• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.105-110
• /
• 2019

This study proposed a reactive power variation (RPV) method equipped with positive feedback (PF) for detecting the islanding operation of distributed generation systems. The proposed RPV consists of the constant reactive power component and a certain reactive power term and uses the frequency deviation between the rated and the measured frequencies. The constant reactive power is injected from distributed generation system and power factor is to 0.9975 in grid-connected operation. PF is activated from generation of the frequency deviation and the injected reactive power is continuously increased due to PF when islanding occurs. Consequently, the increasing reactive power causes the point of common coupling frequency to deviate from the maximum/minimum threshold level. Performance of the proposed RPV is verified in a 1.7 kW T-type inverter, and the detection times are 53 and 150 ms.

• 한국광학회지
• /
• 제8권6호
• /
• pp.476-481
• /
• 1997

0.98$\mu\textrm{m}$ 파장으로 펌핑되는 광대역폭 erbium 첨가 광섬유 광원에서 중심파장의 변화를 최소화할 수 있는 최적 동작 조건을 실험적으로 도출하였다. 중심파장의 안정을 위한 최적 조건은 광원이 isolation된 경우와 광원에 귀환광이 존재하는 경우에 각기 다르게 나타났다. 귀환광이 있는 경우에은 isolation된 경우에 비해 적정 펌프 power가 낮은 power영역에서 존재하였으며 더욱 넓은 펌프 power 범위에 걸쳐 중심파장의 변화가 거의 없는 것으로 나타났다. 다만 isolation된 경우에 비해 광출력이 감소하였으며 중심파장의 변화가 귀환수준의 변화에 대해 민감하였다. 따라서 귀환수준만 일정하게 유지된다면 귀환광이 존재하는 경우에 중심파장 안정성면에서 더 나은 특성을 얻을 수 있으며, 광원에 일정한 수준의 dc 귀환광을 넣어줌으로써 중심파장 안정성을 강화시킬 수 있다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.65-72
• /
• 2004

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The input active power factor correction (APFC) circuits can be implemented in either the two-stage approach or the single-stage approach. The two-stage approach can be classified into boost type PFC circuit and dc/dc converter. The power factor correction circuit with a boost converter used as an input power source is studied in this paper. In a boost power factor correction circuit there are two feedback control loops, which are a current feedback loop and a voltage feedback loop. In this paper, the regulation performance of output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of designed boost PFC circuit is confirmed by MATLAB simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.105-106
• /
• 2012

A feedback control algorithm for the input voltage control of boost converter is proposed in this paper. The proposed control system is mathematically formulated such that the state feedback gains. The control algorithm does not rely on manual tuning procedures neither use complex adaptive techniques. For the verification of the proposed control algorithm, simulation results of the proposed algorithm using PSIM 9.0 are given.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.326-333
• /
• 2015

This paper reports an adaptive positive feedback bias control technique for operational transconductance amplifiers to adjust the bias current based on the output current monitored by a current replica circuit. This technique enables operational transconductance amplifiers to quickly adapt their power consumption to various analog workloads when they are configured with negative feedback. To prove the concept, a test voltage follower is fabricated in $0.5-{\mu}m$ CMOS technology. Measurement result shows that the power consumption of the test voltage follower is approximately linearly proportional to the load capacitance, the signal frequency, and the signal amplitude for sinusoidal inputs as well as square pulses.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2048-2054
• /
• 2022

The coolant temperature feedback coefficient is an important parameter of reactor core power control system. To study the coolant temperature feedback coefficient influence on the core power control system of small PWR, the core power control system is built with the nonlinear model and fuzzy control theory. Then, the uncertainty quantification method of reactor core parameters is established based on the Latin hypercube sampling method and the Bootstrap method. Finally, under the conditions of reactivity step perturbation and coolant inlet temperature step perturbation, uncertainty analysis for two cases is carried out. The result shows that with fuzzy controller and fuzzy PID controller, the uncertainty of the coolant temperature feedback coefficient affects the core power control system, and the maximum uncertainties of core relative power, coolant temperature deviation, fuel temperature deviation and total reactivity are acceptable.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• 한국통신학회논문지
• /
• 제33권3A호
• /
• pp.327-334
• /
• 2008

동일 채널 중계기에서는 송 수신 신호간의 간섭으로 인해 중계기의 출력이 제한되는 문제점이 있다. 이러한 문제를 해결하기 위해 중계기에서 수신 신호를 복조하여 궤환채널을 추정하고 궤환신호를 제거하는 방법이 제시되었으나, T-DMB 시스템과 같이 파일럿 간격이 넓은 시스템에 복조형 궤환신호 제거방법을 적용할 경우 궤환채널 추정 속도가 느리다는 단점이 있다. 이를 극복하기 위해 본 논문에서는 시간영역의 파일럿을 여러 개의 서브 그룹으로 분할하여 궤환채널을 추정함으로써 적응 필터의 갱신 횟수를 증가시킬 수 있는 방법을 제안한다. 제안된 방법은 궤환채널 추정 속도를 개선하여 궁극적으로 궤환신호 제거 성능을 향상시킨다. 모의실험을 통해 제안된 방법이 기존 방법에 비해 궤환채널 추정 속도와 잔류 궤환신호 전력 (RFP) 측면에서 우수함을 보인다.

• 한국기후변화학회지
• /
• 제9권3호
• /
• pp.253-261
• /
• 2018

As user-involved energy saving activities have become important in recent years, many forms of energy feedback experiments have been conducted. We conducted a study to determine if energy feedback activities affect energy saving for students living in dormitories at a university in Seoul. In particular, smart plugs were used for efficient research and quantitative performance measurements, and the extent of the impact of competition and rewards on participant energy saving behavior was further analyzed. The main findings of this study are as follows. First, the power usage of groups using smart plugs was lower than that of those without them. Second, energy feedback delivered to smart plug users did not have a significant impact on reduction of electric power consumption. Third, competition and compensation strategies had additional effects in reducing power usage for smart plug users. As a result, methods to deliver energy feedback more effectively as ICT technologies develop and efficient energy activities using IoT technologies can be expected to spread widely in the future.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.472-476
• /
• 2020

We have investigated the impact of optical filter bandwidth on the performance of all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifiers (EDFAs). In principle, an optical bandpass filter (OBPF) should be placed within the feedback gain-clamping loop to set the lasing wavelength as well as the passband of the feedback amplified spontaneous emission (ASE) in all-optical AGC EDFA. From our measurement results, we found that the power level of feedback ASE with 0.1 nm passband of the optical filter was smaller than the ones with >0.2 nm passband cases. Therefore, the peak-to-peak power variation of the surviving channel with 0.1 nm passband was much larger than the ones with >0.2 nm passband. In addition, no significant difference in the power level of the feedback ASE was observed when the passband of the optical filter was ranging from 0.2 nm to 4.5 nm in our measurements. From these results, we have concluded that the passband of the optical filter should be slightly larger than 0.2 nm by taking into account the effect of feedback ASE power and the efficient use of the EDFA gain spectrum for the lasing ASE peak.