• 제목/요약/키워드: Power Take Off

검색결과 175건 처리시간 0.03초

Ti 합금을 이용한 항공기용 Flexible PTO 샤프트 개발 시험 (Development Test for Flexible PTO Shaft Made of Ti Alloy for Aircraft)

  • 이주홍;강보식;유현석;이지만;조해용
    • 대한기계학회논문집A
    • /
    • 제40권8호
    • /
    • pp.759-765
    • /
    • 2016
  • 항공기 등에 사용되는 Flexible PTO(Power Take-Off) 샤프트는 스프링 특성을 좋게 하기 위해 여러장의 얇은 멤브레인을 용접한 형태로 1950년대에 이미 개발됐으며, AMAD(Aircraft Mounted Accessory Drive) 기어박스와 EMAD(Engine Mounted Accessary Drive) 기어박스 사이에서 회전동력을 전달한다. 이런 종류의 샤프트는 가볍고 특히 스프링 특성이 좋기 때문에 축 정렬이 틀어진 고속회전 상태에서도 안정적으로 회전동력을 전달할 수 있어 대부분의 전투기에 사용된다. 이번 연구에서 티타늄 합금으로 개발된 Flexible PTO 샤프트의 구조해석을 통해 제품의 안전성을 확인하였고, 실제 실험실에서 진행된 고속회전 시험에서 굽힘과 비틀림 부하를 동시에 인가하여 샤프트의 고주기 피로에 대한 내성을 실증하였다. 또한, 고주기 피로 시험 조건에서 항공기용 볼 조인트의 마모 특성 분석을 통해 수명을 예측하였다.

Anuran Metamorphosis: a Model for Gravitational Study on Motor Development

  • Jae Seung;Jin Cheul;In-Ho;Park, In-Ho
    • Animal cells and systems
    • /
    • 제4권3호
    • /
    • pp.223-229
    • /
    • 2000
  • Limbs and supporting structures of an organism experience a full weight of its own when it lands from water, because neutral buoyancy in the aquatic habitat will be no longer available in the terrestrial world. Metamorphosis of anuran amphibians presents 8 good research model to examine how this transition from non-loading to weight-loading affects development of motor capacity at the time of their first emergence on land. Our video analysis of the transitional anurans, Rana catesbeiana, at Gosner stage 46 (the stage of complete transformation) demonstrated that the take-off speed increased 1.23-fold after the first six hours of weight-loading on the wet ground. It did not increase further during the following three days of loading, and was close to the level of mature frogs with different body mass. During development of larvae in deep water with no chance of landing through metamorphosis, both tension and power of a hindlimb anti-gravity muscle increased 5-fold between stages 37 and n. However, the muscle contractility increased more rapidly when the larvas could access the wet ground by their natural landing behavior after stages 41-42. Muscle power, one of major factors affecting locomotory speed, was 1.29-fold greater in the loaded than in the non-loaded larvae at the transitional stage. Thus, weight-loading had a potentially significant effect on the elevation of motor capacity, with a similar extent of increment in locomotory speed and muscle power during the last stages of metamorphosis. Such a motor adjustment of the froglets in a relatively short transitional period would be important for effective ecological interactions and survival in their inexperienced terrestrial life.

  • PDF

eVTOL PAV 유형별 항속거리 및 항속시간 분석 (Flight Range and Time Analysis for Classification of eVTOL PAV)

  • 이봉술;윤주열;황호연
    • 한국항행학회논문지
    • /
    • 제24권2호
    • /
    • pp.73-84
    • /
    • 2020
  • 자동차 대수의 증가로 인한 지상 교통의 혼잡을 극복하기 위해 많은 회사들이 새로운 방식의 운송 수단인 미래형 개인항공기(PAV)를 제안하였다. 미래형 개인항공기 중에서도 전기를 동력으로 사용하고 수직 이착륙이 가능한 전기수직이착륙(eVTOL)항공기가 주목을 받고 있으며 그러한 항공기들의 형상은 멀티콥터형에서 틸트 덕티드팬까지 다양하다. 본 연구에서는 eVTOL 유형별 장단점 등 특성을 분석하였다. 틸트날개형, 복합형, 멀티콥터형의 대표적인 eVTOL PAV인 바하나, 오로라, 볼로콥터에 대해 구성성분 합계 방식을 사용하여 유해항력을 구하였으며, 항공기 설계 및 공력 해석 프로그램인 OpenVSP와 XFLR5 프로그램을 사용하여 표면적과 유도항력을 구하였다. eVTOL PAV에 사용되는 배터리는 테슬라 2170 배터리로 가정하고 항속거리를 계산하였다. 또한 각 eVTOL에 대해 이착륙 및 순항을 포함한 임무형상별로 에너지소모 및 최대 비행시간을 계산하여 비교하였다.

Electrical Technologies for Grid Integration of Ocean Wave Power into the UK National Grid

  • Ahmed, Tarek
    • Journal of Power Electronics
    • /
    • 제10권3호
    • /
    • pp.320-327
    • /
    • 2010
  • In this paper, multiple offshore wave energy converters with different output characteristics are connected to one power distribution substation. The connection between the power take-off of the different wave energy converters and the electrical power transmission system is presented in order to investigate whether multiple wave energy converters can augment energy yield and improve network integration capabilities. Moreover, the model of an array of wave energy converters is developed with the goal of analyzing the effects of the offshore wave farm on the electrical network to which it is connected. It is also developed to ensure that the electricity generated by the array is sufficiently controllable, and of a quality that can be integrate into the electricity supply network without unduly increasing the cost of connection, production or delivery.

비콘 기반 저속 WPAN에서의 적응적 백오프 알고리즘 (An Adaptive Back-off Algorithm in Beacon-Enabled LR-WPAN)

  • 박성우
    • 한국전자통신학회논문지
    • /
    • 제11권8호
    • /
    • pp.735-742
    • /
    • 2016
  • 저속 WPAN은 저속, 저전력, 저비용의 단거리 무선 네트워킹 기술이다. 저속 WPAN에서는 경쟁 기반의 CSMA/CA 알고리즘을 사용하여 디바이스들의 무선 채널 접속을 제어하기 때문에 프레임 전송시 언제라도 충돌이 발생할 수 있으며 이로 인해 네트워크 성능이 심각하게 저하될 수 있다. 본 논문에서는 저속 WPAN의 CSMA/CA 과정에서 프레임 충돌율을 줄이기 위해 네트워크 상황에 따라 백오프 구간을 동적으로 변화시키는 알고리즘을 제안한다. 시뮬레이션 수행 결과, CSMA/CA 과정에서 제안하는 동적 백오프 알고리즘은 백오프 구간을 정적으로 유지했을 경우에 비해 프레임 전달율과 지연 시간 측면에서 안정적이면서도 우수한 성능을 보이는 것을 확인하였다.

Analysis of the load distribution and contact safety factor of PTO gears of a 71 kW class agricultural tractor

  • Baek, Seung-Min;Kim, Wan-Soo;Kim, Yeon-Soo;Lee, Nam-Gyu;Kim, Nam-Hyeok;Kim, Yong-Joo
    • 농업과학연구
    • /
    • 제47권2호
    • /
    • pp.327-335
    • /
    • 2020
  • The purpose of this study was to analyze the load distribution and contact safety factor for the power take off (PTO) gear of a 71 kW class agricultural tractor. In this study, a simulation model of the PTO gear-train was developed using Romax DESGINER. The face load factor and contact safety factor were calculated using ISO 6336:2006. The simulation time was set at 2,736 hours considering the lifetime of the tractor, and the simulation was performed for each PTO gear stage at the engine rated power conditions. As a result of the simulation, the face load factors for the driving gear at the PTO 1st, 2nd and 3rd stages were 1.644, 1.632, and 1.341, respectively. The contact safety factors for the driving gear at the PTO 1st, 2nd and 3rd stages were 1.185, 1.216, and 1.458, respectively. As the PTO gear stage was increased, the face load factor decreased, and the contact safety factor increased. The load distributions for all the PTO gears were concentrated to the right of the tooth width. This causes stress concentrations and shortens the lifespan of the gears. Therefore, it is necessary to improve the face load factor and the contact safety factor with macro-geometry and micro-geometry.

동력경운기 견인형 TMF 배합기의 개발 (Development of a Power-tiller TMF Mixer)

  • Jo, Gi-Hyeon;Lee, Jeong-Taek;Baek, Lee
    • Journal of Biosystems Engineering
    • /
    • 제28권2호
    • /
    • pp.97-106
    • /
    • 2003
  • One of the obstructing factors against managing dairy fm has been heavy labor requirement for feeding dairy cows. A Power-tiller TMF mixer was developed to reduce the cost and to provide economic benefit. The TMF mixer was desisted by the feeding capacity of 20∼30 heads at a batch with various functioning systems of auger type mixer, delivery conveyer, weighing console, pipe heater type heating system, power transmission train and mounting trailer. According to the study resulted, it showed that 1,200rpm, 1,600rpm, 2,000rpm and 2,300rpm were 6ps. Bps, lops and 12ps respectively. and that reduced shaft output by 15%. On the fodder mixer attached powertiller, initial output was necessary large torque. And the heating system was maintaining uniform temperature 60$^{\circ}C$ relatively.

특장 차량용 하이브리드 발전시스템의 출력특성 (Output characteristics of hybrid power generation system for special vehicles)

  • 한근우;최명현;김성곤;이충훈;한만승;정영국
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.288-289
    • /
    • 2017
  • This study deals with output characteristics of a hybrid power generation system for a vehicle such as a crane, a fire engine, and a wingbody. The proposed method obtains the commercial AC voltage of single phase 220V/60Hz by connecting a variable speed three-phase PMSG(Permanent magnetic synchronous generator) and an AC/DC/AC power converter to PTO (Power take off) or hydraulic motor. The proposed system is fabricated and tested to demonstrate the usefulness of the proposed system.

  • PDF

Differences in EMG of Trunk and Lower Limb According to Attack Method and Phase During Volleyball

  • Jeong, Hwan Jong;Baek, Gwang Eon;Kim, Ki Hong
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제13권1호
    • /
    • pp.143-151
    • /
    • 2021
  • The purpose of our study is to confirm the trend of the muscle activity of the trunk and lower limb muscles by the attack method and phase during volleyball exercise. To achieve this purpose, spike serve and spike were conducted for 9 male middle school students, and at that time, it was divided into four phase, such as run jump, take off, impact, and follow, and the rectus abdominis, erector spine, and left rectus femoris, left biceps femoris, left anterior tibialis, left gastrocnemius midialis, right rectus femoris, right biceps femoris, right anterior tibialis, right gastrocnemius midialis, were examined. Spike serve and spike were each performed three times, and randomly cross-allocated to extract accurate data. We was no difference in all muscles according to the attack method, and the muscle activity of the rectus abdominis was highest in the impact phase and the muscle activity of the vertebral spine muscle was highest in the close-up phase. In addition, all of the measured left and right lower limb muscles showed the highest muscle activity between the assisted devices. As a result, We found out that regardless of the method of spike serve and spike, the lower limbs in the run-up phase for a high jump, the vertebrae in the take off phase, the preparation phase for hitting the ball strongly, and in the impact phase at the moment of hitting the ball. It can be seen that it exerts the greatest power in the rectus abdominis.

Study on Multi-scale Unit Commitment Optimization in the Wind-Coal Intensive Power System

  • Ye, Xi;Qiao, Ying;Lu, Zongxiang;Min, Yong;Wang, Ningbo
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권6호
    • /
    • pp.1596-1604
    • /
    • 2013
  • Coordinating operation between large-scale wind power and thermal units in multiple time scale is an important problem to keep power balance, especially for the power grids mainly made up of large coal-fired units. The paper proposes a novel operation mode of multi-scale unit commitment (abbr. UC) that includes mid-term UC and day-ahead UC, which can take full advantage of insufficient flexibility and improve wind power accommodation. First, we introduce the concepts of multi-scale UC and then illustrate the benefits of introducing mid-term UC to the wind-coal intensive grid. The paper then formulates the mid-term UC model, proposes operation performance indices and validates the optimal operation mode by simulation cases. Compared with day-ahead UC only, the multi-scale UC mode could reduce the total generation cost and improve the wind power net benefit by decreasing the coal-fired units' on/off operation. The simulation results also show that the maximum total generation benefit should be pursued rather than the wind power utilization rate in wind-coal intensive system.