• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.227-234
• /
• 2015

This paper presents the application of bee colony optimization (BCO) to obtain the optimal switching angles for single phase PWM AC choppers. The optimal switching angles are found in the region of 0-${\pi}$ based on the asymmetrical PWM technique. This PWM process results in improvements of the total harmonic distortion of the output voltage and in the input power factor. Simulation and experimental results are compared with the conventional PWM to verify the performance of the proposed PWM process.

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.312-318
• /
• 2005

This paper presents a compensator for reduction of the reactive lateral current in multiple autonomously controlled uninterruptible power supplies (UPS) connected in parallel. This compensator acts directly on the control equation for voltage amplitude and it provides an improved current distribution especially in the case of parallel connection of UPSs with different output power ratings. Observations show that the original control equation for output voltage amplitude is efficient for voltage regulation but it causes great variation of voltage levels. A compensator with the same structure is added to counterbalance the variation caused by the original control equation. Simulations show promising results with the employment of the proposed compensator. Our simulations are confirmed by experimental results using three UPSs with different output ratings and voltage limiters ($1\%$) connected in parallel under various conditions.

• 한국정보전자통신기술학회논문지
• /
• 제11권5호
• /
• pp.475-480
• /
• 2018

In OFDM-based systems, FFT is a critical component since it occupies large area and consumes more power. In this paper, we present a low hardware-cost and low power 512-point pipelined FFT design method for OFDM applications. To reduce the number of twiddle factors and to choose simple design architecture, the radix-$2^4-2^3$ algorithm are exploited. For twiddle factor multiplication, we propose a new canonical signed digit (CSD) complex multiplier design method to minimize the hardware-cost. In hardware implementation with Intel FPGA, the proposed FFT design achieves more than about 28% reduction in gate count and 18% reduction in power consumption compared to the previous approaches.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.749-759
• /
• 2018

Aiming at widely used high-pier bridges in Sichuan-Tibet Railway, this paper presents an investigation to design and evaluate the seismic vibration reduction effects of several measures, including viscous damper (VD), friction pendulum bearing (FPB), and tuned mass damper (TMD). Primarily, according to the detailed introduction of the concerned bridge structure, dynamic models of high-pier bridges with different seismic vibration reduction (SVR) measures are established. Further, the designs for these SVR measures are performed, and the optimal parameters of these measures are investigated. On this basis, the vibration reduction effects of these measures are analyzed and assessed subject to actual earthquake excitations in Wenchuan Earthquake (M=8.0), and the most appropriate SVR measure for high-pier bridges in Sichuan-Tibet Railway is determined at the end of the work. Results show that the height of pier does not obviously affect the performances of the concerned SVR measures. Comprehensively considering the vibration absorption performance, installation and maintenance of all the employed measures in this paper, TMD is the best one to absorb vibrations induced by earthquakes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.153-154
• /
• 2008

This paper presents a window-based software package for the education and training for the reduction of power system by using locational marginal price (LMP), clustering, and similarity indices of each bus. The developed package consists of three modules: 1) the LMP module, 2) the Clustering module and 3) the Reduction module. Each module has a separated and interactive interface window. First of all, LMPs are created in the LMP module, and then the Clustering module carries out clustering based on the results of the LMP module. Finally, groups created in this Clustering module are reduced by using the similarity indices of each bus. The developed package displays a variety of tables for results of the LMPs of base network, voltages, phases and power flow of reduced network so that the user can easily understand the reduction of network. To demonstrate the performance of the developed package, it is tested for the IEEE 39-bus power system.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.620-631
• /
• 2000

본 논문에서는 인버터의 스위칭 주파수가 0.5-1kHz로 제한되는 3레벨 인버터로 구동되는 고전압 대용량 유도 전동기 직접토크제어의 토크리플 저감법을 제안한다. 기존의 토크리플 저감법은 인버터 스위칭 주파수가 비교적 높은 2-3kHz에서 동작하는 알고리즘으로 1kHz이하의 낮은 인버터 스위칭 주파수의 시스템에 적용하면 만족할만한 토크 라플 저감 성능블 얻을 수 없다. 새로운 직접토크제어 기법은 특히 낮은 스위칭 주파수를 갖는 시스템에 적용하기 위한 것이며, 모든 동작 속도 구간에서 토크리플 저감 성능을 나티낸다. 시뮬레이션과 실험을 통해 세안한 알고리즘의 타당성을 입증한다.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.236-242
• /
• 2004

Previous research results indicated that the designed current reduction device could effectively reduce the sheath circulating current and that its RDP protection device could shield it against both fault and lightning strokes. In this paper, cable impedance is analyzed using wavelet analysis and distance relay algorithm following the installation of these devices so that the operation of distance relay can be estimated. The test results confirm that in these devices, the fault inception angle and SVL bonding types have no impact on the change of cable impedance. In other words, the conventional distance relay can be used without a new relay setting. Thus we can finally assert that the designed current reduction device and its protection device are effective and can be safely installed on the cable transmission system without disturbance.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1296-1304
• /
• 2013

This study performed an analysis on power demand reduction effects exhibited by demand response programs, which are advanced from traditional demand-side management programs, in the smart grid environment. The target demand response systems for the analysis included incentive-based load control systems (2 month-ahead demand control system, 1~5 days ahead demand control system, and demand bidding system), which are currently implemented in Korea, and price-based demand response systems (mainly critical peak pricing system or real-time pricing system, currently not implemented, but representative demand response systems). Firstly, the status of the above systems at home and abroad was briefly examined. Next, energy saving effects and peak demand reduction effects of implementing the critical peak or real-time pricing systems, which are price-based demand response systems, and the existing incentive-based load control systems were estimated.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.319-323
• /
• 2012

Transmission is one of the important pars to transmit power from engine to wheels. Mass reduction gears can make the engine power requirement reduce, and can make dynamic performance and fuel efficiency of vehicle improve. Transmission gears are modified for mass reduction without changing their tooth shapes, face widths, and modules by using shape optimization and re-check process. Also structural stability is verified by FEA.