• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.775-782
• /
• 2016

In this study, elevated temperature design and integrity evaluation have been conducted using two different piping design codes for the high-temperature piping systems of sodium integral effect test loop for safety simulation and assessment(STELLA-2) being developed by KAERI(Korea Atomic Energy Research Institute). The design code of ASME B31.1 for power piping and French nuclear grade piping design guideline, RCC-MRx RD-3600 were applied, and conservatism of those codes was quantified based on the piping integrity evaluation results. The piping system of Model DHRS, Model IHTS and PSLS are to be installed in STELLA-2. The integrity evaluation results for the three piping systems according to the two design codes showed that integrity of the piping system was confirmed. As a code comparison result, ASME B31.1 was shown to be more conservative for sustained loads while RD-3600 was more conservative for thermal loads compared to B31.1.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2006

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3 m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3km upstream of the powerhouse and headrace tunnel of 20km in length and penstock of 440m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflowraised the water level inside tunnel to 70cm, 17% of tunnel diameter (3.9m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made forthe excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.124-139
• /
• 2015

Unlike other mountains in Korea, Seoul Namsan(南山), which is one of the landmarks that represent the country's capital city, is perceived as a city park. This article aims to study the process that Namsan became a park and the transformation of its place in Korean Emperor and Japanese colonial period. The serial changes in Namsan, in early modern era, mean that is associated with the colonial urbanization and the rule of space by Japan. The stages of Waeseongdae Park(倭城臺公園), Gyeongseong Park(京城公園) and Hanyang Park(漢陽公園) under the leadership of Japan, due to the extension of Japan's power, Namsan has became the park. Here, the park has become a strategic tool of other's occupying Hanseongbu(漢城府), a capital city. The process that Namsan became a park dose not mean making the space for recreation and rest, but is an excuse for using the land. Since then, Namsan's parks barely fulfilled its original function as park as it was transformed into a shrine, Gyeongseong Jinjya(京城神社), for Japanese warriors or was incurred upon by Joseon Singung(朝鮮神宮), which was established as a facility to govern Korea, sometimes is gradually and sometimes is mercilessly. The fact, transplantation of Japanese culture and replacement as ruler space, is another aspect of occupying and govern place. In other words, while the process that Namsan became a park is the way of establishing Japanese force, the transformation of its place show a colonial rule as an aspect of space. Meanwhile, in spite of transformation to shrine, Namsan became accepted as a park for a long time, because of the forest of Namsan. Japan managed forest as a sacred place. It is also a result of the Japanese rule of space.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.355-362
• /
• 2004

Fission products and Inter reaction layer of $U_3Si-Al$ dispersion fuel, irradiated in HANARO research reactor with 121 kW/m of maximum liner power and 63 at% of average burn-up, was characterization by EPMA (Electron Probe Micro Analyzer). The fuel punching system developed by Irradiated Materials Examination Facility (IMEF) has used to make these samples for the EPMA. With this system a very small and thin specimen which is 1.57 mm in diameter and 2 mm in thickness respectively has been fabricated to protect the EPMA operator from high radioactive fuel and to mini-mize the equivalent dose rate less than 150 mSv/h. EPMA was performed to observe layers of sectional, Inter-reaction and oxide with specimens of cutting and polished. Stoichiometry in the Inter-reaction layer with $16{\mu}m$ of thickness was $U_{2.84}$ Si $Al_{14}$ with calibration of $UO_2$ and $U_{3.24}$ Si $Al_{14.1}$ with calibration of standard specimen. metallic precipitates in this layer were not observed using fission products examination.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.153-163
• /
• 2020

Compared to gaeous hydrogen, liquid hydrogen has approximately 1/800 volume, 800 times higher volumetric energy density at the same pressure, and the advantage of lower explosion risk and easier transportation than gaseous hydrogen. However, hydrogen liquefaction requires larger scale facility investment than simple compression storage method. Therefore, the research on energy-saving hydrogen liquefaction processes is highly necessary. In this study, helium/neon (mole ratio 80 : 20) refrigeration cycle was investigated as the main refrigeration process for hydrogen liquefaction. Process simulation for less energy consumption were carried out using PRO/II with PROVISION V10.2 of AVEVA. For hydrogen liquefaction, energy consumption was compared in three cases: Using a helium/neon refrigerant cycle, a SMR+helium/neon refrigerant cycle, and a C3-MR+helium/neon refrigerant cycle. As a result, the total power consumptions of compressors required to liquefy 1 kg of hydrogen are 16.3, 7.03 and 6.64 kWh, respectively. Therefore, it can be deduced that energy usage is greatly reduced in the hydrogen liquefaction process when the pre-cooling is performed using the SMR process or the C3MR process, which have already been commercialized, rather than using only the helium/neon refrigeration cycle for the hydrogen liquefaction process.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1077-1088
• /
• 2019

As the cyber threats of nuclear power plants become more necessary to systematically prepare against the cyber attack, the international community and the domestic government are urged to apply proper security controls for Critical Digital Assets (CDA) through cyber security regulatory guidelines. In this study, we suggests the application of security controls to develop the regulatory requirements of the graded approach through the analysis of domestic and foreign cyber security regulation guidelines and best practices for digital assets directly related to nuclear accidents. In order to apply the regulatory requirements based on the consequence(impact of infringement) of the regulated facility, which is a basic consideration of the graded approach, we will classify two methods and describe details of each method. By reanalyzing existing security controls, it is introduced that the method of demanding digital assets directly related to accident to enhance security controls required for existing CDA or develop additional security controls and requiring minimum security controls for CDA that are not directly related to accident.

• Journal of vocational education research
• /
• v.33 no.3
• /
• pp.145-167
• /
• 2014

The purpose of this research is to prepare the measures for evaluating the job of horse-riding instructor and improvement related to it and for distributing horse-riding industry effectively. Forsuch, we tried to analyze job of horse-riding instructor. Inparticular, we have developed DACUM chart of horse-riding instructor through DACUM method and experts related to it. As result, we found out eight duties and hundreds of job and arranged seven duty areas in total and eighty-two executed works. In addition, as experts said, the horse-riding instructor is the one who 'instructs people learning horse-riding in horse-riding facility and manages horses, horse-riding equipment and man-power.' Such results provide the procedure of horse-riding instructor cultivation which has been presently underway with many viewpoints. Especially, there are three educational processes and subject materials related to horse-riding instructor's examination(Hipologia, Horse-treatment technique, Horse Health management). However, as result of analysis on duty, we found out that racecourse management and horse-riding education theory has been needed to be added and complemented as well. In addition, the work and duty of analysis can be used to be made use up of as work profile and specification and such data can be also made use of as standard of training and submission. Through this study there should be a necessary work to distinguish between re-drafting and role of duty in its own right related to certification of horse-riding instructor in future and it would be necessary to develop study that is able to connect them all to certificate. What is more, there should be work and measure required for rethinking of utility of certification.

• Clean Technology
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2018

In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.195-209
• /
• 2012

There are four differentiated levels to quantify the amount of greenhouse gas emissions from a facility, which are Tier 1 to 4 based on the IPCC guidelines. In this study, the emission estimates from all tier levels were calculated to compare their total $CO_2$ emission results among themselves for seven facilities, including three sectors of electricity generation, municipal solid waste incineration, and cement manufacturing for three months between February and May 2011. Generally the measured $CO_2$ emissions by Tier 4 were higher than the calculated $CO_2$ emissions by Tier 3, which had been also observed for the power plants in the USA. It was found out that to obtain more reliable estimation for Tier 3, accurate analysis of the composition of the fuel used should be carried out. It was suggested that further refinement on the administrative guidelines be made to make it more robust.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.4-19
• /
• 2009

Though admitting that, in light of the recent archaeological trend, the excavation on relics of Sam-gama (a sort of kiln steaming the hemp) is increasingly reported, little efforts by far have been made not only to restore its traditional structure design but also to research hardly the change of hemp-steaming technologies in ages. In this regard, this paper shows the exploration of structural method and design as well as operability with regard to Sam-gut, traditional hemp-processing equipment that was recently reconstructed in Jungsun, Kangwon Province. Samgut, generally positioned at the waterside area, is an traditional device for steaming hemp to get bast fibers from the raw material of hemp, principally consisting of HWA-JIP(fire-place) to obtain steams by feeding fire ad Mong-got(boiling chamber) to make the hemp steamed after stacking. More specifically, thick round-logs were piled at the bottom of Hwajip prior to stacking stones around its circumferential area. When the timber positioned below gets burned with high temperature to heat stones existing in the upper side, waters then poured onto it after laying a bundle of grass and soil up to the boiled stones. If so, there generates hot vapor, which is conveyed to Monggot to steam the hemp. Functionally, it is of outstanding importance that Samgut is capable of producing high-temperature water vapors instantaneously under the intensive manpower, thus being constructed achievable for those purposes. The Samgut made by digging the ground is an instant facility that is closed after use. The remains, which were used to generate higher thermal power for steaming hemp, make it hard to excavate the historic traits because there left little vestiges in the soil, which means keen attention must be paid to find out the trace of Smgama relics. Future research stall be focused on collection of broader data regarding Samgut including technological review in extracting bas fibers from the hemp.