• 제목/요약/키워드: Power Mode

검색결과 4,686건 처리시간 0.03초

Ar 가스 압력과 RF 전력변화에 따른 유도결합형ㆍ플라즈마 E-H모드 변환의 광학적 특성 (Optical E-H Transition Properties of Inductively Coupled Plasma with Ar Gas Pressure and RF Pourer)

  • 허인성;조주웅;이영환;김광수;최용성;박대희
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권1호
    • /
    • pp.20-23
    • /
    • 2004
  • In this paper, the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber, a RF power of 13.56 [MHz] was applied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar I line, luminance were investigated. At this time, the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10∼60 [mTorr], 10∼300 [W], respectively. From emission intensity and lumnance intensity results, the mode transition from E-mode to H-mode was observed. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

A Broadband Half-Mode Substrate Integrated Waveguide Quadrature Wilkinson Power Divider Using Composite Right/Left-Handed Transmission Line

  • Eom, Dong-Sik;Lee, Hai-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제17권1호
    • /
    • pp.9-13
    • /
    • 2017
  • In this work, a broadband composite right/left-handed (CRLH) half-mode substrate integrated waveguide (HMSIW) quadrature Wilkinson power divider is proposed. The proposed CRLH-HMSIW quadrature power divider includes a microstrip Wilkinson power divider on the transition structure between the microstrip and HMSIW, and two thru transmission lines for the HMSIW and the CRLH-HMSIW. The measured amplitude, phase difference and isolation between the two output ports of the proposed structure have 1 dB, ${\pm}5^{\circ}$ and less than -15 dB in a wide frequency range of 4.1-6.68 GHz with 47.9% bandwidth, respectively.

Design and Implementation of an Active EMI Filter for Common-Mode Noise Reduction

  • Lee, Kuk-Hee;Kang, Byeong-Geuk;Choi, Yongoh;Chung, Se-Kyo;Won, Jae-Sun;Kim, Hee-Seung
    • Journal of Power Electronics
    • /
    • 제16권3호
    • /
    • pp.1236-1243
    • /
    • 2016
  • This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

Time-Delay Effects on DC Characteristics of Peak Current Controlled Power LED Drivers

  • Jung, Young-Seok;Kim, Marn-Go
    • Journal of Power Electronics
    • /
    • 제12권5호
    • /
    • pp.715-722
    • /
    • 2012
  • New discrete time domain models for the peak current controlled (PCC) power LED drivers in continuous conduction mode include for the first time the effects of the time delay in the pulse-width-modulator. Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between the two conduction modes. Especially, the time delay can provide an accurate LED current for the PCC buck converter with a wide input voltage. The models can also predict the critical inductor value at the mode boundary as functions of the input voltage and the time delay. The overshoot of the peak inductor current due to the time delay results in the increase of the average output current and the reduction of the critical inductor value at the mode boundary in all converters. Experimental results are presented for the PCC buck LED driver with constant-frequency controller.

Effects of Imperfect Sinusoidal Input Currents on the Performance of a Boost PFC Pre-Regulator

  • Cheung, Martin K.H.;Chow, Martin H.L.;Lai, Y.M.;Loo, K.H.
    • Journal of Power Electronics
    • /
    • 제12권5호
    • /
    • pp.689-698
    • /
    • 2012
  • This paper investigates the effects of applying different input current waveshapes on the performance of a continuous-conduction-mode (CCM) power-factor-correction (PFC) boost pre-regulator. It is found that the output voltage ripple of the pre-regulator can be reduced if the input current is modified to include controlled amount of higher order harmonics. This finding allows us to balance the performance of output regulation and the harmonic current emission when coming to the design of the pre-regulator. An experimental PFC boost pre-regulator prototype is constructed to verify the analysis and show the benefit of the pre-regulator operating with input current containing higher order harmonics.

저궤도 인공위성용 태양전력 조절기 설계 (A Design of Solar Array Regulator for LEO Satellites)

  • 박희성;차한주
    • 전기학회논문지
    • /
    • 제64권10호
    • /
    • pp.1432-1439
    • /
    • 2015
  • The solar array regulator supplies the electric power to the battery and the other units of a satellite by controlling the operating point of a solar array. In this paper, the solar array regulator composed with analog circuits is proposed. The solar array regulator has three modes. The first is a maximum power point tracking mode for harvesting the maximum photovoltaic power generation. The second is a power limitation mode which is designed for optimizing the volume and weight of the solar array regulator by preventing the excessive power conversion. The last constant voltage mode is proposed to keep the Li-Ion battery is not over-charge. The small signal model of the solar array regulator which has the reversed input and output variables in comparison with conventional converter is established and the stability is analysed. Finally, the proposed design of the solar array regulator is verified by experiments.

동력 분기 하이브리드 전기 자동차의 운행 모드 시뮬레이션 (Operation Modes of a Power Split Hybrid Electric Vehicle)

  • 안국현;조성태;임원식;박영일;이장무
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.547-550
    • /
    • 2006
  • The power split hybrid power train is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

  • PDF

PWM-based Integral Sliding-mode Controller for Unity Input Power Factor Operation of Indirect Matrix Converter

  • Rmili, Lazhar;Hamouda, Mahmoud;Rahmani, Salem;Blanchette, Handy Fortin;Al-Haddad, Kamal
    • Journal of Power Electronics
    • /
    • 제17권4호
    • /
    • pp.1048-1057
    • /
    • 2017
  • An indirect matrix converter (IMC) is a modern power generation system that enables a direct ac/ac conversion without the need for any bulky and limited lifetime electrolytic capacitor. This system also allows four-quadrant operation, generation of sinusoidal output voltage waveforms with variable frequency and amplitude, and control of input power factor. This study proposes a pulse-width modulation-based sliding-mode controller to achieve unity input-power factor operation of the IMC independently of the active power exchanged with the grid, as well as a fast dynamic response. The designed equivalent control law determines, at each sampling period, the appropriate q-axis component of the modulated input current to be injected into the grid through the LC input filter. An integral term of the error is included in the expression of the sliding surface to increase the accuracy of the control method. A double space vector modulation method is used to synthesize the direction of the space vector of the input currents as required by the sliding-mode controller and the space vectors of the target output voltages. Simulation and experimental results are provided to show the effectiveness and evaluate the performance of the proposed control method.

설득이론을 통한 해군력의 정치적 사용에 관한 고찰 (A Study of Political Use of Naval Power in Solving International Conflicts)

  • 양정승
    • Strategy21
    • /
    • 통권30호
    • /
    • pp.236-262
    • /
    • 2012
  • Morgenthau claims that in international relations, there are the economic, political, and military powers that enable a nation to achieve its political and diplomatic goals. This paper explores the possibility of resolving international conflicts with naval power. First, the theoretical and historical perspective, naval power was used as a final resort to force a nation's political or diplomatic objective on an enemy nation when negotiations failed, and this was done through the physical and psychological destruction of the enemy by naval power. But as the use of military power has decreased because of the invention of the nuclear weapon, the existence of a large and capable navy deterrent has become one of the most useful military options among a nation's diplomatic measures. In other words, he focused on the political usefulness of naval power as a deterrent and coercive diplomatic tool for persuading other nations to acquiesce, rather than using naval power and actual military action as a final resort. The reason for this is that compared to army and air force, navy's flexibility, continuity, and the ability to deter are greater. The navy provides excellent accessibility through its wide mobility on the sea, and it has been shown through research that the navy possesses a political usefulness that facilitates the solution of conflicts through presence, naval intervention, and naval blockade. On the other hand, among the factors that could improve the influence of the navy are alliance relations, a reliable and powerful navy, carrots and sticks that it would have to deal with in the case of successful or unsuccessful negotiations, and support from international opinion. On this paper I introduce E.N.Luttwak's naval suasion theory. By the his theory, there are two mode of naval suasion. One is latent naval suasion the other is active suasion. Latent suasion there are deterrent mode and supportive mode. Active naval suasion there are coercive mode and supportive mode. Coercive mode has positive and negative. The limitations of naval suasion have been identified as follows. First, because the objective of the use of naval power is persuading enemy nations, the results are unpredictable. Second, the leaders of all countries possess limited understanding on the complexities of naval power and therefore lack understanding of the usefulness of naval power when choosing options. Third, in case of failure through naval suasion, prestige and reputation of a nation can be damaged. Finally, the following are additional possible research topic. First, a research on the decision making process of choosing naval power as a measure to resolve conflicts is needed. Lastly, research on the size of the navy and types of ships required for efficient naval suasion is needed. Today's world requires cooperative security regime so that middle class navy also requires political use of naval power in solving international conflicts. Therefore, additional research on this topic is needed.

  • PDF

이동위성 통신용 광대역 2단 전력제어 HPA의 구현 및 성능평가에 관한 연구 (A Study on Fabrication and Performance Evaluation of Wideband 2-Mode HPA for the Satellite Mobile Communications System)

  • 전중성;김동일;배정철
    • 한국정보통신학회논문지
    • /
    • 제3권3호
    • /
    • pp.517-531
    • /
    • 1999
  • 본 논문에서는 INMARSAT-M형 송신기에 사용되는 L-BAND(1626.5-1646.5 MHz)용 2단 가변이득 전력 증폭기를 연구 개발하였다. 2단 가변이득 전력증폭기는 구동증폭단과 전력증폭단에 의해 고출력 모드일 때 +42 dBm, 저출력 모드일 때는 +36 dBm의 전력으로 증폭되며, 각각에 대해 상한 +1 dBm과 하한 -2 dBm의 오차를 허용한다. 제작의 간편성 때문에 전체 2단 가변이득 전력증폭기를 크게 구동증폭단과 전력증폭단 두 부분으로 나누어 구현하였으며, 전력증폭부를 구동하기 위한 구동단은 HP사의 MGA-64135와 Motorola사의 MRF-6401을 사용하였으며, 전력증폭단은 ERICSSON사의 PTE-10114와 PTF-10021을 사용하여 RF부, 온도보상회로 및 출력 조절회로를 함께 집적화 하였다. 이득조절은 구동증폭단의 MGA-64135의 바이어스 전압을 조절하는 방법을 제시하였으며, 실험 결과와 잘 일치하였다. 제작된 2단 가변이득 전력증폭기는 20 MHz대역폭 내에서 소신호 이득이 42 dB와 36 dB 이상, 입ㆍ출력 정재파비는 1.5:1 이하, 5 dBm의 $P_{1dB}$. $P_{ldB}$출력레벨에서 3 dB Back off 시켰을 때 32.5 dBc의 I $M_3$를 얻었다. 1636.5 MHz 주파수에 대해 출력전력은 43 dBm과 37 dBm으로서 설계시 목표로 했던 최대 출력전력 20 Watt를 얻었다.다.다.

  • PDF