• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.321-322
• /
• 2015

Thermoelectric power generation has emerged as a promising alternative technology because it offers a potential application in the direct conversion of waste heat into electric energy. The performance of thermoelectric power generator depends on thermoelectric materials and thermoelectric power module designs. The main objective of this study is to design a 100W thermoelectric generation (TEG) module and to get optimal operating conditions of the module. The design and performance of the TEG module will be presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.487-494
• /
• 2019

A Small-Sat Power System Design and Development should be depend on space environment such as solar wind with Electromagnetic field by hurdle of techniques. It is surmount solution of trend that will unitize and converge with power module in these days. The level of modularize means that applying Universal Middleware for payload power module requirements. The scope of target system is a main power provider module and operational subunit that can be implemented with the final power module distribution loads to consume for continuous process. A Universal Middleware strengthen to build power module from satellite power system should be accuracy and consuming data. A Power Service Module and dynamic system drive interactive management between power distribution and consumer module by Range Control. Consequently, suggesting evaluation, unexpecting payload system power consumer that makes fine variable resources in the development design process and efficiency.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.41-44
• /
• 2000

This paper represent about design of the controller for battery of a reflector of retaining wall for power supply using PV Module. Simulation is represents V-I and power characteristic by Mathematica & Design Cneter 6.3 & Qnet 2.1 Finally we composed of road surface-signpost system. This system is successfully operating with high clearness lights.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.135-144
• /
• 2008

A bootstrap circuit is widely used for the floating gate power supply of Intelligent power module (IPM). A bootstrap circuit is simple and inexpensive. However, the duty cycle and on-time are limited by the requirement to refresh the charge in the bootstrap capacitor. And the value of the bootstrap capacitor should be increased as the switching frequency decreases. A charge pump circuit can be used to overcome the problems. This paper deals with an analysis and design of a charge pump circuit for the floating gate power supply of an IPM. The simulation and experiment are carried out for an induction motor drive system. The results well verifies the validity of the proposed circuit and design method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.124-130
• /
• 2011

In this paper, We design and implementation of Self-Charging Module for charging to battery which obtaining the environment inergy such as solar energy. The power chared battery through the charging module send to sensor node. And implementation of System Activation Module(SAM) based on ID system and Dynamic Power Management Module(DPM) with SPO(Self Power Off). This system consume power only communication between the sensor nodes. We verification this system by implementing the high efficiency poweer management system.

• IE interfaces
• /
• v.14 no.2
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.79-87
• /
• 2005

This paper describes a new on-board computer design for the next generation satellite. The new on-board computer utilizes centralized processing architecture with MCMERC325C CPU based on functional modular design concepts. The on-board computer consists of PM32 Module, TC-TM Module, IO Module and Power module. The IEEE-1355 DS/DE, or SpaceWire, provides a standard communication interface between module. It also provides simple cross-strap design for redundancy management and increases re-usability of the modules.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1486-1495
• /
• 2019

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.109-117
• /
• 2017

This paper describes the design and implementation of a unit module for a 10 kVA class 13.2 kV/220 V unidirectional solid-state transformer (SST) with silicon-carbide metal-oxide-semiconductor field-effect transistors. The proposed module consists of an active-front-end (AFE) converter to interface 1320 V AC voltage source to 2500 V DC link and an isolated resonant DC-DC converter for 500 V low-voltage DC output. The design approaches of the AFE and the isolated resonant DC-DC converters are addressed. The control structures of the converters are described as well. The experiments for the converters are performed, and results verify that the proposed unit module can be successfully adopted for the entire SST operation.