• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.691-698
• /
• 2015

Recently, the power industry has a great interest in the superconducting energy storage device as a way to maximize energy efficiency to cope with global warming. A superconducting energy storage device can archive maximization of electric energy use efficiency by storing in the form of a magnetic field energy or a kinetic energy without loss a large amount of electrical energy at the non-peak load and then converting it again into electric energy at the peak load. Therefore, in this study, such as the concept of the superconducting energy storage technologies, the present state of its research and development and its applications are surveyed and analyzed to establish methodology applying the superconducting energy storage technologies to power system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.39-49
• /
• 2011

Smart Grid has two main objectives on both supply and demand aspects which are to distribute the renewable energy sources on supply side and to develop realtime price responses on demand side. Renewable energy does not consume fossil fuels, therefore it improves the eco-friendliness and saves the cost of power system operation at the same time. Demand response increases the flexibility of the power system by mitigating the fluctuation from renewable energies, and reduces the capacity investment cost by shedding the peak load to off-peak periods. Currently Smart Grid technologies mainly focus on energy monitoring and display services but it has been proved that enabling technologies can induce the higher demand responses through many pilot projects in USA. On this context, this paper provides a price responsive algorithm for HEMS (home energy management system) on the real time pricing environment. This paper identifies the demand response as a core function of HEMS and classifies the demand into 3 categories of fixed, transferable, and realtime responsive loads which are coordinated and operated for the utility maximization or cost minimization with the optimal usage combination of three kinds of demand.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.599-608
• /
• 2014

This paper studies a parallel relay network where the relays employ an amplify-and-forward (AF) relaying scheme and are subjected to individual power constraints. We consider correlated effective relay noise arising from practical scenarios when the relays are exposed to common interferers. Assuming that the noise covariance and the full channel state information are available, we investigate the problem of finding the optimal AF scheme in terms of maximum end-to-end transmission rate. It is shown that the maximization problem can be equivalently transformed to a convex semi-definite program, which can be efficiently solved. Then an upper bound on the maximum achievable AF rate of this network is provided to further evaluate the performance of the optimal AF scheme. It is proved that the upper bound can be asymptotically achieved in two special regimes when the transmit power of the source node or the relays is sufficiently large. Finally, both theoretical and numerical results are given to show that, on average, noise correlation is beneficial to the transmission rate - whether the relays know the noise covariance matrix or not.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1769-1777
• /
• 2018

This paper proposes a method for optimal placement of Phasor Measurement Units (PMUs) considering system configuration and its attributes during the planning phase of PMU deployment. Each bus of the system is assessed on four diverse attributes; namely, redundancy of measurements, rotor angle and frequency monitoring of generator buses, reactive power deficiency, and maximum loading limit under transmission line outage contingency, and a consolidated 'degree of criticality' is determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The major contribution of the proposed work is the development of modified objective function which incorporates values of the degree of criticality of buses. The problem is formulated as maximization of the aggregate degree of criticality of the system. The resultant PMU configuration extends complete observability of the system and majority of the PMUs are located on critical buses. As budgetary restrictions on utilities may not allow installation PMUs even at optimal locations in a single phase, multi-horizon deployment of PMUs is also addressed. The proposed approach is tested on IEEE 14-bus, IEEE 30-bus, New England (NE) 39-bus, IEEE 57-bus and IEEE 118-bus systems and compared with some existing methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.98-106
• /
• 2007

This paper represent improved on-line turn off angle control schemes for switched reluctance motors based on current control. For the purpose of finding the optimal commutation switching angle point with improved controller, it is utilized turn on and turn off position calculation with inductance vs. current vs. not linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and torque ripple reduction and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated simulation and on a prototype experimental system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.288-289
• /
• 2019

This paper studies the secrecy capacity for a wireless cooperative network with perfect channel state information at the relays, and receiver. A similar assumption is also made for the instance where there exist a direct link between the transmitter and receiver. Physical Layer security techniques are employed in wireless networks to mitigate against the activity of eavesdroppers. It offers a viable alternative to computationally intensive encryption. In this paper the design of a protocol utilizing jamming (via jamming nodes) for better security and relaying (via relay nodes) for the amplify-and-forward (AF) operation, is investigated. A a signal-to-noise variant of secrecy known as secrecy gap is explored because of its use of lesser computational power - preferable for practical systems. Thus we maximize this signal-to-noise approach instead of the conventional secrecy capacity maximization method. With this, an iterative algorithm using geometric programming (GP) and semi-definite programming (SDP) is presented with appreciable benefits. The results show here highlight the benefits of using fractional components of the powers of the relays to offer better secrecy capacity.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.100-105
• /
• 2017

In this paper, we study an interference avoidance scenario in the presence of a interferer which can rapidly observe the transmit power of backscatter communications and effectively interrupt backscatter signals. We consider a power control with a sub-channel allocation to avoid interference attacks and a power-splitting ratio for backscattering and RF energy harvesting in sensors. We formulate the problem based on a Stackelberg game theory and compute the optimal transmit power, power-splitting ratio, and sub-channel allocation parameter to maximize a utility function against the interferer. We propose the utility maximization using Lagrangian dual decomposition for the backscatter communications and the interferer to prove the existence of the Stackelberg equilibrium. Numerical results show that the proposed algorithms effectively maximize the utility, compared to that of the algorithm based on the Nash game, so as to overcome a malicious interference in backscatter communications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1117-1122
• /
• 2019

In this paper, a power allocation scheme is proposed to improve the fairness of user data rates in downlink non-orthogonal multiple access systems with one base station and two users. In particular, the power allocation scheme is presented to maximize the fairness of average user data rates assuming independent Rayleigh fading channels, where the fairness maximization is achieved when the average user data rates are equal. For the fairness evaluation, hence approximate expressions for the average user data rates and the average sum date rate of the proposed scheme are provided by using high signal-to-noise ratio approximation. Through simulation investigation, the derived approximate expressions for the average data rates are verified, and it is shown that the proposed scheme is superior to the conventional power allocation schemes in terms of the fairness of the average user data rates.

• Environmental and Resource Economics Review
• /
• v.17 no.3
• /
• pp.167-199
• /
• 2008

There are many successful cases in power interconnection among European and South American countries. However, that is not the case in Northeast Asian countries. Even though there will be a considerable benefit in power interconnection in Northeast Asian countries, there will be some difficulties due to various interest relationship and constraints among countries in Northeast Asia. GTMax(Generation and Transmission Maximization) Program is a very useful tool to analyze competitive electricity market and power interconnection developed by Argonne National Laboratory under the Department of Energy in the USA. This study tried to verify applicability and usefulness by GTMax model to domestic electric power system and power transfer from Russia Far East by power interconnection. When the power by importing from Russia is 2,000MW(around 2% of domestic installed capacity in 2017), there is no impact on domestic electricity market because of small power transfer. The power by importing should be large enough for achieving greater cost reduction by power interconnection. Besides, it would be better to supply power to Kyung-In region directly in reducing overall cost when the power by importing from Russia are sold at low price. In the case of interconnecting Young-Dong region, if it is not possible to upgrade transmission line with power transfer capabilities between Young-Dong and Kyung-In region, then the power by importing from Russia can replace the power produced in Jung-Bu region and the relative benefit of importing power can be reduced.