• Title/Summary/Keyword: Power-Saving

Search Result 1,284, Processing Time 0.028 seconds

Analysis of the cooling and heating degree days in the Seoul and Yeosu, where HadCM3 is applied (서울과 여수지역에 HadCM3를 적용한 냉」난방도일의 변화량 분석)

  • Yoo, Ho Chun;Noh, Kyoung Hwan
    • KIEAE Journal
    • /
    • v.9 no.4
    • /
    • pp.11-16
    • /
    • 2009
  • To act and respond to the climate changes and to bring about power-saving in buildings, the changes in the atmospheric data in Korea are recorded and assessed. For the two regions representative of Korea, the data obtained from HadCM3 and actual data are compared and analyzed so as to concretely evaluate and confirm the changes taking place in the cooling and heating degree days in Korea. For the past 40 years, from 1996 to 2005, the number of heating degree days was on the decline and in the two representative regions, between 1980's and 1990's, the number of decrease in the heating degree days had been quite large. The number of cooling degree days showed a trend of increase since the 1970's and just as in the case of heating degree days, the extent of increase was quite large between the 1980's and the 1990's. The results of comparison of the number of heating and cooling degree days, one obtained from the "Korea Meteorological Administration" and another from the HadCM3 data (E127.5,N37.5,E127.5,N35), which is one of the ways of predicting the climate, showed similar trends in the number of heating degree days in the Yeosu area. However, in the case of the number of heating degree days in Seoul and the number of cooling degree days both in Seoul and Yeosu, the differences in the number ranged from a minimum of 300 days to a maximum of 1500 days. This could be attributed to the grid points used in the HadCM3, the differences in the values of latitudes and longitudes of these two locations considered in this study, topographical differences, heat island effect caused by population density etc. and while using the HadCM3, these variables factors must be taken into consideration.

Model on Program of Environmental Education for Rural Housewives' Recognition & Practice in Environmental Preservation -Recognition & Practice of Rural Housewives on Environmental Preservation- (환경교육 프로그램을 통한 농촌 주부들의 환경보전 의식 및 실천의 고취 방안 -농촌 주부들의 환경보전 의식 및 실천에 관한 실태-)

  • Kim, Gi-Nang;Gwon, Su-Ae;Kim, Suk-Jong
    • Hwankyungkyoyuk
    • /
    • v.9 no.1
    • /
    • pp.58-71
    • /
    • 1996
  • The purpose of this study was to investigate the rural housewives' recognition and practice on environmental preservation. The subjects of this study were 300 rural housewives living in Chung-buk province. Questionaires were distributed to them during a week from August $25^{th}$ to August $31^{th}$ in 1995. Major findings were as follows: 1. The saved water quite well in washing their faces and the dishes compared with urban housewives, but they did not save water so well in using the lavatory. They used synthetic detergent, one of water pollutants, more often than natural soaps in shampooing and laundering. In addition, they did not use a measuring cup. It resulted in the waste of detergent and aggravation of water pollution. 2. Food waste was disposed of properly, but used batteries were not collected separately. A disposable vinyl bag was more commonly used than a reusable shopping basket. The reason for not using a shopping basket was bothering or uncustomary. Since most of them did not know refillable products of goods with environmental mark, they did not use those. Therefore, housewives should be educated in order to prevent soil pollution. 3. The use of spry-type pesticide and hair treatment, one of air pollutants, was wide-spread among them. They hardly recognized and practiced saving of electric power when they used household electric appliances. 4. The major source of environmental knowledge was mass media like TV of radio. Many of them did not know the practical ways to solve the environmental education program. In conclusion, low level of recognition and practice of rural housewives on environmental preservation indicated that a systematic environmental education program should be developed and implemented.

  • PDF

Current Status and Future of Vermicomposting Industries in Korea (지렁이 퇴비화 산업 현황 및 향후과제)

  • Kim, Jong-Oh;Lee, Chang-Ho
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.9 no.2
    • /
    • pp.52-57
    • /
    • 2001
  • ln this study, the questionnaire survey was performed to obtain the basic data on current situations and challengeable aspects of vermicomposting industries. The questionnaire contained the four main categories such as vermicomposting facilities, feeling marerials, earthworm breeding and cast handling. The results was summarized as followings: 1. Vermicomposting facilities area was becoming larger, and earthworm feed was also expending to various organic sludges. These trends showed that Vermicomposting is being enlightened to treat and recycle the organic wastes in Korea. 2. Present Vermicomposting technology needs the broad land. Because of the high cost of land in Korea, the land saving technology such as multistage must be needed. And present operation practices are mostly based on human power, mechanization and automation is needed. Also, present control practices are based on individual experience need the scientific base control system. 3. Considering situations of organic wastes management in Korea, the technical development and the practical improvement of Vermicomposting as the waste recycling will be needed.

  • PDF

The design of the POCSAG decoder using FPGA (FPGA를 이용한 POCSAG 복호기의 설계)

  • Lim, Jae-Young;Kim, Geon;Kim, Young-Jin;Kim, Ho-Young;Cho, Joong-hwee
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.7
    • /
    • pp.269-277
    • /
    • 1996
  • This paper has been presented a design of a POCSAG decoder in RT-level VHDL and implemented in a FPGA chip, and tested. In a single clock of 76.8KHz, the decoder receives all the data of the rate of 512/1200/2400bps and has maximum 2-own frames for service enhancement. To improve decoder performance, the decoder uses a preamble detection cosidering 9% frequency tolerance, a SCW detction and a ICW detection at each 4 bit. The decoder also corrects a address data and a message data up to 2 bits and proposes the PF (preamble frequency) error for saving battery. The decoder increases a battery life owing to turn off RF circuits when the preamble signal is detected with nises. The chip has been designed in RT-level VHdL, synthesized into logic gates using power view$^{TM}$ of viewlogic software. The chip has been implemented in an ALTERA EPF81188GC232-3 FPGA chip with 98% usability, and fully tested in shield room and field room. The chip has been proved that the wrong detection numbers of preamble of noises are significantly reduced in the pager system using PDI 2400 through the real field test. The receiving performance is improved by 20% of aaverage, compared with other existing systems.

  • PDF

Non-Contact Current Sensor Fabricated with LC Resonators (LC 공진소자를 이용한 비접촉 전류센서 연구)

  • Shin, Kwang-Ho
    • Journal of the Korean Magnetics Society
    • /
    • v.26 no.4
    • /
    • pp.137-141
    • /
    • 2016
  • There is a growing demand for non-contact current measurements for efficient use of electrical power and energy saving. In this study, I propose a non-contact current sensor using LC resonance by a resonance circuit composed of a sensor coil and 2 coupling coils for enabling a wireless measurement. The inductance of the sensor coil, which could be changed by applied current, causes the change of resonance frequency of the resonance circuit. A pair of magnet was attached to the ferrite core to apply a bias magnetic field that enabled the determination of the current direction. We obtained an output voltage change of 18 V with the current of -3~3 A. But, the output was nonlinear. In order to realize the non-contact current measuring method proposed in the present study, there is a need for a strict investigation of linearity and resolution for the future study.

Position Synchronization Control of Single Link Manipulators (단일 링크 머니퓰레이터들에 대한 위치 동기화 제어)

  • Song, Ki-Won
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.48 no.3
    • /
    • pp.6-12
    • /
    • 2011
  • Electric vehicles and robots are real-time distributed control systems composed of multiple drive subsystems using micro controller units. Each control subsystem should be modular, compact, power saving, interoperable and fault tolerable in order to be incorporated into the networked real-time distributed control system. Under the networked real-time distributed control the synchronization problem can be occurred to the position and orientation tracking control due to the load variance, mismatch and time delay between the multiple drive subsystems. This paper suggests two types of position synchronization control of the single link manipulators. One of them is composed of cross controller, Kalman filter and disturbance observer, and the other uses the generation of target trajectories to minimize the gradient vector of the scalar function which is composed of the sum of square errors between the reference input vector and the output vectors. The availability of the proposed control schemes is shown through the control experiments.

A Simple Toeplitz Channel Matrix Decomposition with Vectorization Technique for Large scaled MIMO System (벡터화 기술을 이용한 대규모 MIMO 시스템의 간단한 Toeplitz 채널 행렬 분해)

  • Park, Ju Yong;Hanif, Mohammad Abu;Kim, Jeong Su;Song, Sang Seob;Lee, Moon Ho
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.9
    • /
    • pp.21-29
    • /
    • 2014
  • Due to enormous number of user and limited memory space, the memory saving is become an important issue for big data service these days. In the large scaled multiple-input multiple-output (MIMO) system, the Teoplitz channel can play the significance rule to improve the performance as well as power efficiency. In this paper, we propose a Toeplitz channel decomposition based on matrix vectorization. Here we use Toeplitz matrix to the channel for large scaled MIMO system. And we show that the Toeplitz Jacket matrices are decomposed to Cooley-Tukey sparse matrices like fast Fourier transform (FFT).

The Analysis of heating performance of heat pump system for agricultural facility using underground air in Jeju area - Focused on the Jeju Area - (제주지역 지하공기를 이용한 농업시설용 히트펌프시스템의 난방 성능 분석 - 제주지역을 중심으로 -)

  • Kang, Youn-Ku;Lim, Tae-Sub
    • KIEAE Journal
    • /
    • v.16 no.6
    • /
    • pp.109-114
    • /
    • 2016
  • Purpose: The underground air is the warm air discharged from the porous volcano bedrock 30-50m underground in Jeju, including excessive humidity. The temperature of the underground air is $15-20^{\circ}C$ throughout the year. In Jeju, the underground air was used for heating greenhouses by supplying into greenhouses directly. This heating method by supplying the underground air into greenhouses directly had several problems. The study was conducted to develop the heat pump system using underground air as heat source for resolving excessive humidity problem of the underground air, adopting the underground air as a farm supporting project by Ministry of Agriculture, Food and Rural Affairs(MAFRA) and saving heating cost for agricultural facilities. Method: 35kW scale(10 RT) heat pump system using underground air installed in a greenhouse of area $330m^2$ in Jeju-Special Self-Governing Province Agricultural Research & Extension Services, Seogwipo-si, Jeju. The inlet and outlet water temperature of the condenser, the evaporator and the thermal storage tank and the underground air temperature and the air temperature in the greenhouse were measured by T type thermocouples. The data were collected and saved in a data logger(MV200, Yokogawa, Japan). Flow rates of water flowing in the condenser, the evaporator and the thermal storage tank were measured by an ultrasonic flow meter(PT868, Panametrics, Norway). The total electric power that consumed by the system was measured by a wattmeter(CW240, Yokogawa, Japan). Heating COP, rejection heat of condenser, extraction heat of evaporator and heating cost were analyzed. Result: The underground air in Jeju was adopted as a farm supporting project by Ministry of Agriculture, Food and Rural Affairs(MAFRA) in 2010. From 2011, the heat pump systems using underground air as a heat source were installed in 12 farms(16.3ha) in Jeju.

Design and Implementation of Prototype Anti-disaster Remote Control Robot Model using Smart Phone (스마트폰을 이용한 방재용 원격 조정 로봇의 프로토 타입 모델 설계 및 구현)

  • Choi, Sung-Jai
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.14 no.6
    • /
    • pp.221-227
    • /
    • 2014
  • This paper presented a design which was a minimized remote control robot. This remote control robot was created for preventing life damage from conflagrations, nuclear events and HF gas accidents. This robot's system based smart phone that had camera and GPS systems. When fire came out, The robot figured out that how big fire was, where the fire was started and various aspects of situations. And The robot broadcasted the informations to smart phone using mobile application and wi-fi camera. By doing these, the fire mans could more accurate and be easier to plan a strategy for saving life. The body of robot are 2 parts. One is a car and the other one is a remote controller. By the power, 1step to 10steps, of grabbing remote controller could change the car's speed to move. Also, The prototype robot was already confirmed its utility itself.

Improvement Method of Regional Insulation Standard through the Regional Heating Energy Demand Analysis (권역별 난방에너지 요구량 분석을 통한 단열기준 개선방안)

  • Kim, Jeong-Gook;Ahn, Byung-Lip;Jang, Cheol-Yong;Jeong, Hak-Geun;Haan, Chan-Hoon
    • KIEAE Journal
    • /
    • v.13 no.4
    • /
    • pp.43-48
    • /
    • 2013
  • The effect of climate change has influenced humanity and ecosystem with tremendous changes in temperature. For the past 150 years, the national annual average temperature is 0.6 degree increased and the heating degree day reduced from April to November. However, December to January, the climate change was generated and the heating degree day increased. The blackout occured in 2011 and 2012 by increasing electricity consumption of heating and cooling equipment to the effects of climate change. That is because heating load accounted for 20% of building electric use. In this study, strengthening measures to reduce heating energy consumption is presented due to climate change in winter since 1980 to prevent blackout and reliable power supply for the building energy-saving design standards by Meteorological data provided by the National Weather Service were calculated using the heating degree days in order to present eighteen cities from 1980 to 2012. Insulation standards are presented to prevent black-out by the heating degree days. the heating energy demand was reduced almost 6% including 10% in Central, 5% in South and Jeju area based on strengthening of the insulation. It is applied to the entire country an annual economic effect of 250 billion won, and black-out can be prevented.