• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.4
• /
• pp.543-558
• /
• 2023

Currently, Japan is undertaking a nationwide project to measure and map radioactive contamination around Fukushima, as part of the efforts to restore normalcy following the nuclear accident. The Japan Atomic Energy Agency (JAEA) manages the Fukushima Environmental Safety Center, located approximately 20 km north of the Fukushima Daiichi nuclear power plant in Minamisōma City, Fukushima Prefecture. In collaboration with the JAEA, this study involved conducting comparison experiments and analyses with radiation detectors in high radiation environments, a challenging task in Korean environments. Environmental radiation surveys were conducted using three types of detectors: CZT, NaI(Tl), and LaBr₃(Ce), across two contaminated areas. Dose rate values were converted using dose rate conversion factors for each detector type, and dose rate maps were subsequently created and compared. The detectors yielded similar results, demonstrating their feasibility and reliability in high radiation environments. The findings of this study are expected to be a crucial reference for enhancing the verification and supplementation of procedures and methods in future radiation measurements and mobile surveys in high-radiation environments, using these three types of radiation instruments.

• Journal of muscle and joint health
• /
• v.30 no.3
• /
• pp.189-196
• /
• 2023

Purpose: This study sought to identify factors affecting the health-related quality of life (HINT-8) of female seniors aged 65 years or older living alone after the COVID-19 pandemic. Methods: Raw data from the eighth third year (2021) National Health and Nutrition Examination Survey was used, and the total number of subjects was 379. Data analysis was performed using SPSS 22.0 program, employing complex sample frequency and percentages, t-tests, analyses of variance, and regression analyses, while a post-hoc test (Bonferroni correction) was performed to determine differences in health-related quality of life. Results: The results of the study showed that the study subjects' health-related quality of life differed significantly depending on activity restrictions, number of walking days, age at menopause, perceived stress, depression, generalized anxiety disorder, and subjective health. Most of the influencing factors were emotional factors such as perceived stress level, generalized anxiety disorder, and subjective health status carrying an explanatory power of 46%. Conclusion: The results of this study can be used as basic data to establish intervention strategies based on factors that affect the health-related quality of life for female seniors living alone.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2008

Purpose: The isolated exercise therapy and its effect for the treatment of posterior tibial tendon dysfunction (PTTD) is not well known. The purpose of this study was to identify the clinical effect of stretching and strengthening exercise program on the patients' muscle function and range of motion, pain and gait in the management of the early stage PTTD. Materials and Methods: From October 2006 to March 2007, 14 patients with early stage PTTD (stage I or IIa) without surgical intervention were randomly assigned into two groups and we analyzed their clinical results. All patients were female and one who have sprained the same ankle during the program and one who withdrew from the program due to her private reason were excluded. At the last, the exercise group (EG) was seven and the control group (CG) was five. Mann-Whitney U test was used for the comparison of pain, ROM, muscle power, AOFAS score and 5 minute walking test of both groups. Wilcoxon-signed rank test was used for the comparison between the pre and post exercise program in EG. Results: The pain was significantly reduced in EG compare to CG and only the dorsiflexion was significantly increased in EG in the analysis of ROM. The dorsi flexion and plantar flexion power were significantly increased in EG. Conclusion: Our 6 weeks stretching and strengthening exercise program showed noticeably improved clinical result, and therefore it is recommended as one of the useful treatment option in the management of early stage PTTD.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.948-956
• /
• 2010

The purpose of this study was to test the effectiveness of a prototype KAFO (Knee-Ankle-Foot Orthosis) powered by two artificial pneumatic muscles during walking. We had previously built powered AFO (Ankle-Foot Orthosis) and KO (Knee Orthosis) and used it effectively in studies on assistance of plantaflexion and knee extension motion. Extending the previous study to a KAFO presented additional challenges related to the assistance of gait motion for rehabilitation training. Five healthy males were performed gait motion on treadmill wearing KAFO equipped with artificial pneumatic muscles to power ankle plantaflexion and knee extension. Subjects walked on treadmill at 1.5 km/h under four conditions without extensive practice: 1) without wearing KAFO, 2) wearing KAFO with artificial muscles turned off, 3) wearing KAFO powered only in plantaflexion under feedforward control, and 4) wearing KAFO powered both in plantaflexion and knee extension under feedforward control. We collected surface electromyography, foot pressure and kinematics of ankle and knee joint. The experimental result showed that a muscular strength of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be lower due to pneumatic assistance and foot pressure of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be greater due to power assistance. In the result of motion analysis, the ankle angle of powered KAFO in terminal stance phase was found a peak value toward plantaflexion and there were difference of maximum knee flexion range among condition 2, 3 and 4 in mid-swing phase. The current orthosis design provided plantaflexion torque of ankle jonit in terminal stance phase and knee extension torque of knee joint in mid-swing phase.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1021-1028
• /
• 2011

The objective of this paper is to optimize the design parameters of a novel mechanism for a robotic knee orthosis. The feature of the proposed knee othosis is to drive a knee joint with independent actuation during swing and stance phases, which can allow an actuator with fast rotation to control swing motions and an actuator with high torque to control stance motions, respectively. The quadriceps device operates in five-bar links with 2-DOF motions during swing phase and is changed to six-bar links during stance phase by the contact motion to the patella device. The hamstring device operates in a slider-crank mechanism for entire gait cycle. The suggested kinematic model will allow a robotic knee orthosis to use compact and light actuators with full support during walking. However, the proposed orthosis must use additional linkages than a simple four-bar mechanism. To maximize the benefit of reducing the actuators power by using the developed kinematic design, it is necessary to minimize total weight of the device, while keeping necessary actuator performances of torques and angular velocities for support. In this paper, we use a SGA (Simple Genetic Algorithm) to minimize sum of total link lengths and motor power by reducing the weight of the novel knee orthosis. To find feasible parameters, kinematic constraints of the hamstring and quadriceps mechanisms have been applied to the algorithm. The proposed optimization scheme could reduce sum of total link lengths to half of the initial value. The proposed optimization scheme can be applied to reduce total weight of general multi-linkages while keeping necessary actuator specifications.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.349-357
• /
• 2014

The purpose of this study was to examine the differences in the performance of dancing motions depending on the level of skill by investigating pulmonary functions, ground reaction force, and jerk cost. The subjects of this study were 12 professional dancers (career: 16 yrs) and 12 amateur dancers (career: 9 yrs) who had similar physical conditions. We selected four motion phases which included the diagonal line motion, the deep flexion motion, the breath motion, and the turn motion with one leg after a small step walking motion, with Goodguri Jangdan. In the experiment, 6 infrared cameras were installed in order to analyze the value of the jerk costs and the force plate form. Finally, we measured the pulmonary functions of the subjects. For data analysis, independent t-tests according to each event, were carried out in the data processing. According to the results of FVC % Predicted, the professional dancers showed greater lung capacities than the amateur dancers, indicating that the level of dancing skill influences lung capacity. Based on the result of the balance test, the professional dancers used more vertical power than did the amateur dancers when performing maximal flexion motion. The professional dancers used a propulsive force of pushing their body forward by keeping the center of body higher while the amateur dancers used a braking power by keeping their bodies backward. When performing medial-lateral movements, the amateur dancers were less stable than the professional dancers. There were no differences in values of jerk costs between the amateur dancers and the professional dancers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.304-304
• /
• 2006

One method of Electric Power Generation is to use piezoelectric materials, which form transducers that are able to interchange electrical energy and mechanical force or strain. This study describes the fabrication and properties of piezoelectric transducers for Power Generation application. The structure of the transducers was ceramic-metal-ceramic 3-layered parallel type The center metal layer of phosphorous bronze was bonded by two piezoelectric layers of which have sputtered Ag/Cu(or Ni/Cu) electrode layers on both sides.. The Energy generated by the vibration of piezoelectric transducers Can be achieved by adjusting a suitable piezoelectric constant and mechanical structures. The piezoelectric material used in this application showed the electrical properties of r=4400, $d_{33}\;=\;750\;(10^{-12}\;m/V)$, $d_{31}\;=\;-300\;(10^{-12}\;m/V)$, $k_{33}\;=\;71%$, $Qm\;=\;85$, $T_c\;=\;210^{\circ}C$.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.251-265
• /
• 2020

The Drone shot is moving images captured by a remotely controlled unmanned aerial vehicle, takes usually bird's eye view. The hand-held shot is moving images recorded by literal handheld shooting which is specialized to on-the-spot filming. It takes a walker's viewpoint through vivid realism of its self-reflexive camera movements. The purpose of this study is to analyze comparatively aesthetic functions of the drone shot and the hand-held shot. For this, the study understood Certeau's concepts of 'place' and 'space,' chose World Travel 'Peninsula de Yucatan' episode as a research object, and analytically applied two concepts to the scenes clearly presenting two shots' aesthetic characteristics. As a result, the drone shot took the authoritative viewpoint providing the general information and atmosphere as it overlooked the city with silent movements removing the self-reflexivity. This aesthetic function was reinforced the narration and subtitles mediating prior-knowledge about proper rules and orders of the place. The drone shot tended to project the location as a place. Conversely, the hand-held shot practically experienced the space with free walking which is free from rules and orders inherent in the city. The aesthetics of hand-held images represented the tactic resisting against the strategy of a subject of will and power in that the hand-held shot practiced anthropological walking by means of noticing everyday lives of the small town and countryside than main tourist attraction. In opposition to the drone shot, the hand-held shot tended to reflect the location as a space.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.51-63
• /
• 2023

This study aimed to verify the effects of a 4-week program of ankle-strengthening exercise and toe-taping walk exercise on the basic lower body strength and walking to examine the benefits of the two exercises. The subjects involved 30 women in their 20s enrolled in university A. The subjects were equally divided into three groups - ankle-strengthening exercise group, toe-taping walk exercise group, and control group. The subjects were instructed to massage and do ankle-strengthening exercises using a towel, massage ball, and CRT, for 60 minutes, 3 times a week. They also taped their hallux valgus using a kinesiology tape and walked for 20 minutes with white tape applied. To sum up, the 4-week ankle-strengthening exercise and toe-taping walk exercise were identified to have a partial statistical significance on the basic lower body strength (muscular strength, power, and balance) and walking (length of gait line, plantar pressure, and COP) of women in their 20s. Therefore, the study confirmed the effects of ankle-strengthening exercises and toe-taping walk exercise on the lower body exercise function, and it is considered that further studies should be conducted on more various effects of the exercises by subdividing them into different pain locations and orthomechanic findings.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.120-125
• /
• 2010

The aim of study intends to investigate effect of All-out condition on physical balance, agility and power and to provide the base data for the safety of firefighter. The results of the study are as follows. For power estimation, the sargent jump is $41.0{\pm}3.2cm$ before estimation and $42.2{\pm}6.02cm$ after estimation as All-out condition. For static balance estimation, the closed-eyes foot balance is $40.3{\pm}36.8$sec before estimation and $27.5{\pm}27.18$sec after estimation. For dynamic balance estimation, the beam walking is $6.2{\pm}1.22$sec before estimation and $6.4{\pm}1.57$sec after estimation. The results are statistically significant. For agility estimation, the side step is $40.3{\pm}3.40$rep/20sec before estimation and $43.3{\pm}2.50$rep/20sec after estimation. The results are statistically significant. The wholebody reaction time is $0.21{\pm}0.05$sec before estimation and $0.18{\pm}0.02$sec after estimation.