntary saving program. We use regression analyses to estimate how effective these two programs are in reducing the peak time demand during the summer. Our results show that adjustment of vacation or repair timing actually reduces the daily peak demand by 0.53 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. The voluntary saving program reduces the daily peak by 0.57 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. However, when we include these two effects in the same regression model, their respective estimated effects become much weaker.

• Journal of the Korea Society of Computer and Information
• /
• 제15권3호
• /
• pp.1-10
• /
• 2010

As processor platforms are continuously moving toward wireless mobile systems, embedded mobile processors are expected to perform more and more powerful, and therefore the development of an efficient power management algorithm for these battery-operated mobile and handheld systems has become a critical challenge. It is well known that a memory system is a main performance limiter in the processor point of view. Although many DVFS studies have been considered for the efficient utilization of limited battery resources, recent works do not explicitly show the interaction between the processor and the memory. In this research, to properly reflect short/long-term memory access patterns of the embedded workloads in wireless mobile processors, we propose a memory buffer utilization as a new index of DVFS level prediction. The simulation results show that our solution provides 5.86% energy saving compared to the existing DVFS policy in case of memory intensive applications, and it provides 3.60% energy saving on average.

• Journal of the Society of Naval Architects of Korea
• /
• 제44권4호
• /
• pp.379-388
• /
• 2007

Ever increasing fuel prices and environmental concerns are forcing commercial vessel operators and designers to re-assess current vessel designs with an emphasis on their propulsion systems. The most important parameter determining propulsive efficiency is the diameter of propeller. Many investigations have been carried out to adapt a large and slow turning propeller known as one of the most robust and effective way of achieving high efficiency in ship propulsion system. However, for the same vessel a further increase of propeller diameter would require the modification of the aft end while still paying attention to the hull clearance to prevent excessive propeller excited vibrations. In order to take the advantage of this approach small workboats (e.g. tug boats, fishing vessels etc.) operate in service with a significant increase of aft draught and hence resulting "inclined keel" configuration can be observed. Although it is not unusual to see large vessels sometimes to operate with stern trim to improve their operational performance and fuel efficiency, it is rare to see a such vessel purposely built with an inclined keel feature to fit a large diameter propeller for power saving. This paper investigates the application of the inclined keel configuration to a 3600TEU container vessel with the aim of fitting an 11 % larger diameter propeller (and hence resulting 17.5 % lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.517-520
• /
• 2005

Wireless sensor network combines sensing and computing technology which can sense light, temperature, vibration, magnetic field and wind etc, as each purpose of using those. Wireless nodes operate signal processing skill which has proceeded sensed information from the sensor, transmission which makes information reached to observer and limited energy managing skill which is needed on account of using battery to operate wireless. To make responsible measuring and sensing out of them, efficient energy management is so important to maintain life time of network. In this paper, after explaining CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) traditional wireless MAC protocol, and ER-MAC(Energy Rate Medium Access Control) which are not managing resource of hardware but MAN(Medium Access Control), data-link layer out of OSI 7 layer. We would like to analyze those efficiency of power saving comparing with each protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제14권8호
• /
• pp.1792-1798
• /
• 2010

Home Gateway is always on for continuous services of home networks. Ubiquitous home networks are extended. so power consumption of home gateways increases by geometric progression. Our algorithm is for home gateway to sleep, listen or wakeup according to network traffic adaptively, as well as to keep always-on service. To do this, it traces the accumulated average of previous sleep periods. In addition to this basic algorithm, we make the profiles for user's living pattern per the day to reflect network usages in detail and adaptively. As the simulation results by comparing with overall accumulated average and per-day accumulated average, in case of the overall accumulated average, the difference the estimation and real value is distributed from 0.43% to 4%. In contrast of this, in case of the per-day accumulated average is distributed from 0.06% to 2%. From this results, we know the profiling of per-day usage pattern can help reduce the difference of the real sleep period and the estimated sleep period.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제29권12호
• /
• pp.55-60
• /
• 2015

PG and RG methods are widely known method for calculating the capacity of the emergency generator in construction electrical installation. PG and RG methods are mainly used as a saving a life, fire protection, fire fighting in construction. Because no long distance between the emergency generator and electric motor feeder, the relatively small motor power in construction electrical installation, the capacity of generator in PG and RG methods are little problem of voltage and reactive power of generator. However in many cases the application of the PG and RG method is difficult in the Chemical Plant because it is long distance between the generator and the motor Feeder and motor capacity is very large. Motor starting power factor is about 0.2 lagging power factor and motor starting current is about 6times during motor staring. Also Most of the staring current component is a reactive power component. therefore, it is many cases that lack of reactive power and excess of allowable voltage drop limit and After selection of emergency diesel generator, problems happen during motor starting. Therefore, to be selection of effective emergency generator, active generator power, reactive power and the required reactive power during large motor starting should be considered in chemical plant. It is also required of the verification process through simulation because hand calculation is very difficult considering study cases.

• The KIPS Transactions:PartD
• /
• 제18D권3호
• /
• pp.197-204
• /
• 2011

Set-top Box which receives broadcasting signal and delivers it to display device such as TV usually doesn't have low-power mode, standby power mode. On the other side, most consumer electronics support standby power mode. The main reasons come from technical barriers and operational stability. Set-top box normally consumes 80~90% power of active mode even though turning off. This is much higher compared to other consumer electronics which consume less than 1W in standby power mode. However, most developed countries including Korea are enforcing the regulations which enhance energy efficiency of set-top box. This paper describes design and development of low-power set-top box. Key technologies are SoC supporting low-power mode, system hardware and software operating in separated power mode, and middleware managing the power with broadcasting system. Finally, we show energy saving expectation through development and proliferation.