• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.480-488
• /
• 2018

The development of information and communication technology has been carried out actively in the field of agriculture to generate valuable information from large amounts of data and apply big data technology to utilize it. Crops and their varieties are determined by the influence of the natural environment such as temperature, precipitation, and sunshine hours. This paper derives the climatic factors affecting the production of crops using the garlic growth process and daily meteorological variables. A prediction model was also developed for the production of garlic per unit area. A big data analysis technique considering the growth stage of garlic was used. In the exploratory data analysis process, various agricultural production data, such as the production volume, wholesale market load, and growth data were provided from the National Statistical Office, the Rural Development Administration, and Korea Rural Economic Institute. Various meteorological data, such as AWS, ASOS, and special status data, were collected and utilized from the Korea Meteorological Agency. The correlation analysis process was designed by comparing the prediction power of the models and fitness of models derived from the variable selection, candidate model derivation, model diagnosis, and scenario prediction. Numerous weather factor variables were selected as descriptive variables by factor analysis to reduce the dimensions. Using this method, it was possible to effectively control the multicollinearity and low degree of freedom that can occur in regression analysis and improve the fitness and predictive power of regression analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2968-2974
• /
• 2010

Nowadays, the PV systems have been focused on the grid connection between the power source and the grid. The PV inverter can be considered as the core of the whole system because of an important role in the grid-interfacing operation. An important issue in the inverter control is the load current regulation. In the literature, Proportional Integral (PI) controller, which is normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an AC system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. Compared with conventional PI controller, Proportional Resonant (PR) controller can introduce an infinite gain at the fundamental frequency of the AC source; hence it can achieve the zero steady-state error without requiring the complex transformation and the de-coupling technique. Theoretical analyses of both PI and PR controller are presented and verified by simulation and experiment. Both controller are implemented in a 32-bit fixed-point TMS320F2812 DSP processor and evaluated on a 3kW experimental prototype PV Power Conditioning System (PCS). Simulation and experimental results are shown to verify the controller performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.493-500
• /
• 2017

Based on the data accumulated through EMU fault management, this paper examines the reliability of old railway car parts and proposes measurements to improve safety. Subway Line 7 of the Seoul Metropolitan Rapid Transit Corporation, auxiliary power unit (Static Inverter) of the EMU second version is a core equipment to supply power to various room-service units in cars and make an effect directly on passenger satisfaction. To analyze the pattern of failure throughout the field data over a long period of time, this analysis of statistics and reliability considers the operating environment and stress factors. This statistical analysis presents the correlation between failure and the temperature stress factors related to frequent failure occurring intensively in summer. In addition, throughout the analysis of the life of the IGBT inverter, the effect of the temperature stress factor was observed before and after the repair. As a result of an analysis of the optimal operating conditions considering two variations of EMU, such as variable load and outside temperature, a difference in the cooling capacity between the optimal operating conditions and frequent failure conditions was observed. Based on this analysis, this paper suggests a way to minimize cooling capacity difference for the optimal operational conditions.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.1
• /
• pp.193-214
• /
• 1998

The purpose of the present study was to examine the causal model of nurses' organizational commitment. Based on literature review and Fishbein's behavioral intentions model ((Fishbein. 1967: Fishbein & Ajzen. 1975). the organizational commitment was conceptualized within a motivational framework that mediate between antecedents variables and outcome variables. Antecedent variables were pay, promotional chances. continuing education opportunity. rigidity of the administration. paticipative decision making, latitude, group support, role conflict, work load, need for achievement. experience and pride for professional nursing. Outcome variable was turnover intention. The subjects were 373 nurses who were working at 2 large general hospitals located in Seoul. It represents a response rate of 94%. Data for this study was collected from August 29 to September 22 in 1997 by Questionnaire. Path analysis with LISREL 7.16 prigram was used to test the fit of the proposed conceptual model to data and to examine the causal relationships among variables. The result showed that both the proposed model and the modified model fit the data excellently. It needs to be notified, however. that path analysis can not count measurment errors: measurement error can attenuate estimates of coefficient and explanatory power. Nontheless the model revealed considerable explanatory power for organizational commitment (58%), pride for professional nursing (50%) and turnover intention(40%). In predicting nurses' organizational commitment, the findings of this study clearly demonstrated 'the pride for professional nursing' might be the most important variables of all the antecedent variables. Group support, role conflict, need for achievement were also found to be important determinants for the organizational commitment and turnover intention, The result showed experience might be a predictor for 'pride for professional nursing' and 'turnover intention' but not 'organizational commitment', 'Rigidity of the administration' and latitude were also found to have important roles in predictingr the organizational commitment, while participative decision making might have an impact on turnover intention. On the other hand promotional chance had an influence on all the outcome variables, while pay only on turnover intention. In predicting turnover intention, the result clearly revealed 'the pride for professional nursing' and 'organizational commitment' might be the most powerful predictors among all the variables. Theses results were discussed, including directions for the future research and practical implications drawn from the research were suggested.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.1
• /
• pp.183-214
• /
• 1998

The purpose of the present study was to examine the causal model of nurses' organizational commitment. Based on literature review and Fishbein's behavioral intentions model ((Fishbein, 1967;Fishbein & Ajzen. 1975), the organizational commitment was conceptualized within a motivational framework that mediate between antecedents variables and outcome variables. Antecedent variables were pay, promotional chances, continuing education opportunity, rigidity of the administration, paticipative decision making, latitude, group support, role conflict, work load, need for achievement, experience and pride for professional nursing. Outcome variable was turnover intention. The subjects were 373 nurses who were working at 2 large general hospitals located in Seoul. It represents a response rate of 94%. Data for this study was collected from August 29 to September 22 in 1997 by Questionnaire. Path analysis with LISREL 7.16 prigram was used to test the fit of the proposed conceptual model to data and to examine the causal relationships among variables. The result showed that both the proposed model and the modified model fit the data excellently. It needs to be notified, however, that path analysis can not count measurement errors; measurement error can attenuate estimates of coefficient and explanatory power. Nontheless the model revealed considerable explanatory power for organizational commitment (58%). pride for professional nursing (50%) and turnover intention(40%). In predicting nurses' organizational commitment. the findings of this study clearly demonstrated 'the pride for professional nursing' might be the most important variables of all the antecedent variables. Group support. role conflict, need for achievement were also found to be important determinants for the organizational commitment and turnover intention. The result showed experience might be a predictor for 'pride for professional nursing' and 'turnover intention' but not 'organizational commitment'. 'Rigidity of the administration' and latitude were also found to have important roles in predictor for the organizational commitment, while participative decision making might have an impact on turnover intention. On the other hand promotional chance had an influence on all the outcome variables, while pay only on turnover intention. In predicting turnover intention, the result clearly revealed 'the pride for professional nursing' and 'organizational commitment' might be the most powerful predictors among all the variables. Theses results were discussed, including directions for the future research and practical implications drawn from the research were suggested.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.106-115
• /
• 2003

Diverse multimedia services will be deployed at hand on 3G-and-beyond multi-service CDMA systems in order to satisfy different quality of service (QoS) according to traffic types. In order to use appropriate resources efficiently the call admission control (CAC) as a major resource control mechanism needs to be used to take care of efficient utilization of limited resources. In this paper, we propose a QoS-aware CAC (QCAC) that is enabled to provide service fairness and service differentiation in accordance with priority order and that applies the different thresholds in received power considering different QoS requirements such as different bit error rates (BER) when adopting total received power as the ceil load estimation. The proposed QCAC calculates the different thresholds of the different traffic types based on different required BER applies it for admission policy, and can get service fairness and differentiation in terms of call dropping probability as a main performance metric. The QCAC is aware of the QoS requirement per traffic type and allows admission discrimination according to traffic types in order to minimize the probability of QoS violation. Also the CAC needs to consider the resource allocation schemes such as complete sharing (CS), complete partitioning (CP), and priority sharing(PS) in order to provide fairness and service differentiation among traffic types. Among them, PS is closely related with the proposed QCAC having differently calculated threshold per each traffic type according to traffic priority orders.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1045-1050
• /
• 2014

$N_2O$(Nitrous Oxide) is known as the third major GHG(Green House Gas) following $CO_2$(Carbon Oxide) and $CH_4$(Methane). The GWP(Global Warming Potential) factor of $N_2O$ is 310 times as large as that of $CO_2$ because $N_2O$ in the atmosphere is very stable, and it becomes a source of secondary contamination after photo-degradation in the stratosphere. Investigation on the cause of the $N_2O$ formation have been continuously reported by several researchers on power sources with continuous combustion form, such as a boiler. However, in the diesel engine, research on $N_2O$ generation which has effected from fuel components has not been conducted. Therefore, in this research, author has investigated about $N_2O$ emission rates which was changed by nitrogen and sulfur concentration in fuel on the diesel engine. The test engine was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of that was set up at a 75% load. Nitrogen and sulfur concentrations in fuel were raised by using six additives : nitrogen additives were Pyridine, Indole, Quinoline, Pyrrol and Propionitrile and sulfur additive was Di-tert-butyl-disulfide. In conclusion, diesel fuels containing nitrogen elements less than 0.5% did not affect $N_2O$ emissions in the all concentrations and kinds of the additive agent in the fuel. However, increasing of the sulfur additive in fuel increased $N_2O$ emission in exhaust gas.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.577-583
• /
• 2011

To meet the requirements of the Tier 4 interim regulations for off-road vehicles, emissions of particulate matter (PM) and nitrogen oxides (NOx) must be reduced by 95% and 30%, respectively, compared to current regulations. In this research, both the DPF and HPL EGR systems were investigated, with the aim of decreasing the PM and NOx emissions of a 56-kW off-road vehicle. The results of the experiments show that the DOC-DPF system is very useful for reducing PM emissions. It is also found that the back pressure is acceptable, and the rate of power loss is less than 5%. By applying the HPL EGR system to the diesel engine, the NOx emissions under low- and middle-load conditions are reduced effectively because of the high differential pressure between the turbocharger inlet and the intake manifold. The NOx emissions can be decreased by increasing the EGR rate, but total hydrocarbon (THC) emission increases because of the increased fuel consumption needed to compensate for the power loss caused by EGR and DPF.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.65-71
• /
• 2001

The nuclear power plant(NPP) should be shut down for inspection and tests prior to a return to power if the earthquake exceeds the operating basis earthquake(OBE). The OBE at the plant is considered to have been exceeded if the computed cumulative absolute velocity(CAV) from the earthquake record is greater than 0.16g-sec. However, the CAV criterion should be determined considering the seismic and structural characteristics of the plant. An experimental study using shaking table is conducted in this study to evaluate intensity of CAV criterion. Appropriate level of CAV is evaluated based on the test results using the developed seismic damage indicator(SDI) model. The model consists of stacked acrylic cylinders and is developed to behave consistently for each directional seismic load. The result of the experimental study in dicates that the CAV criterion of 0.16g-sec is conservative enough to be applied to Korean NPPs since the CAV value of the seismic input motion of the Korean standard NPPs ranges from 0.3 to 0.5 g-sec. The developed SDI is expected to be useful not only in easily determining OBE exceedance but also in evaluating earthquake damage quantitatively to provide guidelines for better post-shutdown inspection and test.