• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.198-200
• /
• 2001

In this paper, we describe the developed learning tool of expert system for preventive diagnosis of substation power equipments. The expert system was programmed by using the diagnosis methods as like gas analysis in oil and partial discharge, hottest temperature, the current of OLTC driving meter, the current of fan and pump in MTr and driving coil current in GCB and leakage current in LA. The learning tool is composed of the expert system and the explanation of diagnosed examples and the applied rules and it well worked according to the rule.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.1-8
• /
• 2017

The optimal gain design method of a three-phase boost converter is proposed in this study. The control system has a two-loop configuration, in which each controller is coupled closely; thus, the optimal design is difficult to achieve using conventional gain-tuning method. The proposed method is adopted to the MATLAB SISO TOOL software and is based on the controller requirements, which are phase margin and cut-off frequency of the open-loop system. The optimal proportional -integral gains can be designed easily using the proposed interactive method of the SISO TOOL. The performance of the proposed system is verified through simulation and experiments.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.206-213
• /
• 2011

Line sleeves, which used to connect ACSR cables when transmission lines were constructing, sometimes cause power transmission failure due to deterioration and corrosion. Therefore, power transmission line should be inspected regularly to prevent national disaster. Current inspection tool detects insertion length of transmission line on line sleeves, the inspection tool includes enormous error by operator. Moreover, the system is not controlled remotely, negligent accident would be caused while inspecting. To deal with those problems, KEPCO reviewed several ways to inspect line sleeves and proposes new method to inspect line sleeve by measuring magnetic flex which penetrate junction of steel and aluminum sleeve. The developed inspection tool is reliable enough to detect eccentric sleeves. Also, the developed inspection device was applied on actual transmission line and verified its effectiveness.

• 한국항공우주학회지
• /
• 제42권9호
• /
• pp.779-788
• /
• 2014

저궤도 위성이 제한된 전력 내에서 임무를 성공적으로 수행하기 위해서는 효율적인 전력생산이 중요하다. 이를 위해 저궤도 소형위성의 전력계에서는 주로 MPPT (Maximum Power Point Tracking) 방식을 사용하여 태양전지에서 생산되는 전력을 조절한다. 본 연구에서는 소형 큐브위성(KAUSAT-5)에 적용될 퍼지 로직 기반의 MPPT 알고리즘을 제안하며, 제안된 방법의 유용성을 확인하기 위해 MATLAB/Simulink와 STK (Systems Tool Kit)를 연동하여 시뮬레이션을 수행하였다. Simulink와 STK를 이용하여 위성 궤도와 자세에 따른 태양 광량과 운용모드에 따라 변하는 부하용량에 대해 KAUSAT-5의 두 가지 지향모드에서 EBA(Energy Balance Analysis)를 수행하였고, 이를 통해 제안된 퍼지 로직 기반의 MPPT 알고리즘의 성능을 확인하였다. 제안된 퍼지 로직 기반의 MPPT는 가장 일반적인 방법의 하나인 P&O (Perturbation & Observation)와 성능을 비교하여 유용성을 확인하였다.

• 한국산업정보학회논문지
• /
• 제14권3호
• /
• pp.76-97
• /
• 2009

전략경영의 중요이슈는 전략수립, 전략실행 및 성과측정에 이르는 일련의 전력경영과정을 하나의 관리적 이론으로 통합하는데 있다. 본 논문은 파워프로세스에 기초하여 전략경영 과정을 하나의 관리적 이론으로 통합하기 위한 이론과 실천적 방안을 제시하여 전략적 성공이나 지속가능 경쟁우위에 기여하고자 한다. 이를 위하여 본 논문에서는 파워프로세스의 원리와 특성을 논의하고 이를 기반으로 전략경영의 과정의 통합을 위한 학술적 및 실천적 방안을 제시하고 있다. 또한 본 논문에서는 경쟁우위를 위한 산업구조, 자원기반 및 게임이론 접근의 가정과 경쟁적 환경 및 상대적 우위에 대해서 논의하고, 파워프로세스의 성격과 특성을 규명하여 파워프로세스에 의한 경쟁우위 접근이 이들과의 상대적 위치를 규명하였다. 파워프로세스는 경쟁우위를 위한 전략수립과 관리적 개념을 통합할 수 있는 이론적 및 경영적 방안을 제공할 뿐만 아니라 전략성공에 크게 기여할 수 있다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1951-1962
• /
• 1993

The creation process of a typical machined surface is treated here as a dynamic system. An investigation is carried out to establish a relationship between the characteristics of cutting force fluctuations that cause vibration response of the tool-workpiece system and the formation of surface in face cutting by sintered carbide cutting tool. Cutting force is measured and analyzed in frequency domain. The power spectral densities of cutting force give a useful information in surface generation and it can be used to find out the control factor of surface roughness. The terms, PSD ratio & Normalized spindle frequency PSD, are defined and when the value of power in spindle frequency is absolutely little but relatively large, it is obtained high accuracy surface roughness. The aim of this research is to find surface profile by measured and analyzed cutting force signals. The simulation of surface generation gives the comprechension of its mechanism and help to predict and control the surface quality. In this study, it is suggested what informations about surface generation can be acquired from the cuttuing force signal and an way of generating a better surface.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.57-74
• /
• 2009

Power signals resulting from spindle and feed motor, present a rich content of physical information, the appropriate analysis of which can lead to the clear identification of the nature of the tool wear. The partial least-squares regression (PLSR) method has been established as the tool wear analysis method for this purpose. Firstly, the results of the application of widely used techniques are given and their limitations of prior methods are delineated. Secondly, the application of PLSR is proposed. The singular value theory is used to noise reduction. According to grey relational degree analysis, sample variable is filtered as part sample variable and all sample variables as independent variables for modelling, and the tool wear is taken as dependent variable, thus PLSR model is built up through adapting to several experimental data of tool wear in different milling process. Finally, the prediction value of tool wear is compare with actual value, in order to test whether the model of the tool wear can adopt to new measuring data on the independent variable. In the new different cutting process, milling tool wear was predicted by the methods of PLSR and MLR (Multivariate Linear Regression) as well as BPNN (BP Neural Network) at the same time. Experimental results show that the methods can meet the needs of the engineering and PLSR is more suitable for monitoring tool wear.

• 대한음성학회지:말소리
• /
• 제44호
• /
• pp.93-104
• /
• 2002

There are many speech analysis tools available. Among them real-time analysis tool is very useful for interactive experiments. A real-time speech analysis tool was implemented using Matlab. Matlab is a very widely used general purpose signal processing tool. In general, its computational speed is relatively lower than that of the codes from conventional programming languages. Especially, real-time analysis including input of signal and output of the result was not possible in the past. However, due to the improvement of computing power of PCs and inclusion of real-time I/O toolboxes in Matlab, real-time analysis is now possible in some extent by Matlab only. In this experiment, we tried to implement a real-time speech analysis tool using Matlab. Pitch and spectral information is computed in real-time. From the result it is shown that such real-time applications can be implemented easily using Matlab.

• Journal of Astronomy and Space Sciences
• /
• 제37권3호
• /
• pp.187-197
• /
• 2020

In order to avoid the high cost and high risk of demonstration mission of rendezvous-docking technology, missions using nanosatellites have recently been increasing. However, there are few successful mission cases due to many limitations of nanosatellites like small size, power limitation, and limited performances of sensor, thruster, and controller. To improve the probability of rendezvous-docking mission success using nanosatellite, a rendezvous-docking phase analysis tool for nanosatellites is developed. The tool serves to analyze the relative position and attitude control of the chaser satellite at the docking phase. In this tool, the Model Predictive Controller (MPC) is implemented as a controller, and Extended Kalman Filter (EKF) is adopted as a filter for noise filtering. To verify the performance and effectiveness of the developed tool for nanosatellites, simulation study was conducted. Consequently, we confirmed that this tool can be used for the analysis of relative position and attitude control for nanosatellites in the rendezvous-docking phase.