• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1139-1143
• /
• 2002

Analysis of lysophosphatidic acids (LPAs) is of clinical importance as they can serve a potential marker for ovarian and other gynecological cancers and obesity. It is critically important to develop a highly sensitive and specific method for the early detection of gynecological cancers to improve the overall outcome of this disease. We have established a novel quantification method of LPAs in human plasma by negative ionization tandem mass spectrometry (MS-MS) using multiple reaction monitoring (MRM) mode without the conventional TLC step. Protein-bound lipids, LPAs in plasma were extracted with methanol : chloroform (2:1) containing LPA C14:0 as an internal standard under acidic condition. Following back extraction with chloroform and water, the centrifuged lower phase was evaporated and reconstituted in methanol. The reconstituted solution was directly injected into electrospray source of MS/MS. For MRM mode, Q1 ions selected were m/z 409, 433, 435, 437 and 457 which corresponds to molecular mass [M-H]- of C16:0, C18:2, C18:1, C18:0 and C20:4 LPA, respectively. Q2 ions selected for MRM were m/z 79, phosphoryl product. Using MS/MS with MRM mode, all the species of LPAs were completely separated from plasma matrix without severe interferences. This method allowed simultaneous detection and quantification of different species of LPAs in a plasma over a linear dynamic range of 0.01-25 ㎛olL-1 . The detection limit of the method was 0.3 pmol/mL, with a correlation coefficient of 0.9983 in most LPAs analyzed. When applied to the plasmas of normal and gynecological cancer patients, this new method differentiated two different groups by way of total LPA level.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.

• International Journal of Oral Biology
• /
• v.36 no.3
• /
• pp.123-128
• /
• 2011

The notion that dental amalgam is a potential source of mercury exposure remains a controversial issue. However, there are few epidemiological analyses that have addressed whether this occurs in children. We aimed in our current study to identify the relationship between dental amalgam filling surfaces and the blood mercury levels in a cohort of 711 South Korean children aged between 8-9 years. Oral examinations were conducted to detect the number of amalgam filling surfaces on the teeth of these individuals. Blood samples were also taken from these children to assess the levels of mercury accumulation in the body. The amalgam filling surfaces were classified into four groups based on their number: 0 (n = 368), 1-5 (n = 219), 6-10 (n = 89), and 11+ (n = 35). The blood mercury levels in the children with more than 10 amalgam surfaces was 0.47 ${\mu}g$/L higher on average than those with no amalgam surfaces after adjusting for the frequency of fish or seafood consumption, age, and gender (P < 0.05). We found from our data that a higher number of dental amalgam fillings correlated with a higher blood mercury level in Korean children. Further studies are needed to investigate whether these elevated mercury levels exert neurotoxic or nephrotoxic effects.

• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.73-82
• /
• 1993

To investigate the changes in aerobic and facultative anaerobic oral microflora during remission-induction chemotherapy in patients with acute myeloid leukemia, 10 consecutive patients were studied during a period of 28 days. One day before, during and after the induction therapy, patients were given 10% Betadine solution for mouthrinses after breakfast and kept from eating and drinking. After 3 hours, paraffin-stimulated whole saliva was obtained for 2 minutes and transported to the laboratory. The samples were dispersed and homogenized by use of vortex mixer for 20 seconds. From these samples 10-fold serial dilutions (from 10-1 through 10-3) were prepared. Each dilution of 0.1 ml was plated on duplicate set of one nonselective medium (Blood agar) and four selective media (Sabourauds dextrose agar, Mannitol salt agar, Mac-Conkey agar, SF medium ) using applicator woods. All agar plate were incubated at 37$^{\circ}C$ for 48 hours. The total number of microorganisms was calculated and the percentage distribution of the various microorganisms from each specimen was drawn. 1. The salivary flow rate decreased by 66%, going from 5.38 ml/2min to 1.81 ml/2min over two days during the chemotherapy. 2. The total number of microorganisms in saliva increased by 22%, going from 4.88$\times$105/ml to 6.00$\times$105/ml over two days during the chemotherapy. 3. The salivary flow rate and the total number of microorganisms in saliva were recovered within 28 days after the chemotherapy. 4. The quantitative alteration in oral Enterobacteria, Enterococci, Staphylococci, Cndida during the chemotherapy had no statistical significance. 5. In saliva of the patients with acute myeloid leukemia who ahd intraoral ulcer, Enterobacteria was quantitatively predominent. Our study suggests that chemotherapy-induced transient xerostomia may induce acute oral infection. Consequently, the use of saliva substitute, the removal of intraoral infection source and the consistent oral hygiene care seem to be required to avoid the transmission of potential pathogenes in this group of patients.

• Preventive Nutrition and Food Science
• /
• v.13 no.2
• /
• pp.90-94
• /
• 2008

The protective effect of chungkukjang from Sunchang province against oxidative stress was evaluated in the cellular system using LLC-$PK_1$ renal epithelial cells. The LLC-$PK_1$ cells showed decrease in cell viability and elevation in lipid peroxidation by the treatment with the generators of nitric oxide (NO) and superoxide anion ($O_2^-$) produced by sodium nitrouprusside and pyrogallol, respectively. However, the methanol extract of chungkukjang significantly inhibited cellular loss and lipid peroxidation in a dose-dependent manner; in particular K chungkukjang (KC) exerted the strongest protective effect. In addition, the protective effect of chungkukjang from 3-morpholinosydnonimine, as a source of peroxynitrite, with simultaneous generations of NO and $O_2^-$, was also studied. Treatment with chungkukjangs significantly preserved the cell viability and inhibited lipid peroxidation caused by SIN-1 with dose-dependence. The present study suggests that chungkukjang from Sunchang province, especially KC, would have protective potential from oxidative stress induced by free radicals under cellular oxidative damage.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.55.1-55.1
• /
• 2016

Near Earth Asteroid (NEA) population has attracted keen attention not only from the scientific community but from the general public ever since their terrestrial impact risk achieved wide recognition. Potentially Hazardous Asteroids (PHAs), the subset of NEAs, recently became the center of interest of planetary defense folks and mining industry due to their proximity to, and the potential effects on planet Earth. However, we have long been ignorant about either the physical properties or dynamical source regions of individual objects. For instance, their rotational periods are only known for five percent of the total population (The NEA Database of DLR, updated on Feb 2016). The primary scientific objective of DEEP-South (DEep Ecliptic Patrol of the Southern sky) is to physically characterize 70 percent of km-class PHAs until 2019. In order to achieve this goal, we implemented an observation mode so-called "OC (Opposition Census)" targeting objects around opposition. OC observations were conducted during the period between Feb 2015 and Mar 2016, at CTIO in early periods, and at three KMTNet stations (CTIO, SSO and SAAO) since late July 2015, excluding the "bulge season" when the telescope time is exclusively used for exoplanet search. We present the preliminary lightcurves of 66 PHAs and 59 NEAs that we obtained during the OC runs.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.205-211
• /
• 2010

Effects of operating parameters on electrical properties and ozone generation of Plasma Gun for ballast water treatment were investigated in a laboratory scale experiment. Electrical discharges and ozone generation initiated with applying voltages higher than discharge onset value. Ozone concentration was almost linearly increased with the increase of applied voltage. The optimum electrode gap distance which gave the optimum energy efficiency of ozone generation was 1.95 mm in the experimented apparatus. The effect of inner electrode material on the electrical energy transfer was negligible, however, the difference of electrical and thermal conductivities between electrode materials significantly influenced the ozone generation. In a constant geometrical structure, the electrical energy density played an important role in the ozone generation. The increase of oxygen content in the feeding gas enhanced the ozone generation by lowering ionization potential and promoting ozone source.

• Clean Technology
• /
• v.2 no.2
• /
• pp.51-59
• /
• 1996

Billions of tons of industrial waste are generated annually in industrialized countries. Managing and legally disposing of these wastes costs tens to hundreds of billions of dollars each year, and these costs have been increasing rapidly. The escalation is likely to continue as emission standards become even more stringent around the world. In the face of these rapidly rising costs and rapidly increasing performance standards, traditional end-of-pipe approaches to waste management have become less attractive. The most economical waste management alternatives in many cases have become recycling of the waste or the redesign of chemical processes and products so that wastes are prevented or put to productive use. These strategies of recycling or reducing waste at the source have collectively come to be known as pollution prevention. The engineering challenges associated with pollution prevention are substantial. This presentation will categorize the challenges in three levels. At the most macroscopic level, the flow of materials in our industrial economy, from natural resource extraction to consumer product disposal, can be redesigned. Currently, most of our raw materials are virgin natural resources that are used once, then discarded. Studies in what has come to be called industrial ecology examine the material efficiency of large-scale industrial systems and attempt to improve that efficiency. A second level of engineering challenges is found at the scale of individual industrial facilities, where chemical processes and products can be redesigned so that waste is reduced. Finally, on a molecular level, chemical synthesis pathways, combustion reaction pathways, and other material fabrication procedures can be redesigned to reduce emissions of pollution and unwanted by-products. All of these design activities, shown in Figure 1, have the potential to prevent pollution. All involve the tools of engineering, and in particular, chemical engineering.

• CELLMED
• /
• v.2 no.2
• /
• pp.20.1-20.5
• /
• 2012

$Gynura$ $segetum$ (Lour.) Merr. ($Compositae$) is a well recognized medicinal plant in Indonesia and Malaysia. It is believed to have an anticoagulant effect and is used in treating snake-bites, inflammations and other skin afflictions. This study was carried out to evaluate the antimicrobial effects of $Gynura$ $segetum$ leaves extracts and its fractions. The chemical compositions of the active extracts were also determined. The antimicrobial activities of different solvent extracts of leaves of $Gynura$ $segetum$ were evaluated using the agar well-diffusion method. The Minimum Inhibitory Concentration (MIC) of the active subfractions was determined by the tube dilution method. Gas Chromatography-mass spectrometry (GC-MS) analysis was carried out to identify the chemical compositions of the active extracts. The ethyl acetate fraction and its subfraction E4 performed potent antimicrobial activities and fifteen known chemical constituents were identified by GCMS analysis as 4-vinylphenol, 1-tetradecene, phenol, 2,4-bis(1,1-dimethylethyl), 1-hexadecene, E-15-heptadecenal, hexadecanoic acid, 1,2-benzenedicarboxylic acid, dibutyl ester, 1-docosene, octadecanoic acid, 1-eicosene, cyclotetracosane, 1,2-benzenedicarboxylic acid, bis(2-ethylhexyl)ester, butanedioic acid, monomethyl ester, niacin and 4-hydroxy-benzoic acid. The results of this study suggested a connection between the antimicrobial activities and the chemical structures. The plant may be used as a potential source for antimicrobial agents.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.145-152
• /
• 1989

Volume phase diffraction grating is formed in 5${mu}m$ Agfa 8E75 photographic emulsion film using He-Ne laser. It is dependent on the chemical processing rather than materials themselves that high diffraction efficiency can obtained in silver halide emulsions. With potassium dichromate bleach and alcohol drying, overall efficiency of 71% (81% after allowing for reflection at the two surfaces) has been achieved at an exposure of 180${mu}J/cm^2.$ Dichromate cross-linkage and air void by rapid dehydration increase refractive index modulation depth. The grating is swollen, which is newly identified by Scanning Electronic Microscope(SEM) photography, and it causes on-Bragg at larger angle than the recording angle. It is pointed out that controlling the emulsion thickness has an important role as a potential source for high diffraction efficiency.