• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.231-234
• /
• 1997

This paper presents improved direct method for calculating the closest saddle node bifurcation (CSNB) point, which is also applicable to the selection of appropriate load shedding, reactive power compensation point detection. The proposed method reduced dimension of nonlinear equation compared with that of Dobson's direct method. The improved direct method, utilizing Newton Iterative method converges very quickly. But it diverges if the initial guess is not very close to CSNB. So the direct method is performed with the initial values obtained by carrying out the iterative method twice, which is considered most efficient at this time. Since sparsity techniques can be employed, this method is a good choice to a large scale system on-line application. Proposed method has been tested for 5-bus, New England 30-bus system.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.183-184
• /
• 1998

Respiration monitoring is important in many clinical situations due to its relationship to vitality. But present commercial monitoring systems are bulky and expensive, so they are inadequate to be used for long term recording or out-patients application. We have developed a low cost, low power, handhold respiration monitoring system based on airflow measurement. Respiration flow is indirectly detected using a thermister or a themocouple sensor. Real time recording of respiration rate, abnormality detection and apnea alarming are available.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.464-467
• /
• 1997

In this study, ECG was recorded during sleep patients with obstructive sleep apnea. We detecte(heart rate variability) signal from the ECG wa QRS detection algorithm. And we observed HRV by the power spectrum density using autoregr modeling. The experimental results were analysis sleep stage 1, sleep stage 2, sleep stage 3, sleep s sleep stage REM. In experimental result, the PSD with obstructive sleep apnea patients was distributed low frequency band except sleep step 4. These effect means that the sympathetic nervous system affected the sleep stage 1, 2, REM and the parasympathetic nervous system affected the sleep stage 3, 4 with obstructive sleep apnea patients.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.149-156
• /
• 2017

Various kinds of accessories(e.g., clock, radio, automatic door locks, alarm devices, etc.) or unit components (e.g., black box, navigation system, alarm, private audio, etc.) require dark current even when the vehicle power is turned off. However, accessories or unit components can be the causes of excessive dark current generation. It results in battery discharge and the vehicle's failure to start. Therefore, immediate detection of abnormal dark current and response are very important for a successful repair job. In this paper, we can increase the maintenance efficiency by presenting a standardized diagnostic process for the measurement of the dark current and the existing problem. As a result of the absence of a system to block the dark current in a vehicle, diagnosis and repair were performed immediately by using a standardized dark current diagnostic process.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권5호
• /
• pp.231-237
• /
• 2005

Many conventional multi-level inverters have detected switching faults by using the over voltage and current. However, fault detection of the switching elements is very difficult because the voltage and current due to each switching fault decrease more than the normal operation. Moreover, the dc-link unbalancing voltage causes a serious problem in the safety and reliability of system when the 3-level inverter faults occur Therefore, this paper proposes the simple fault diagnose method and the neutral-point-voltage control method that can protect the 3-level inverter system from the unbalancing voltage of the do-link capacitors when the faults of switching elements occur in the 3-level inverter that is very efficient in ac motor drives of the high voltage and high power applications. Through experiment results, the validity of the proposed method is demonstrated.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2594-2600
• /
• 2020

A gamma camera system using radionuclide has a functional imaging technique and is frequently used in the field of nuclear medicine. In the gamma camera, it is extremely important to improve the image quality to ensure accurate detection of diseases. In this study, we designed a blind-deconvolution framework after a noise-reduction algorithm based on a non-local mean, which has been shown to outperform conventional methodologies with regard to the gamma camera system. For this purpose, we performed a simulation using the Monte Carlo method and conducted an experiment. The image performance was evaluated by visual assessment and according to the intensity profile, and a quantitative evaluation using a normalized noise-power spectrum was performed on the acquired image and the blind-deconvolution image after noise reduction. The result indicates an improvement in image performance for gamma camera images when our proposed algorithm is used.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.56-61
• /
• 2010

Simulator is a development equipment which enables the ECU to operate in normal mode by simulating the interface signal between ECU and mechanical system electrically. Embedded simulator means simulation function is embedded in ECU firmware, hence the electrical signal interface is replaced by the substitution of information at system program level. This paper explains the development of embedded transmission simulator for the verification of TCU firmware function which covers shifting control and on-board diagnosis. The embedded simulation program is executed in TCU processor along with the TCU firmware and it provides TCU firmware with not only the speed information those are appropriate both in driving and shifting conditions, but also the fault detection signals. Experimental results show that the validity of embedded simulator and its usefulness to the TCU firmware development and verification.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.176-180
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers is designed, which has been installed inside the oil tank of transformer in a substation by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.56-59
• /
• 2008

We have designed 4 types(void in insulation paper, protrusion electrode, floating electrode, surface discharge) of partial discharge(PD) defect to simulate typical faults found in oil filled power transformers. Ultra-high frequency(UHF) radiation due to PD was measured using a UHF measuring system and a conventional PD measuring system, simultaneously. Electromagnetic radiation spectra of these defects show UHF radiation up to about 1.5-2 GHz range. The phase resolved partial discharge(PRPD) patterns of UHF radiation from the PD defects were also measured and the pattern reveals distinct feature for each defect types. The UHF measuring could be used to detect PDs in oil filled transformers and analysis of the PRPD pattern should provide useful information on origin of PD signal.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.449-450
• /
• 2013

본 논문에서는 이산 웨이블릿 변환(DWT;discrete wavelet transform)을 이용한 에너지 저장시스템(ESS;energy storage system)의 고장 검출 방법을 제안한다. ESS에 순간적인 고장 발생시 전압의 급격한 변화가 발생할 수 있으며 이는 다해상도 분석(MRA;multi-resolution analysis)을 이용한 시간-주파수 분석을 통해 분해된 저주파 전압 성분(approximation;$A_n$)과 고주파 전압 성분(detail;$D_n$)중 현저한 성분의 변화가 관찰되는 고주파 전압 성분을 선택한다. 이를 검증하기 위하여 모든 고주파 전압 성분의 절대값을 적용한 뒤 최대값 정보를 추출한다. 이 때, 추출된 각 성분의 최대값과 최대값의 평균을 비교하되 여러 사전실험을 통해 정해진 특정 임계값 대비 큰 값을 나타낼 때 고장이 발생하였음을 판단한다.