• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.823-825
• /
• 2003

A sensor system was designed to measure real time vibro displacement of civil structure. The He-Ne laser is used for the displacement measuring method, because it guarantees short time stabilization, long time output power stability. Also, it guarantees simple maintenances and repairs under actual using condition. The line CCD image sensor(Tcd-142d) is used to detect the displacement of Ne-Ne laser responding to the vibro of civil structure. For accurate measurement and comparison, CDP-50 is used. Usually CDF-50 (Strain type displacement device) is used for the standard correction device of optical measurement equipments. The data processing part is consists of Optical sensor part, Wireless data transmission device, DAQp-1200, and LapView program. The displacement data of vibro from optical sensor part inputted to wireless data transmission device and then transmitted to DAQp-1200 in main control room. DAQp-1200 performs A/D conversion for the receiving data. After that the converted data inputted to computer system using LapView program for user display. The significance of this paper is to develope a convenient, accurate and lost saving real time displacement measurement system for the civil structure.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.28-32
• /
• 2023

Recently, the use of stable lithium nanostructures as substrates and electrodes for secondary batteries can be a fundamental alternative to the development of next-generation system semiconductor devices. However, lithium structures pose safety concerns by severely limiting battery life due to the growth of Li dendrites during rapid charge/discharge cycles. Also, enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against oxide solid electrolytes. For the development of next-generation system semiconductor devices, solid electrolyte nanostructures, which are used in high-density micro-energy storage devices and avoid the instability of liquid electrolytes, can be promising alternatives for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, a low-dimensional Graphene Oxide (GO) structure was applied to demonstrate stable operation characteristics based on Li+ ion conductivity and excellent electrochemical performance. The low-dimensional structure of GO-based solid electrolytes can provide an important strategy for stable scalable solid-state power system semiconductor applications at room temperature. The device using uncoated bare NCA delivers a low capacity of 89 mA h g-1, while the cell using GO-coated NCA delivers a high capacity of 158 mA h g−1 and a low polarization. A full Li GO-based device was fabricated to demonstrate the practicality of the modified Li structure using the Li-GO heterointerface. This study promises that the lowdimensional structure of Li-GO can be an effective approach for the stabilization of solid-state power system semiconductor architectures.

• 한국지능시스템학회논문지
• /
• 제5권2호
• /
• pp.58-69
• /
• 1995

본 논문에서는 자기조정 퍼지제어기의 한 설계기법을 제안하고, 이를 전력계통 안정화에 적용하였다. 제안된 퍼지제어기의 파라미터는 최급강하법에 의하여 멤버쉽 함수의 중심치와 폭이 최적인 값으로 자지고정 되어진다. 이를 전력계통에 적용한 결과 제안된 제어기법이 종래의 제어기법보다 응답특성이 우수함을 보였다.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.48-68
• /
• 2000

The high-speed machining technology of difficult-to-cut material is needed to achieve the high-efficiency of die manufacturing. The high-speed machining is applied in automobile, airplane and electricityㆍelectro industry etc, because it can improve machining efficiency and productivity with high speed, high power and high rotation. In this study, high speed machinability, tool wear characteristics and its monitoring, characteristics of damaged layer, machinability of difficult-to-cut material, characteristics of a free curved surface and method of CAD/CAM system were introduced to acquire the shortening of machining time, the improvement of machining efficiency and the high quality of machined surface. Therefore, we establish the stabilization condition of difficult-to-cut material machining and present the optimal cutting condition for high-efficiency cutting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.164-165
• /
• 2011

본 논문에서는 전력계통의 동요시 넓은 범위의 안정영역을 확보하고 발전기의 댐핑을 향상시킬 수 있는 새로운 조속기 제어기를 제안한다. 전력계통의 안정도는 대부분 고장기간 동안 발전기에 축적된 잉여 운동에너지에 크게 영향을 받기 때문에 이러한 잉여에너지에 대한 효과적인 제어는 조속기를 통해 이루어 질 수 있으며, 전력계통 안정도를 향상시킬 수 있는 가장 직접적인 방법이다. 제안된 Output Feedback 제어기는 모든 주파수 조절상수(R)에 대해 넓은 범위의 안정성을 보장하고, 미분기를 대신할 수 있도록 발전기 동요방정식을 적용한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권9호
• /
• pp.952-960
• /
• 2000

본 논문에서는 퍼지 자동회귀 이동평균 (Fuzzy Auto-Regressive Moving Average, FARMA)제어기를 전력계통의 비선형 2기 5모선 (Two Machine - Five Bus)모형의 주파수 안정화에 적용한 결과를 제시한다 퍼지 자동회귀 이동 평균 제어기는 기존의 전문가에 의존하였던 퍼지제어 규칙을 실시간으로 형성해 나가는 구조이다. 복잡성, 비선형성 등 전력계통의 일반적인 특징들을 기술하고, 그 특징을 표현할 수 있는 비선형 2기5모선 모형을 제시한다. 제시된 모형을 바탕으로 기존 제어 방식과의 성능 비교를 실시하였고, 이를 통하여 FARMA 제어기의 우수성을 확인하였다.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.114-114
• /
• 2000

In this paper, a current comparative frequency automatic tuning circuit for the CMOS bandpass filter are designed with the new architecture. And also, when the designed circuit is compared the typical tuning circuit, it has very simple architecture that is composed of the current comparator and charge pump and operated in 2V power supply. The proposed tuning circuit automatically compensate the difference between the operating current of the integrator and the reference current which is specified. Using CMOS 0.25um parameter, a CMOS bandpass active filter with center frequency(f0= 100MHz) is designed, and according to the transister size the variation of the center frequency is simulated. As the HSPIC simulation results, the tuning operating of the proposed current comparative frequency automatic tuning circuit is verified.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.383-386
• /
• 2008

We developed a fiber-optic Bragg grating sensor system using a SOA fiber laser for over heat detection in power systems. To compensate the nonlinear wavelength tuning of the fiber laser, we used fixed passband wavelengths from Fabry-Perot ITU filter as reference wavelengths. Gaussian line-fitting algorithm was also used to reduce the FBG peak detection error. Compared with a highest-peak-detection and a polynomial-fitting method, the proposed Gaussian fitting algorithm could drastically reduce the measurement errors. Also the SOA fiber laser made it possible to enhance the signal-to-noise-ratio even with several kilometers of lead fiber.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.506-507
• /
• 2010

유도가열용 공진형 인버터는 부하에 전류가 흐르면 전자유도 작용에 의해서 와전류가 발생된다. 이 와전류에 의해 발열체가 가열되는 시스템이다. 그러나 유도가열용 인버터에 사용되는 IGBT나 MOSFET와 같은 스위칭 소자들은 스위칭 시 순간 과전류의 발생이나 외부의 이상과전류로 인해서 소자가 파괴 되거나 오작동을 일으키게 되어 전기기기의 손상을 가져올 수 있다. 이를 방지하기 위하여 공급 전원에 비교기를 사용하여 전류의 변화를 감지하고 전류를 차단하는 고주파 직렬 공진형 인버터를 이용한 유도가열 시스템의 안정화에 관한 연구를 하고자 한다.

• 드라이브 ㆍ 컨트롤
• /
• 제14권3호
• /
• pp.25-31
• /
• 2017

This study presents a methodology for simulating a unified approach that controls interaction force between tool and objective by using a synthesis method of robot interacting control law for stabilizing the transient process of motion. Root locus is used to analyze stabilization of motion deviation characteristics. Based on responses of motion deviation, contact force is derived to satisfy exponential stability and we generate control input with respect to motion trajectories and interaction force. Moreover, simulation is applied to experimental application of a Cartesian robot driven by two stepper motors, and the noise of feedback signals is considered as presence of system inaccuracies, and the unified approach of interaction force control is examined precisely.