• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• 한국분무공학회지
• /
• 제24권1호
• /
• pp.35-42
• /
• 2019

Syngas is widely produced by incomplete combustion of coal, water vapor, and air (oxygen) in a high-temperature/high-pressure gasifier through a coal-gasification process for power generation. In this study, a simulation syngas which was mainly composed of $H_2$, CO, $CO_2$, and $N_2$ was fueled with diesel. A modified single cylinder compression ignition (CI) engine is equipped with intake port syngas supply system and mechanical diesel direct injection system for dual fuel combustion. Combustion and emission characteristics of the engine were investigated by applying various syngas composition ratios and compression ratios. Diesel fuel injection timing was optimized to increase indicated thermal efficiency (ITE) at the engine speed 1,800 rpm and part load net indicated mean effective pressure ($IMEP_{net}$) 2 to 5 bar. ITE of the engine increased with the $H_2$ concentration, compression ratio and engine load. With 45% of $H_2$ concentration, compression ratio 17.1 and $IMEP_{net}$ 5 bar, ITE of 41.5% was achieved, which is equivalent to that of only diesel fuel operation.

• 에너지공학
• /
• 제25권1호
• /
• pp.9-14
• /
• 2016

본 연구는 주위의 온도보다 약 $20{\sim}30^{\circ}C$ 밖에 높지 않은 저온폐열을 활용하기 위한 TM(Thermal to Mechanical) 발전변환기의 개발을 위하여 저온도차 스털링엔진의 하나인 MM-7에 대한 성능실측 연구를 수행하였다. 스털링엔진의 흡열부와 방열부의 온도차에 대한 토크 및 분당회전수를 측정하고 이를 바탕으로 MM-7 엔진의 출력을 산출하였으며, 이를 통하여 효율적인 TM발전변환기의 개발 방안을 모색하였다.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.60-67
• /
• 2008

본 연구는 운용중인 항공기의 가스터빈엔진을 유전 알고리즘을 이용한 실시간 결함진단을 통해 엔진 운용의 안정성과 신뢰성을 확보하는 것이 목적이다. 대상엔진인 터보샤프트엔진의 구성품 중 성능 저하는 압축기, 가스발생기 터빈, 동력 터빈 중 한 구성품에서만 발생한다고 가정하였다. 설계점에 비해 탈 설계영역에서의 학습 데이터는 약 200배 이상으로 증가하였으며, 따라서 요구 수렴도를 만족시키기 위한 방대한 학습시간이 요구된다. 진단오차를 만족시키고 학습시간을 단축시키기 위해 최적분할을 사용하였고 그 결과, 오차범위 5% 이내로 진단됨을 확인하였다.

• 오토저널
• /
• 제15권1호
• /
• pp.55-66
• /
• 1993

The characteristics of the flow processes in the cylinder of the two-stroke cycle engines have become the subject of increasing and attention owing to the simplicity and the higher power per unit weight of the two-stroke cycle engine. Among the many factors which influence on the scavenging flow, the port angle is important factor. Hence, four different type models with one inlet-port and two side-ports are studied to show the effect of port angle on the laminar scavenging flow. When the inlet-port axial is relatively larger than the side-port axial angle, it is showed that the fresh charge penetrate into the burned gas and displace it first toward the cylinder head and then toward the exhaust port. When the inlet-port axial angle is much less than the side-port axial angle, the fresh charge through the inlet-port directly move toward the exhaust port. The result showed that the model A may suppress the generation of vortices in the vicinity of inlet and side prots which restrict the sufficient supply of fresh charge and obstruct the perfect displacement of all combustion products.

• 한국기후변화학회지
• /
• 제8권3호
• /
• pp.265-273
• /
• 2017

Recently the Paris Climate Change Accord has been officially put into effect, making global efforts to implement Greenhouse Gas (GHG) reductions, and also International environmental regulations in the automotive sector will be further strengthened. The electric vehicle, which minimizes the particulate matter generated by existing internal combustion engine automobiles, is evaluated as a representative eco-friendly automobile. However, charging the battery of an electric vehicle is not fully environment-friendly if it is fueled by electricity that is being generated by fossil fuels as an energy source. The energy generated by the photovoltaic power generation system, which is an infinite clean energy, can be used to charge an electric vehicle's battery. Currently, shortage of charging facilities, time of charging, and high battery prices are the problem of activating the supply of electric vehicles. This study is to build a conjunction between the EVBSS (Electric Vehicle Battery Supply System) and ESS (Energy Storage System), which can quickly supply the photovoltaic charged battery to the required demand. If the charged battery in the Battery Swapping Station (BSS) is swapped swiftly, it will dramatically shorten the waiting time for charging the battery. As a result, if the battery is rented when it is needed, electric vehicles can be sold without the cost of a battery, which accounts for a large portion of the total cost, then the supply of electric vehicles are expected to expand. Furthermore, it will be an important alternative to maneuver climate change by minimizing GHG emissions from internal combustion engine vehicles.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.113.1-113.1
• /
• 2010

IGCC(Integrated Coal Gasification and Combined Cycle) plants can be among the most advanced and environmental systems for electric energy generation from various feed stocks and is becoming more and more popular in new power generation fields. In this work, the performance of IGCC plants employing Shell gasification technology and a GE 7FB gas turbine engine was simulated using IPSEpro open-equation modeling environment for different operating conditions. Performance analyses and comparisons of all operating cases were performed based on the design cases. Discussions were focused on gas composition, syngas production rate and overall performance. The validation of key steady-state performance values calculated from the process models were compared with values from the provided heat and material balances for Shell coal gasification technology. The key values included in the validation included the inlet coal flow rate; the mass flow rate, heating value, and composition of major gas species (CO, H2, CH4, H2O, CO2, H2S, N2, Ar) for the syngas exiting the gasifier island; and the HP and MP steam flows exiting the gasifier island.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.613-619
• /
• 2017

본 논문에서는 PMS(Power Management System) HILS(Hardware In the Loop Simulaition) 가상 제어기 환경 구축을 위하여 디젤과 LNG를 연료로 사용가능한 DF(Dual Fuel) Generator를 MATLAB/SIMULINK 기반으로 모델링을 수행하고 시뮬레이션 결과 모니터링이 가능한 인터페이스를 구현하였다. DF Generator의 주요 구성은 기계적 동력을 공급하는 DF 엔진과 기계적 동력을 받아 전력을 생산 및 공급을 하는 동기발전기가 있다. DF 엔진의 서브모델은 throttle body, intake manifold, torque generation 그리고 mass of LNG and diesel quantity 가 있다. 또한, 단일 용량을 초과하는 전체 부하를 공유하기 위하여 병렬 연결된 DF Generator 와 governor 모델을 이용하여 부하 분담 시스템을 구현하였다. 시뮬레이션 결과와 가상 부하에 따른 예상 결과의 비교를 통해 DF Generator 모델의 신뢰성을 검증하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.354-358
• /
• 2009

소형 가스터빈 엔진은 무인 항공기 및 소규모 비상 발전 시스템의 동력 기관으로서 각광받고 있으며, 중대형 가스터빈 엔진의 기초연구 및 가스터빈 교육용으로도 큰 의미를 가지고 있다. 현재 다수의 국내외 업체에서는 소형 가스터빈의 교육용 실험 장치를 제조 및 판매하고 있으나, 모두 운전 영역에서의 데이터 수집만이 가능하고 상용 ECU가 엔진을 제어하고 있기 때문에 소형 가스터빈의 열유체 역학적인 현상을 관측하는 것만이 가능하기 때문에 특정 목적에 따른 실험 변수의 제어를 통한 심화된 연구가 불가능하다. 따라서 본 연구에서는 사용자의 활용도가 높은 LabVIEW 소프트웨어 및 하드웨어의 신호 수집, 제어 및 분석 체계를 이용하여 소형 가스터빈의 실험 변수 제어 및 데이터 수집, 분석이 하나의 통합된 시스템 내에서 수행될 수 있는 Intefrated Modifiable Test Rig의 설계 및 제작이 수행되었다.

• 한국전자통신학회논문지
• /
• 제10권2호
• /
• pp.247-252
• /
• 2015

전력계통이 연계되지 않는 국내 유인도서의 대부분의 전력은 디젤발전기를 통해 공급하고 있으나 도서지역의 경우 유류비가 내륙지역에 비해 비싸고 이를 운송하는 것이 어렵다. 이러한 이유로 최근 자연자원을 활용하여 신재생에너지원을 도입을 하고 있지만 자연환경에 의존하는 신재생에너지원은 안정적인 전력공급이 어렵기 때문에 기존 디젤발전과 신재생에너지가 포함된 하이브리드시스템을 통해 전력을 공급하는 것이 필요하다. 본 논문은 풍력, 태양광, 배터리 및 디젤엔진 등 에너지저장장치를 포함한 하이브리드시스템의 타당성 연구결과를 설명한다. 이 연구 대상은 전력계통에 연계되지 않은 전라남도 서거차도이며, 최소비용을 투자하여 탄소배출을 최소화하는 최적 용량의 하이브리드시스템 구성을 제안한다. 이 시스템에 대한 경제정인 적합성은 HOMER 프로그램을 사용하여 분석하였다.