• 전기의세계
• /
• v.24 no.4
• /
• pp.63-70
• /
• 1975

The speed characteristics of the diesel engines driving alternators are very important because it is directly concerned to the quality of electric power especially when electric power is supplied by a single alternator. In this paper, the speed characteristics of th diesel engine, equipped with a centrifugal mechanical governor, driving an alternator is dealt when load changes stepwise. The all coefficients included in the block diagram of the speed control system are estimated by actual experiments and the effects of gain change of the governor in the speed characteristics are examined theoretically and experimentally. The obtained result seems to be satisfactory and very useful for the improvement of quality of electric power supplied by a single alternator driven by the diesel engine especially for electric power system of ships.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.87-96
• /
• 1993

Because of the complexity, nonlinearity and long-time delay of power plant, the star-up operation of a fossil power plant is very difficult to automate. So the start-up operation is always carried out by the skilled human operators, who utilize their knowledges and experiences for the predesigned start-up schedules and procedures. In this paper, a fuzzy logic controller is designed for the start-up operation of the power plant. And the operators experiences are modeled in terms of fuzzy sets and variables. To validate the controller, a drum-type boiler of the Seoul Power Plant is constructed via the signal flow diagram. Using the model, the suggested automatic start-up operation is verified, and the results are also presented.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.90-94
• /
• 1998

한국전력공사 전력연구원은 10년간의 시뮬레이터 개발 경험을 바탕으로 Windows(NT)환경의 시뮬레이터 개발 툴인 Powersim을 독자적으로 개발하고 이를 이용하여 화력발전소 DCS(Distributed Control System) 검증용 시뮬레이터를 개발하고 있다. PowerSim은 GMB(Graphic Model Builder)를 갖춘 국내 최초의 시뮬레이터 개발툴로 다양한 발전소 기기모델과 강사조작반기능을 갖추고 있다. PowerSim은 완벽한 GUI (Graphic User Interface)환경을 지원하여 User가 Icon Drag 방식으로 시뮬레이션 도면(SimDiagram)을 그리면 그래픽 에디터에서 출력된 각종 기기의 접속상태를 나타내는 Netlist를 변환기가 처리하여 기기의 연결상태를 정규화하고 Scheduler는 기기모델(일종의 Subroutine)을 Netlist에 맞게 Scheduling하여 Executive에서 실행 가능한 형태로 만드는 모든 과정이 자동화되어 있다. 따라서, 개발자는 발전소 P&ID(Pipe and Instrument Drawing)에 기초하여 Simdiagram을 그리고 발전소 데이터를 입력하는 것만으로 실시간 시뮬레이터를 구현할 수 있다. 본 논문에서는 PowerSim의 개요와 GMB(Graphic Model Builder) 및 강사조작반에 적용된 GUI 환경과 실시간 Executive에 대해 다룬다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.3
• /
• pp.23-31
• /
• 2009

Counter shaft transmission is a popular automatic transmission power train in construction vehicles such as wheel loader and forklift. The gear train layout of counter shaft transmission is a very basic and important development stage because it affects the most of components design including hydraulic system and shift control algorithm, etc. This paper presents a design methodology for the gear train layout from the analysis of power flow path and clutch hook-up of the existing counter shaft transmission that is adopted in commercialized construction vehicles. Also, independent constraints for the meshed gear ratios are derived in order to realize forward 4-speed and reverse 3-speed gear ratio. The layout design principle proposed here was applied to the new original counter shaft transmission that is underdevelopment.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.30-40
• /
• 2015

For a shunt power quality controller (SPQC) the DC side voltage value which is closely related to the compensation performance is a significant parameter. Buy so far, very little discussion has been conducted on this in a quantitative manner by previous publications. In this paper, a method to design the DC side voltage of SPQC is presented according to the compensation performance in the single-phase system and the three-phase system respectively. First, for the reactive current and the harmonic current compensation, a required minimal value of the DC side voltage with a zero total harmonic distortion (THD) of the source current and a unit power factor is obtained for a typical load, through the equivalent circuit analysis and the Fourier Transform analytical expressions. Second, when the DC side voltage of SPQC is lower than the above-obtained minimal value, the quantitative relationship between the DC side voltage and the THD after compensation is also elaborated using the curve diagram. Hardware experimental results verify the design method.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.376-385
• /
• 2009

Increasing the importance of Green IT brings low-power consumption requirements for embedded software into relief. This paper focus on the power analysis techniques of embedded software along with the trend. We survey the existing research on the power analysis techniques performed during the last decade, and find out some features or characteristics from the analysis approaches of those techniques. Also we summarize those characteristics into a systematic model, and then apply the model to embedded software development process using spider diagram. Our suggestion gives such benefits as improving the understanding of power analysis techniques, guiding the choice of an appropriate technique to their Power analysis, and forecasting the direction of technology changes in embedded software power analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.362-368
• /
• 2008

The purpose of this is providing employees who take charge of operation and maintenance at power plant with education contents that can be used for self-studying and on the job training through their computers. We developed the education contents for making actually application possible using this piping and instrument diagram(P&ID), operation and maintenance procedure, unit specification and material of 500MW thermal power plant those include unit equipment 3-dimension animation, character and narration performance considering making teaching plan, flexibility, extension, reuse, maintenance and focusing on user. Specially, we developed the flash type education contents about power plant operation based on the plant 3-dimension animation and the spot real picture concerned about new generation trend for power plant incoming employees actual knowledge. in addition, this contents apparently contributed to improve the level of employees technical power as distributed to employees.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.655-664
• /
• 2019

In order to analyze the nonlinear phenomena of the bifurcation and chaos caused by the switching of nonlinear switching devices in inductively coupled power transfer (ICPT) systems, a Jacobian matrix model, based on discrete mapping numerical modeling, is established to judge the system stability of the periodic closed orbit and to study the nonlinear behavior of Hopf bifurcation in a system under full resonance. The general flow of the parameter design, based on the stability principle for ICPT systems, is proposed to avoid the chaos and bifurcation phenomena caused by unreasonable parameter selection. Firstly, based on the state equation of SS-type compensation, a three-dimensional bifurcation diagram with the coupling coefficient as the bifurcation parameter is established with a numerical simulation to observe the nonlinear phenomena in the system. Then Filippov's method based on a Jacobian matrix model is adopted to deduce the boundary of stable operation and to judge the type of the bifurcation in the system. Then the general flow of the parameter design based on the stability principle for ICPT systems is proposed through the above analysis to realize stable operation under the conditions of weak coupling. Finally, an experimental platform is built to confirm the correctness of the numerical simulation and modeling.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.123-130
• /
• 2006

Airport facility is infrastructure that become external credit worthiness and linear measure of country competitive power. Among them, an airport electric power receiving and distribution facility is very important. In this paper, sorted domestic airline as 4 grades by code to accomplish standardization for airport electric power receiving and distribution facility. And established define and coverage about electric power receiving and distribution facility. And then analyze problem of existing airport and presents standardization. Finally, present standard single-line diagram by airport grade and system grade standard of airport electric power receiving and distribution facility