• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.127-132
• /
• 2016

Recently, China & Japan have expanded their responding ADIZ(Air Defence Identification Zone) to implement each Government's maritime policy and to project their Air Power in preparation for maritime provocation & contingency, especially over the piled area where East Asia countries have claimed to have maritime jurisdiction one another. So this is to guide the Development Option for Korea Air Defence Identification Zone to cope with the maritime intentions of the neighboring countries, considering the international law for ADIZ, the maritime policy and the maritime sovereign & jurisdiction area of the Republic of Korea, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.332-336
• /
• 1989

This paper describes the nonlinear analysis and effectual operation methods of thermal power plant turbine control system. When the turbine control governor system has dead-zone characteristic, the effectual frequency development control is difficult, because turbine output does not correspond to frequency deviation in dead-zone. Therefore to obtain effectual correspondance, the turbine dead-zone characteristic must be analyzed by proper method. This paper proposes this nonlinear analysis and effectual plant operating load.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.29-35
• /
• 2008

With long time setting, zone 3 impedance relays are considered insensitive to power swings, and their operation condition during power swings is seldom analyzed. Instead of ti me-consuming simulation to the swing loci, their operation condition is directly quantified by polynominal functions in this paper to find the critical swing angle and frequency for relay operation under different relay settings and system parameters. It is found: (1) the swing loci are more densely populated inside than outside of the protection region, which corresponds to long residence time and possible relay operations; (2) the relays may be sensitive to load encroac hments and stable power swings with different relay settings and system parameters; (3) the critical swing frequency may be in the range of low-frequency power swings.

• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.161-167
• /
• 2004

Zone 3 of the distance relay is used to provide the remote back-up protection in case of the failure of the primary protection. However, the risk lot mal-operations under stressed conditions such as heavy loading, voltage and transient instability is usually high. Zone 3 is used in combination with the derivatives of the voltage, and current, etc to prevent mal-operations. Sometimes, the impedance characteristics that restrict the tripping area of relay are used to avoid the mal-operations due to load encroachment. This paper presents a novel Zone 3 scheme based on combining the steady-state components (i.e. 60Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operates correctly for the various events.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.140-146
• /
• 2005

Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.593-600
• /
• 2019

The combustion characteristics of methane/hydrogen pre-mixed flame have been investigated with swirl stabilized flame in a laboratory-scale pre-mixed combustor with constant heat load of 5.81 kW. Hydrogen/methane fuel and air were mixed in a pre-mixer and introduced to the combustor through a burner nozzle with different degrees of swirl angle. The effects of hydrogen addition and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using particle image velocimetry (PIV), micro-thermocouples, various optical interference filters and gas analyzers to provide information about flow velocity, temperature distributions, and species concentrations of the reaction field. The results show that higher swirl intensity creates more recirculation flow, which reduces the temperature of the reaction zone and, consequently, reduces the thermal NO production. The distributions of flame radicals (OH, CH, C₂) are dependent more on the swirl intensity than the percentage of hydrogen added to methane fuel. The NO concentration at the upper part of the reaction zone is increased with an increase in hydrogen content in the fuel mixture because higher combustibility of hydrogen assists to promote faster chemical reaction, enabling more expansion of the gases at the upper part of the reaction zone, which reduces the recirculation flow. The CO concentration in the reaction zone is reduced with an increase in hydrogen content because the amount of C content is relatively decreased.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.485-497
• /
• 2024

Ring beam is the main anchorage zone of the tendons in the nuclear power prestressed concrete containment vessel (PCCV). Its safety is crucial and has a great influence on the overall performance of PCCV. In this paper, two half-scale ring beams were tested to investigate the mechanical performance of the anchorage zone in the PCCV under multidirectional pressure. The effect of working condition with different tension sequences was investigated. Additionally, a half axisymmetric plane model of the containment was established by the finite element simulation to further predict the experimental responses and propose the local reinforcement design in the anchorage zone of the ring beam. The results showed that the ultimate load of the specimens under both working conditions was greater than the nominal ultimate tensile force. The original reinforcement design could meet the bearing capacity requirements, but there was still room for optimization. The ring beam was generally under pressure in the anchorage area, while the splitting force appeared in the under-anchor area, and the spalling force appeared in the corner area of the tooth block, which could be targeted for local strengthening design.

• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.306-311
• /
• 2006

WiBro/WLAN Hierarchical 네트워크 구성 시 듀얼모드 단말기는 Hotspot 지역 이외의 WiBro 네트워크만 존재하는 지역에서도 Vertical 핸드오프를 위해서 항상 WLAN 모듈을 Power on 상태로 유지해야 한다. 핫스팟 지역이 아닌 WiBro 네트워크에서도 듀얼모드 단말기의 WLAN 모듈을 Power on 상태로 유지하기 때문에 사용자의 단말은 불필요한 전력을 소모하게 된다. 본 논문은 이를 보완할 수 있는 WiBro/WLAN Hierarchical 네트워크에서 듀얼모드 단말기의 Power Saving 전략에 관해 다루었다. 본 논문에서는 WiBro 네트워크 내의 핫스팟에 대한 정보를 이용하여 듀얼모드 단말기의 효율적인 Power Saving 전략을 수립하고자 한다.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4664-4670
• /
• 2010

본 연구에서는 기존 MIM Zone model과 새로이 유도한 모델과 비교를 통해 몇가지 결론을 도출하였다. MIM model 이 적용되면 immobile 영역에서의 초기농도는 기공의 형태에 의해 달라지는 보정계수에 의해 실제농도보다 저평가되었으며 이는 오직 확산이 기공의 가장 깊은 부분까지 시행된 이후에 유효함을 확인하였다. 물질이동계수, $\alpha$는 기공의 깊이에 따라 반비례하며, 유동 구역의 유속에는 종속되어지지 않는다. 기존의 MIM model 은 확산주도영역의 농도가 급속하게 감소하는 현상을 보여주는데 새로이 유도된 모델의 경우도 충분한 시간이 경과한후 비슷한 현상을 보였으며 이는 기존의 여러 실험에서 관찰된 power-law BTC 의 상반되는 결과를 보여준다.