• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.579-585
• /
• 2002

The investigation into the effect of various feedback errors on system performance can help the robust feedback channel design and transmission of exact feedback channel information as well. In this paper, we address the algorithm that determines space combining weight vector maximizing received signal power at mobile on frequency flat fading channel and investigate the performance degradation by feedback channel delay in the FDD/CDMA systems employing transmit beamforming. We observe the effect of feedback channel delay corresponding to the number of transmit antennas and the temporal/spatial correlation of channel. The results show that performance is more sensitive to feedback delay with the larger number of antennas when fadings at transmit antennas are not spatially correlated.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.19-26
• /
• 2009

It is becoming more and more important to develop safety-critical systems with special attention. Examples of the safety-critical systems include the mass transportation systems such as high speed trains, airplanes, ships and so forth. Safety critical issues can also exist in the development of atomic power plants that are attracting a great deal of attention recently as oil prices are sky-rocketing. Note that the safety-critical systems are in general large-scale and very complex for which case the effects of adopting the systems engineering (SE) approach has been quite phenomenal. Furthermore, safety-critical requirements should necessarily be realized in the design phase and be effectively maintained thereafter. In light of these comments, we have considered our approach to developing safety-critical systems to be based on the method combining the systems engineering and safety management processes. To do so, we have developed a design environment by constructing a whole life cycle model in two steps. In the first step, the integrated process model was developed by integrating the SE (ISO/IEC 15283) and systems safety (e.g., hazard analysis) activities and implemented in a computer-aided SE tool environment. The model was represented by three hierarchical levels: the life-cycle level, the process level, and the activity level. As a result, one can see from the model when and how the required SE and safety processes have to be carried out concurrently and iterately. Finally, the design environment was verified by the computer simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.151-157
• /
• 2013

This paper proposes an online adaptive fuzzy controller for a wind energy conversion system (WECS) that is intrinsically highly nonlinear plant. In real application, to obtain exact system parameters such as power coefficient, many measuring instruments and off-line implementations are required, which is very difficult to perform. This shortcoming can be avoided by introducing fuzzy system in the controller design in this paper. The proposed adaptive fuzzy control scheme using self-structuring algorithm requires no system parameters to meet control objectives. Even the structure of the fuzzy system is automatically grows on-line, which distinguishes our proposed algorithm over the previously proposed fuzzy control schemes. Combining derivative estimator for wind velocity, the whole closed-loop system is shown to be stable in the sense of Lyapunov.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.505-514
• /
• 2015

This paper proposes a probabilistic generation assessment model of renewable energy generators(REGs) considering uncertainty of resources, mainly focused on Wind Turbine Generator(WTG) and Solar Cell Generator(SCG) which are dispersed widely in South Korea The proposed numerical analysis method assesses the one day-ahead generation by combining equivalent generation characteristics function and probabilistic distribution function of wind speed(WS) and solar radiation(SR) resources. The equivalent generation functions(EGFs) of the wind and solar farms are established by grouping a lot of the farms appropriately centered on Weather Measurement Station(WMS). First, the EGFs are assessed by using regression analysis method based on typical least square method from the recorded actual generation data and historical resources(WS and SR). Second, the generation of the REGs is assessed by adding the one day-ahead resources forecast, announced by WMS, to the EGFs which are formulated as third order degree polynomials using the regression analysis. Third, a Renewable Energy Generation Assessment System(REGAS) including D/B of recorded actual generation data and historical resources is developed using the model and algorithm predicting one day-ahead power output of renewable energy generators.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1181-1185
• /
• 2005

A combining of MIMO signal processing with OFDM is regarded as a promising solution of enhancing the performance of next generation wireless system. Therefore, in this paper, an OFDM-based wireless system employing layered space-time architecture is considered for a high-rate transmission. In the MIMO-OFDM system, we evaluate the PAR performance using the SLM approaches. The investigated SLM scheme for MIMO-OFDM signals selects the transmitted sequence with lowest average PAR over all transmitting antennas and retrieves the side information very accurately at the expense of a slight degradation of the PAR performance. The low probability of false side information can improve the overall detection performance of the MIMO-OFDM system with erroneous side information compared to the ordinary SLM approache, respectively. Also, we provide closed form of the average BER performance in MIMO-OFDM system using analytic approach.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.105-111
• /
• 2003

Wheel for passenger car support the car weight with tires, and they transmit rolling and braking power into the ground. Whittling away at wheel weight is more effective to boost fuel economy than lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model, and ANSYS package is selected for analyzing the design model. It has difficulties to interface these commercial software directly. For Combining both programs, response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim, and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel whee. PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm, which used the second-order information in the direction finding problem and uses the active set strategy, is used for solving optimization problems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.74-79
• /
• 2008

In an H.264/AVC video encoder, the motion estimation at fractional pixel accuracy improves a coding efficiency and image quality. However, it requires additional computation overheads for fractional search and interpolation, and thus, reducing the computation complexity of fractional search becomes more important. This paper proposes fast fractional search algorithms by combining the SASR(Simplified Adaptive Search Range) and the MSDSP(Mixed Small Diamond Search Pattern) with the predicted fractional motion vector. Compared with the full search and the prediction-based directional fractional pixel search, the proposed algorithms can reduce up to 93.2% and 81% of fractional search points, respectively with the maximum PSNR lost less than 0.04dB. Therefore, the proposed fast search algorithms are quite suitable for mobile applications requiring low power and complexity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.72-79
• /
• 2017

In this paper, we present a new saliency detection algorithm using the mutual information of wavelet subbands. Our method constructs an intermediate saliency map using the power operation and Gaussian blurring for high-frequency wavelet coefficients. After combining three intermediate saliency maps according to the direction of wavelet subband, we find the main directional components using entropy measure. The amount of mutual information of each subband is obtained centering on the subband having the minimum entropy The final saliency map is detected using Minkowski sum based on weights calculated by the mutual information. As a result of the experiment on CAT2000 and ECSSD databases, our method showed good detection results in terms of ROC and AUC with few computation times compared with the conventional methods.

• Industry Promotion Research
• /
• v.2 no.2
• /
• pp.45-52
• /
• 2017

this study, the problem of the quality is analyzed by questionnaire analysis of the current quality managers, and the German meister system, the Japanese name deduction system, the functional manager, and the quality manager system. First, we set up a quality guide selection classification guide model. Secondly, we set up a model for combining experience and expertise with theory. Third, we set up a quality brand application model to enhance competitiveness of SMEs. Fourth, The basic model is presented. The expected effects of these models are that, in the knowledge-based economy, in terms of identifying, fostering, and utilizing superior talents, quality experts combine academic theories and experience in each field to provide core expertise and knowledge, As a transformative leader and expert, we will become a leader of innovation activities by enhancing corporate competitiveness, developing younger leaders, and cooperating with suppliers. In order to strengthen competitiveness of SMEs, It will be possible to scale and cultivate the technology of SMEs.

• Journal of Fashion Business
• /
• v.15 no.6
• /
• pp.163-175
• /
• 2011

This study tried to improve the design of the symbol mark for the fashion industry and effectively publicize the brand image of a small fashion accessory company through a powerful visual communication strategy. For this purpose, this study performed research and an analysis of the features of existing fashion accessory companies as well as the current status and features of their utilization of symbol marks for the enhancement of the brand's image. Total 48 fashion accessory brands focued on jewerly were selected from the Dictionary of Fashion Brand and the types of symbol analyzed the concepts and formative aesthetics of the symbol mark design in each brand. Based on the data, this study designed the fashion accessory company's logo and a new symbol mark design. It makes full use of the characteristics of the logos and the symbol mark that reflect the most critical issues of fashion accessory design so as to promote the consumers' level of product recognition as well as the product symbol characteristics. In the case of combining characters with concrete objects, they were found generally to use objects that give elegance, cute and feminine images, such as rings, hearts and small pets. Moreover, colors in the series of black/grey seemed to be used to convey the concept of accessory brands that pursue modern, sophisticate, and practical images. As these design plans, enhancement of the consumers' level of recognition of the brand is attempted as well as the execution of an effective publicity of the feature of the product through the use of the logo and symbol marks reflecting the features of the fashion accessory, instead of simply introducing the brand or product. The result of this study indicates that methods to design brand symbol marks for clothing should be incessantly sought in a way to build brand power as an important component to represent concepts and reinforce brand image.