• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1000-1006
• /
• 2007

본 논문에서는 CDMA 단말기용 상향 대역에서 송신출력을 모니터링 하는 전력검출부 회로를 제시한다. 제안된 전력검출부는 출력 전력 추출을 위한 커플러와 추출된 전력을 모니터링 해주는 검출기 회로로 구성된다. 본 논문에서 사용된 커플러는 손실이 적고, 위아래로 둘러싼 접지금속면으로 인해 외부의 전계와 차단되어 안정적인 동작이 가능한 스트립라인 구조를 갖는다. 설계 주파수는 CDMA 상향 송신 대역인 824-849MHz이고, 스트립라인 커플러의 결합계수는 -20dB이다. 전력검출기 설계를 위해 회로가 간단하고 전력손실을 최소화하면서 고속 동작을 할 수 있는 쇼트키 장벽 다이오드가 사용되었다. 일반적인 다이오드의 비선형성에 의한 검파 출력의 선형성 개선과 낮은 입력레벨의 출력 전압 감도 특성을 개선하기 위해서 낮은 검출기 입력 레벨에서의 임피던스 매칭을 하였다. 다이오드 패키지의 기생 성분을 고려한 시뮬레이션을 수행한 결과로써 예측한 성능은 측정 결과와 잘 일치한다.

• 한국콘텐츠학회논문지
• /
• 제7권3호
• /
• pp.25-33
• /
• 2007

전력계통의 갑작스런 고장은 막대한 경제적 손실을 초래함으로 이를 방지하기 위한 전력계통의 상태를 진단하는 모니터링은 무엇보다도 중요하다. 본 논문에서는 FCM과 SOM을 이용하여 다양한 전력설비 중에서 가장 중요한 역할을 담당하는 전력용 변압기의 고장진단 알고리즘을 개발한다. 즉, FCM은 효과적인 특징점을 선택과 학습시간을 줄이기 위해 수행하고, SOM에 의해 변압기의 고장진단이 이루어진다. 제안된 방법은 변압기의 고장진단 뿐만 아니라 열화진행추이 특성까지 분석한다. 제안된 방법은 다양한 사례 연구를 통해 우수성을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2464-2466
• /
• 1998

A switch is a component with two or more ports that selectively transmits, redirects, or blocks optical power in a fiber transmission line. Our switch uses rotation mechanism using stepping motor, hence the common optical fiber can scan and allign to one of the arrayed N optical fibers to provide optical path by electronic precise control. The developed switch is consisted of switching module and its control module. The performance parameters of a switching loss and a repeatability are considered very important. We performed the study to reduce the switching loss and improve the repeatability of switch. The switch can be widely used as a test instrument of optical device and of optical cable in factory, also of optical cable monitoring systems.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1021-1027
• /
• 2012

In this paper, multi-string power balancing system for streetlight was developed. Accordingly, the components of the system was developed, unit converters, MPPT control unit, a bank of Li-ion battery and controls the charging and discharging. Loss by improving the efficiency of the system through the parallel operation of the unit converter output will be reduced. And by improving the efficiency of the system through the unit converter parallel operation, output losses will be reduced. Charging and discharging efficiency of the device used in a typical solar streetlight is calculated based on the maximum power input. Because of the variation of the input power has a weakness. In this paper, flexible to changes in the input, and a system was developed to minimize the cost per watt. Measure the performance of the unit module from the system, the result was more than 91%. And the charging capacity 12 V/105 Ah, module power 180 W, respectively. Should expect to be able to improve performance through continuous monitoring in the future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.52-59
• /
• 2003

It is only possible through the image analysis of borehole wall and the core recovered from borehole constructed in rock mass that the real information about geologic characteristics in rock mass is directly obtained in primary research. Monitoring apparatus with multi-functional utility has implemented and applied in-situ condition for finding the geologic condition of target area. But, this apparatus is very expensive to be applied at the risk of loss during monitoring and cause hard work for moving them to the determined position. This paper shows the underground imaging from the borehole information obtained by a borehole camera with the simple utility and low cost enough to investigate the characteristics of borehole wall. Monitoring for this has been done in open-pit mine located at the northeastern part of Fukuoka Prefecture in Japan, and finally the three dimensional imaging of geological discontinuity was discussed relative to the field condition.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.24-30
• /
• 2021

There is an increasing interest in condition-based maintenance for the prevention of economic loss due to failure. Moreover, immense research is being carried out in related technologies in the field of construction machinery. In particular, data-based failure diagnosis methods that employ AI (machine & deep learning) algorithms are in the spotlight. In this study, we have focused on the failure diagnosis and mode classification of reduction gear of excavator's travel device by using the AI algorithm. In addition, a remote monitoring system has been developed that can monitor the status of the reduction gear by using the developed diagnosis algorithm. The failure diagnosis algorithm was performed in the process of data acquisition of normal and abnormal under various operating conditions, data processing and analysis by the wavelet transformation, and learning. The developed algorithm was verified based on three-evaluation conditions. Finally, we have built a system that can check the status of the reduction gear of travel devices on the web using the Edge platform, which is embedded with the failure diagnosis algorithm and cloud.

• 한국지능시스템학회논문지
• /
• 제18권6호
• /
• pp.737-745
• /
• 2008

최근 공정 및 계측기술이 발전함에 따라 밀링, 그라인딩, 브로칭 등 공정작업의 온라인 모니터링에 대한 관심이 높아지고 있다. 온라인 모니터링 시스템은 공구의 마모나 파손 등과 같은 공정변화를 가급적 조기에 발견함으로써 설비를 보호하고 불필요한 비용의 발생을 억제하는 데 그 목적을 두고 있다 본 논문에서는 온라인 공정관측 데이터가 프로파일로 주어질 때 웨이블릿변환을 이용한 $T^2$-검정과 신경회로망의 모니터링 성능에 대해 고찰한다. 2006년 Axinte가 제시한 절삭력 데이터를 이용하여 수치실험을 수행한 결과, 웨이블릿기반 $T^2$는 양호한 검출력을 나타냈지만 그 검사특성은 자기상관에 매우 민감하게 반응하였다. 반면, 자기상관의 존재 하에서도 신경회로망은 $T^2$-검정에 비해 매우 안정적인 검사특성을 갖는 것으로 나타났다. 이는 웨이블릿기반 $T^2$-검정에 노이즈분석을 위한 적응적인 요소가 필요하다는 점을 시사한다

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.11-14
• /
• 2018

High Temperature Superconducting (HTS) power cables are capable of transmitting bulk power without any loss compared to conventional copper cables. The major challenge in the design of such HTS cables is the high stresses (electro-thermal/electro-mechanical) developed at high voltages, high currents and cryogenic temperatures. The safe and reliable operation of HTS cables involves lots of instrumentation for monitoring, measurement, control and safe operation. In principle, a four probe method for resistance (RTD PT-100) is used for temperature measurements at various locations of HTS cable. The number of connecting leads required for this is four times that of the number of sensors. The present paper discusses a novel way of connecting 128 RTD sensors with the help of only 14 leads using a cold electronics based multiplexer board. LabVIEW 11.0 software was used for interfacing and displaying the readings of all the sensors on computer screen.

• 전기학회논문지P
• /
• 제63권1호
• /
• pp.1-6
• /
• 2014

An electric power system sometimes fails because of disturbances that occur unexpectedly, such as the uncontrolled loss of load that developed from cascading blackout. Which make stability through a little of under voltage load shedding should work. The development of phasor measurement unit(PMU) makes network supervision possible. The information obtained from PMU is synchronized by global positioning system(GPS). There are many real-time algorithms which are monitoring the voltage stability. This paper presents the study on the VILS(Voltage Instability Load Shedding) using PMU data. This algorithm computes Voltage Stability Margin Index(VSMI) continuously to track the voltage stability margin at local bus level. The VSMI is expressed as active and reactive power. The VSMI is used as an criterion for load shedding. In order to examine the algorithm is effective, applied to KEPCO system.

• 에너지공학
• /
• 제13권3호
• /
• pp.173-180
• /
• 2004

본 논문에서는 복합화력 발전시스템을 대상으로 한 온라인 성능감시시스템에 적용될 수 있는 열소비율 손실 분담기법을 고안하였다. 이 기법은 현재 운전조건에 대한 기대 열소비율을 계산하여 이를 실제 열소비율과 비교하고 이들의 편차, 즉 손실분을 발전시스템 구성기기(가스터빈 배열회수보일러, 증기터빈, 복수기)로 분담시킴으로써 손실이 어디에서 얼마만큼 발생하는 지를 정량적으로 감지하여 조치할 수 있는 성능관리지표로서 활용된다.