• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1990년도 추계학술발표회논문집
• /
• pp.41-46
• /
• 1990

This paper shows the characteristics of sparkover discharge in flowing air ranging from O(Reynolds number, Re to 10.52$\times$104(Re). Also, we investigated changes of dis-charge pattern for constant input power by adjustment of the Re. The important results obtained from this paper are as followers. The maxinum sparkover voltage of flowing air are about 6.3[kV] higher than those of static air. The discharge pattern can be controlled by adjustment of the Re.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.853-864
• /
• 2002

In the analysis of categorical data subject to misclassification errors, the observed cell proportions are adjusted by a misclassification probabilities and estimates of variances are adjusted accordingly. In this case, it is important to determine the extent to which misclassification probabilities are homogeneous within a population. This paper considers methods to evaluate the power of chi-squared tests for homogeneity with complex survey data subject to misclassification errors. Two cases are considered: adjustment with homogeneous misclassification probabilities; adjustment with heterogeneous misclassification probabilities. To estimate misclassification probabilities, logistic regression method is considered.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.357-362
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. This paper proposes a new technique of fringe adjustment by adopting a sinusoidal amplitude-modulated iterative filter convolved with an interference fringe pattern in the joint power spectrum (JPS) domain. The comparison of our new technique and other techniques is presented to show that the newly proposed technique can successfully improve both the correlation peaks and the peak signal-to-noise ratio (PSNR). Simulated results of enhanced interference fringes are also presented.

• 지역사회간호학회지
• /
• 제29권4호
• /
• pp.488-498
• /
• 2018

Purpose: This study was conducted to identify the influence of trauma experiences and social adjustment on health-related quality of life in North Korean defectors. Methods: The subjects were 117 North Korean defectors living in B and Y city. The data were collected from September 1 to September 20, 2014, and analyzed by the SPSS/WIN 18.0 program. Results: Significant differences were found in the health-related quality of life with respect to the subjects' education, marriage status, types of dwelling, family types, duration of residence in South Korea, jobs in South Korea and in North Korea, families left in North Korea or other surrounding countries, and subjective health status. Health-related quality of life is negatively related to trauma experiences during escape from North Korea and during their life in South Korea. Health-related quality of life positively is related to social adjustment. The meaningful variables which influenced the subjects'health-related quality include social adjustment, job in South Korea, job in North Korea, current family structure, and trauma experiences in South Korea. Total explanatory power of these factors for health-related quality in North Korean Defectors is 43.0% and social adjustment is the most influential factor. Conclusion: Therefore, in order to enhance health-related quality of life in North Korean defectors, it is necessary for them to increase social adjustment and decrease trauma experiences. In addition, methods are needed to provide job opportunities, better education and family services for North Korean defectors.

• 대한치위생과학회지
• /
• 제6권2호
• /
• pp.161-172
• /
• 2023

연구배경: 치위생과 학생들의 자아인식과 타인인식, 대학생활 적응 정도를 알아보고 대학생활 적응에 미치는 요인을 파악하고자 한다. 연구방법: 치위생과 재학생 191명을 대상으로 설문조사에 동의를 구하고 G*power 3.1.9.4 program으로 효과 크기를 산출하였다. 일반적 특성에 따른 자기인식, 타인인식, 대학생활적응의 차이와 상관관계 및 대학생활 적응에 영향요인을 알아보기 위해 독립 표본 t-test 및 일원 배치 분산분석, 사후분석 scheffe, 상관분석과 다중회귀분석을 실시하였다. 연구결과: 대학생활 적응은 자기인식(r=.301)에서 유의한 정(+)의 상관관계가 나타났고, 하위 요인과의 관련성은 사회적 적응과 사적 자기인식(r=.340), 공적 자기인식(r=.331)에서 가장 높은 정(+)의 상관관계가 나타났다(p<0.01). 타인인식(r=-.051)은 대학생활 적응과 부(-)의 관련성을 보였으나 통계적으로 유의한 차이는 나타나지 않았다. 대학생활 적응 요인으로는 사적 자기인식(β=.232)과 공적 자기인식(β=.254)이 정(+)의 영향을 주었고, 내적 타인인식(β=-.205)이 부(-)의 영향을 주는 것으로 나타났다(p<0.01) 결론: 치위생과 학생들의 자기인식과 타인인식은 원만한 대학생활 적응에 영향요인으로 대학 생활의 적응력과 전공 직무와 연계한 핵심 역량 배양을 위해 향상 방안이 고려되어야 할 것이다.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.80-92
• /
• 1997

This research focuses onan efficient control method of temperature for multiple points using only one processor. For a yarn production system, the surface temperature control of heaters are very important for quality control. Therefore, we designed a temperature controller for a draw and twist machine and applied Fuzzy-PWM algorithm to the controller. If we use a processor for the temperature control of multiple points with the conventional ON/OFF control, the control performance of the system becomes poor. To overcome these problems, we developed a new Fuzzy-PWM algorithm for the adjustment of power rate to the heaters in the conventional ON/OFF control. It is shown that this algorithm has the same effects as the PID algorithm for the temperature control of each point. The proposed algorithm is robust against the production condition and environment such as the reference temperature and the thickness of yarn, since the power rate to the heater is adjusted by Fuzzy Rules derived from the values of the reference termperatureand the thickness of yarn. To obtain optimal Fuzzy rulees, the control simulations are perfodrmed through the modelling of the heater and simulation of Fuzzy rules. This algorithm is applied for the multiple pont temperature controller and showed satisfactory performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2173-2181
• /
• 2016

Permanent magnet synchronous motors (PMSMs) have higher torque and superior output power per volume than other types of AC motors. They are commonly used for applications that require a large output power and a wide range of speed. For precise control of PMSMs, knowing the accurate position of the rotor is essential, and normally position sensors such as a resolver or an encoder are employed. On the other hand, the position sensors make the driving system expensive and unstable if the attached sensor malfunctions. Therefore, sensorless algorithms are widely researched nowadays, to reduce the cost and cope with sensor failure. This paper proposes a sensorless algorithm that can be applied to a wide range of speed. The proposed method features a robust operation at low-speed as well as high-speed ranges by employing a gain adjustment scheme and intermittent voltage pulse injection method. In the proposed scheme the position estimation gain is tuned by a closed loop manner to have stable operation in tough driving environment. The proposed algorithm is fully verified by various experiments done with a 1 kW outer rotor-type PMSM.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.30-39
• /
• 2002

본 논문에서는 전력동요 억제를 위한 TCSC의 강인한 LQG/LTR (Linear Quadratic Gaussian with Loop Transfer Recovery) 제어기 설계에 관한 연구를 하였다. LQG/LTR 제어기를 설계할 때 성능을 극대화하기 위해서는 여러 단계의 파라미터 조정을 하여야 한다. 이에 본 논문에서는 다 변수 LQG/LTR 안정화 제어기 선계를 체계적으로 할 수 있는 방법을 제안하였다. 설계된 제어기를 실제의 비선형 전력시스템에 적용함으로써 전력동요억제 효과를 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.171-174
• /
• 1998

The development of the high-frequency induction-heating for 2700kW power range intend to make localization at forging and rolling mill part by technical innovation. And, the development makes to increase our's competitive power at technique, quality and cost. This paper describes the heart of high-frequency induction-heating technique, switching technique, a few problem in common using as an unsatisfied technique, load adjustment technique, system control, diagnostic system, and auto-interface etc.