• Resources Recycling
• /
• v.29 no.4
• /
• pp.15-30
• /
• 2020

Recently, it is increasing a amount of installed solar-cell rapidly, and end-of-life photovoltaic(ELP) modules are generated in according to the reduction of cell efficiency largely. Recycling of ELP modules are begun at an advanced nation already, but there are bring about environmental contamination and resource recovery problems owing to not treated ELP modules because of economic cost completely. First of all, there were researched basic study for treatment conditions of used solar cell inspection, dismantling of aluminum frame, crushing / grinding & separation of tempered glass, removal of back sheet & EVA film, leaching & precipitation recovery of valuable metals and treatment of waste water. Therefore, we establish optimum conditions through carried out of designed apparatus, installation of equipment, test operation & trouble shooting in scale of 1ton/day pilot plant test. Following to economic review, it does have the economic efficiency until to the case of tempered glass recovery, but does not have the economic value in case of total processes until to recover the valuable metals. However, there are guaranteed economic value if we are gained a large amount of the expenses through EPR supported system. It was confirmed the commercialized possibility of ELP modules recycling if there were established on the collecting ELP modules, reusing criteria, economical technology, enactment of directives and enforcement of EPR supported system efficiently.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.534-548
• /
• 2021

In this paper, the feasibility of generating solar power near an abandoned quarry is examined with the objectives of resolving the essential problems that quarries encounter, such as rockfalls and space usage issues. On an abandoned quarry site in Sadang, Seoul, Republic of Korea, two different PV installation methods were analyzed. The first is attaching PV directly on the quarry slope. Since there are no corresponding safety standards and precedents for installing solar panels directly on slopes, the power generation potential was calculated by using topographic data and reasonable assumptions. The surface area of cut slope section was extracted from the Digital Elevation Model(DEM) via ArcGIS and Python programming to calculate the tilt and power capacity of installable panels. The other approach is installing PV as a rockfall barrier, and the power generation potential was analyzed with the assumption that the panel is installed in the direction of facing solar irradiation. For the derivation of power generation, the renewable energy generation analysis program SAM(System Advisor Model) was used for both methods. According to the result, quarries that have terminated resource extraction and remain devastated have the potential to be transformed into renewable energy generation sites.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.233-246
• /
• 2023

In terms of understanding the water cycle and efficient water resource management, the importance of soil moisture has been highlighted. However, in Korea, the lack of qualified in-situ soil moisture data results in very limited utility. Even if satellite-based data are applied, the absence of ground reference data makes objective evaluation and correction difficult. The cosmic-ray neutron probe (CRNP) can play a key role in producing data for satellite data calibration. The installation of CRNP is non-invasive, minimizing damage to the soil and vegetation environment, and has the advantage of having a spatial representative for the intermediate scale. These characteristics are advantageous to establish an observation network in Korea which has lots of mountainous areas with dense vegetation. Therefore, this study was conducted to evaluate the applicability of the CRNP soil moisture observatory in Korea as part of the establishment of a Korean cOsmic-ray Soil Moisture Observing System (KOSMOS). The CRNP observation station was installed with the Gunup-ri observation station, considering the ease of securing power and installation sites and the efficient use of other hydro-meteorological factors. In order to evaluate the CRNP soil moisture data, 12 additional in-situ soil moisture sensors were installed, and spatial representativeness was evaluated through a temporal stability analysis. The neutrons generated by CRNP were found to be about 1,087 counts per hour on average, which was lower than that of the Solmacheon observation station, indicating that the Hongcheon observation station has a more humid environment. Soil moisture was estimated through neutron correction and early-stage calibration of the observed neutron data. The CRNP soil moisture data showed a high correlation with r=0.82 and high accuracy with root mean square error=0.02 m³/m³ in validation with in-situ data, even in a short calibration period. It is expected that higher quality soil moisture data production with greater accuracy will be possible after recalibration with the accumulation of annual data reflecting seasonal patterns. These results, together with previous studies that verified the excellence of CRNP soil moisture data, suggest that high-quality soil moisture data can be produced when constructing KOSMOS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.349-354
• /
• 2010

Fuel cells have attracted enormous interest as new power sources because the cells can be used to solve the problem of environmental pollution as well as the natural-resource exhaustion problem. In this study, hydrogen-gas flow in microchannels of different shapes was numerically analyzed to improve the efficiency of a microfuel cell. Flow characteristics in six microchannels of different shapes but under identical boundary conditions were simulated. The analysis result shows that the flow characteristics such as velocity, uniformity, and flow rate, greatly depend upon the channel shape. This implies that the efficiency of microfuel cell can be expected to be increased by adopting the optimal configuration of channel shape for hydrogen-gas flow. The experimental results show that power density of a PEMFC with a microflow channel is higher than that of a PEMFC without a microflow channel; however, a durable catalyst is required in MEA.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.79-84
• /
• 2013

For the diversity of energy supply system and the improvement in the habitants' living environments of the islands, it is possible and necessary to use the natural energy as resources of the electric power generation system. In this study, the characteristics of wind and solar radiation on 4 islands offshore Namhae-Tongyoung of Korea were measured for one year from November 2010 to October 2011 and analyzed in relation to energy resources survey. As a result of measurement and analysis, the respective wind rose diagrams of 4 islands were made, and showed that the frequencies of wind directions were quite different from among the islands. The Rayleigh probability distribution of wind velocity showed that the wind speeds of KR and SS were mainly 2~5m/s, and the respective quantities of electric power generation of 4 islands were shown to be different. The variation of solar radiations and potential quantity of those uses were measured to be similar to each other among 4 islands.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.24-28
• /
• 2014

With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.853-860
• /
• 2011

In this paper, we proposed a transmission scheme for a full-duplex relay system that minimizes outage probability. A relay system with the full-duplex relay can mitigate resource inefficiency of a half-duplex relay system. However, the mobile station suffers from the interference because the base station and the relay station transmits signal simultaneously to the mobile station. First, we suggest a layered broadcasting for full-duplex relaying. Second, we derive an optimal power allocation for the layered broadcasting in terms of the outage probability minimization. The proposed algorithm shows better performance than a half-duplex relaying system with and without the diversity, and a conventional full-duplex relaying system.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1145-1155
• /
• 2000

The purpose of this study is to explore the concept spirituality and to gain understanding of nursing intervention that may improve spiritual well-being. The concept analysis framework developed by Walker and Avant (1995) was used to clarify the concept. In the study, 'Harmonious interconnectedness', 'Transcendence', 'Integrative Energy' and 'Purpose and Meaning in Life' emerged as the critical attributes of spirituality. The first attribute, 'harmonious Inter- connectedness', has three categories including intrapersonal, (self), interpersonal (others/ nature) and transpersonal (the Supreme Being). The second attribute, 'Transcendence', is defined as the ability to extend one's own self beyond the limits of usual experiences and to achieve new perspectives. This attribute is demonstrated by 'coping with situations', to 'self-healing', and 'transformation'. The third attribute of spirituality is 'Integrative Energy', which integrates all dimensions and acts as a creative and dynamic force that keeps a person growing and changing. 'Integrative Energy is also defined as an inner resource that gives a sense of empowerment. Therefore the highly spiritual person demonstrate 'inner peace', 'growing', 'inner strength,' and 'well-being'. The fourth attribute 'Purpose and Meaning in Life' represents a sense of connectedness with one's inner values and with a greater purpose in life. It is demonstrated by 'hope' and 'a powerful life'. In this study, the antecedents of the spirituality represented as 'spirit' and its potential enablers were 'Introspection/reflection', 'Interconnectedness with all living things', and an 'Awareness of a Higher-Power'. The consequences of this concept may be described as 'physical, psychosocial, and spiritual well-being'. Empirical referents of this are 'purposeful life' 'self-worth' 'hope' 'love' 'service' 'forgiveness' 'trust/belief' 'inner peace' 'self-actualization' 'religious practices' 'transformation' 'inner strength' and 'coping'. In conclusion, spirituality can be defined based on these critical attributes. Spirituality is a dynamic, integrative energy based on a feeling of harmonious interconnection with self, others and a higher power. Through it, one is enabled to transcend and to live with meaning and purpose in life.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.6
• /
• pp.56-62
• /
• 2009

Inexpensive high performance computer systems combined with high speed networks and machine independent communication libraries have made cluster computing a viable option for parallel applications. In a heterogeneous cluster environment, efficient resource management is critically important since the computing power of the individual computer system is a significant performance factor when executing applications in parallel. This paper presents a dynamic task manager, called DWM (dynamic work manager). It makes a heterogeneous cluster system fully utilize the different computing power of its individual computer system. We measure the performance of DWM in a heterogeneous cluster environment with several kernel-level benchmark programs and their programming complexity quantitatively. From the experiments, we found that DWM provides competitive performance with a notable reduction in programming effort.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.19-23
• /
• 2017

Energy is a vital resource for the economic growth and the social development for any country. As the industry becomes more sophisticated and the economy more grows, the electricity demand is increasing. So forecasting electricity demand is an important for electricity suppliers. Forecasting electricity demand makes it possible to distribute electricity demand. As the market for Negawatt market began to grow in Korea from 2014, the prediction of electricity consumption demand becomes more important. Moreover, power consumption forecasting provides a way for demand management to be directly or indirectly participated by consumers in the electricity market. We use Genetic Algorithms to predict the energy demand of the fishing industry in Jeju Island by using GDP, per capita gross national income, value add, and domestic electricity consumption from 1999 to 2011. Genetic Algorithm is useful for finding optimal solutions in various fields. In this paper, genetic algorithm finds optimal parameters. The objective is to find the optimal value of the coefficients used to predict the electricity demand and to minimize the error rate between the predicted value and the actual power consumption values.