• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1729-1750
• /
• 2018

Voltage source inverters (VSIs) are widely used to drive induction motors in industry applications. The quality of output waveforms depends on the switching sequences used in pulse width modulation (PWM). In this work, all existing optimal space vector pulse width modulation (SVPWM) switching strategies are studied. The performance of existing SVPWM switching strategies is optimized to realize a tradeoff between quality of output waveforms and switching losses. This study generalizes the existing optimal switching sequences for total harmonic distortions (THDs) and switching losses for different modulation indexes and reference angles with a parameter called quality factor. This factor provides a common platform in which the THDs and switching losses of different SVPWM techniques can be compared. The optimal spatial distribution of each sequence is derived on the basis of the quality factor to minimize harmonic current distortions and switching losses in a sector; the result is the minimum ripple loss SVPWM (MRSLPWM). By employing the sequences from optimized switching maps, the proposed method can simultaneously reduce THDs and switching losses. Two hybrid SVPWM techniques are proposed to reduce line current distortions and switching losses in motor drives. The proposed hybrid SVPWM strategies are MRSLPWM 30 and MRSLPWM 90. With a low-cost PIC microcontroller (PIC18F452), the proposed hybrid SVPWM techniques and the quality of output waveforms are experimentally validated on a 2 kVA VSI based on a three-phase two-level insulated gate bipolar transistor.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1224-1234
• /
• 2019

Hybrid rotor position estimation methods that integrate a fundamental model and high frequency (HF) signal injection are widely used for the wide speed-range sensorless control of interior permanent-magnet synchronous machines (IPMSMs). However, the direct transition of two different schemes may lead to system fluctuations or system instability since two estimated rotor positions based on two different schemes are always unequal due to the effects of parameter variations, system delays and inverter nonlinearities. In order to avoid these problems, a seamless transition strategy to define and construct a virtual q-axis inductance is proposed in this paper. With the proposed seamless transition strategy, an estimated rotor position based on a fundamental model is forced to track that based on HF signal injection before the transition by adjusting the constructed virtual q-axis inductance. Meanwhile, considering that the virtual q-axis inductance changes with rotor position estimation errors, a new observer with a two-phase phase-locked loop (TP-PLL) is developed to accurately obtain the virtual q-axis inductance online. Furthermore, IPMSM sensorless control with maximum torque per ampere (MTPA) operations can be tracked automatically by selecting the proper virtual q-axis inductance. Finally, experimental results obtained from an IPMSM demonstrate the feasibility of the proposed seamless transition strategy.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.254-260
• /
• 2019

본 논문에서는 양방향 dc-to-dc 컨버터의 고장원인, 고장영향, 고장 결과를 파악하기 위한 failure mode and effect analysis(FMEA)와 양방향 컨버터의 위험도를 고려한 fault-tree analysis(FTA)를 통해 고장률을 예측한다. 전기차의 구동전압을 효율적으로 상승시키기 위해 인버터 앞단에 부착되는 양방향 컨버터는 배터리 전력을 dc-link 커패시터로 방전시키는 승압모드와 회생전력을 배터리로 충전시키는 강압모드를 가진다. 양방향 컨버터의 동작 특성을 고려한 FMEA 결과를 바탕으로 컨버터의 위험도를 고려한 고장나무를 설계한다. 전기차 MCU용에 맞는 설계 파라메타를 설정하고 출력전압 리플과 인덕터 전류 리플에 따른 커패시터와 인덕터의 부품 고장률을 분석한다. 또한 동작 온도에 따른 주요부품의 고장률을 MIL-HDBK-217F를 이용하여 구한다. 마지막으로 부품 고장률을 고장나무의 기본 사상의 고장률로 반영하여 컨버터 고장률과 평균고장시간을 예측한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.95-97
• /
• 2018

The power quality of Single Phase Grid-Connected Inverters (GCIs) has received much attention with the increasing number of Distributed Generation (DG) systems. However, the performance of single phase GCIs get degraded due to several factors such as the grid voltage harmonics, the dead time effect, and the turn ON/OFF of the switches, which causes the harmonics at the output of GCIs. Therefore, it is not easy to satisfy the harmonic standards such as IEEE 519 and P1547 without the help of harmonic compensator. To meet the harmonic standards a certain kind of harmonic controller needs to be added to the current control loop to effectively mitigate the low order harmonics. In this paper, the harmonic compensation is performed using a novel robust harmonic compensation method based on Digital Lock-in Amplifier (DLA). In the proposed technique, DLAs are used to extract the amplitude and phase information of the harmonics from the output current and compensate it by using a simple PI controller in the feedforward manner. In order to show the superior performance of the proposed harmonic compensation technique, it is compared with those of conventional harmonic compensation methods in terms of the effectiveness of harmonic elimination, complexity, and implementation. The validity of the proposed harmonic compensation techniques for the single phase GCIs is verified through the experimental results with a 5kW single phase GCI. Index Terms -Single Phase Grid Connected Inverter (SPGCI), Harmonic Compensation Method, Total Harmonic Distortion (THD) and Harmonic Standard.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.10-17
• /
• 2021

This paper presents the robust design of each component used in the development of an induction bolt heating system for dismantling the high-temperature high-pressure casing heating bolts of turbines in power plants. The induction bolt heating system comprises seven assemblies, namely AC breaker, AC filter, inverter, transformer, work coil, cable, and CT/PT. For each of these assemblies, the various failure modes are identified by the failure mode and effects analysis (FMEA) method, and the causes and effects of these failure modes are presented. In addition, the risk priority numbers are deduced for the individual parts. To ensure robust design, the insulated-gate bipolar transistor (IGBT), switched-mode power supply (SMPS), C/T (adjusting current), capacitor, and coupling are selected. The IGBT is changed to a field-effect transistor (FET) to enhance the voltage applied to the induction heating system, and a dual-safety device is added to the SMPS. For C/T (adjusting current), the turns ratio is adjusted to ensure an appropriate amount of induced current. The capacitor is replaced by a product with heat resistance and durability; further, coupling with a water-resistant structure is improved such that the connecting parts are not easily destroyed. The ground connection is chosen for management priority.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.41-47
• /
• 2022

Ag sintering technologies have received great attention as it was applied to the inverter of Tesla's electric vehicle Model III. Ag sinter bonding technology has advantages in heat dissipation design as well as high-temperature stability due to the intrinsic properties of the material, so it is useful for practical use of SiC and GaN devices. This study was carried out to understand the sinter joining temperature effect on the robust Ag sintered joints in air without pressure within 10 min. Electroplated Ag finished Cu dies (3 mm × 3 mm × 2 mm) and substrates (10 mm × 10 mm × 2 mm) were introduced, respectively, and nano Ag paste was applied as a bonding material. The sinter joining process was performed without pressure in air with the bonding temperature as a variable of 175 ℃, 200 ℃, 225 ℃, and 250 ℃. As results, the bonding temperature of 175 ℃ caused 13.21 MPa of die shear strength, and when the bonding temperature was raised to 200 ℃, the bonding strength increased by 157% to 33.99 MPa. When the bonding temperature was increased to 225 ℃, the bonding strength of 46.54 MPa increased by about 37% compared to that of 200 ℃, and even at a bonding temperature of 250 ℃, the bonding strength exceeded 50 MPa. The bonding strength of Ag sinter joints was directly influenced by changes in the necking thickness and interfacial connection ratio. In addition, developments in the morphologies of the joint interface and porous structure have a significant effect on displacement. This study is systematically discussed on the relationship between processing temperatures and bonding strength of Ag sinter joints.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.168-173
• /
• 2013

본 연구에서는 기존의 상업용 태양전지에서 전자-정공 재결합을 최소화하여 태양전지의 효율을 향상시키는 부가장치인 전자전달증대기(Electron Relay Enhancer: ERE)를 소개한다. 전자전달증대기는 교류 전력 공급 장치와 연결된 두 개의 캐패시터와 전자의 흐름 방향을 제어하는 브릿지 다이오드 시스템으로 구성되어 있다. 두 개의 캐패시터는 브릿지 다이오드 시스템을 통하여 태양전지로부터 전자를 포집하고 포집된 전자를 로드저항이나 인버터쪽으로 펌핑하는 것을 반복한다. 양으로 대전된 한 개의 캐패시터가 전자를 포집하는 동안 음으로 대전된 다른 캐패시터는 전자를 펌핑한다. 태양전지에서 여기된 전자가 정공에 재결합되기 전에 양으로 대전된 캐패시터는 태양전지로부터 더 많은 여기된 전자를 끌어온다. 이러한 까닭에 ERE 시스템은 태양전지의 효율을 증대시킨다. 연구결과로 ERE 활성 시 태양전지의 증가된 전력은 각각의 실험조건에서 5.9 W에서 25.6 W사이였고, 가장 높은 태양전지전력증가율은 ERE 비활성 시 태양전지 전력의 30.8%였다.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.70-79
• /
• 2003

본 연구에서는 압전 변압기를 이용한 T5 28급 전자식 안정기를 제작하여 그에 관한 특성을 조사하였다. 제작된 전자식 안정기는 크게 정류부와 능동형 역률 개선 회로부, 마이크로 컨트롤러를 이용한 주파수 발진부와 피드백 제어 회로부, 그리고 하프-브리지 인버터 회로 및 압전 변압기포 구성하였다. 사용된 원칩 마이크로 컨트롤러(AT90S4433)는 주파수를 발진하는 발진 회로부와 형광램프에 인가된 전류값을 측정하여 램프의 구동여부를 판단하는 피드백 제어 회로부로 구성하였으며, 내부 프로그램에 의해 일정 주파수에서 주파수를 감소시킴으로서 램프 방전을 유도하고 방전을 확인 후 정상상태 구동을 하는 주파수 대포의 이동을 통해 형광램프에 일정한 출력을 유지하였다. 결과적으로 개발된 전자식 안정기는 기존의 자기식 안정기가 무겁고 부피가 크며 많은 손실과 깜박거림(Flicker)현상을 지니는 반면에, 75[kHz]대의 고주파수로 동작하면서 99.5[%]이상의 높은 역률과 12[%]이하의 낮은 총 고조파 왜곡률(THD), 그리고 1.5이하의 CF(Crest Factor)를 나타낸다. 따라서 본 연구에서 제작된 압전형 안정기근 기존의 안정기를 대체할 수 있으며, 소형 경량화 되고 높은 효율을 지니게 되므로 경제적 측면에서의 장점도 기대된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.91-105
• /
• 2016

Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of ${\Phi}_{M1}/{\Phi}_{M2}$ have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권2호
• /
• pp.58-67
• /
• 1995

본 논문은 유도전동기의 운전조작시에 발생되는 자계변화특성에 대하여 기술하였다. 본 측정시스템은 자기적분형 자계센서, 증폭기, 능동형 적분기로 이루어졌으며, 교정실험에 대한 측정계의 주파수대역과 감도는 각각 20[Hz]~0.234[mV/$\mu$T]이다. 유도전동기의 기동과 정상운전중에 발생하는 자계성분을 측정하였으며, 고조파 성분을 고속 푸리에 변환기법으로 분석하였다. 유도전동기의 직입기동시에는 단일성 펄스자계가 강하게 발생하였으며, 이의 피크치는 정상상태의 값보다 5배이상 크게 나타났다. 이러한 긴 과도시간과 강한 자계의 세기는 전동기의 큰 인덕턴스와 동특성에 기인된다. 유도전동기의 정상운전시에는 유도전동기의 극수에 의존하는 기본파에 대한 분조파의 자계성분이 관측되었다. 또한, 자계의 분조파 성분은 전동기의 토크 변동으로 불균일한 회전토크로 인해 생기는 맥동전류와 전압플리커에 의해서 발생하는 것으로 생각된다. 인버터구동형 유도전동기에서는 직입기동에 비하여 많은 고조파 성분이 발생되고 있었으며, 특히 전동기의 구동주파수가 낮을수록 맥동토크에 의한 전류변화로 고조파 성분은 더욱 증가하였다.