• Journal of the Korean institute of surface engineering
• /
• v.30 no.4
• /
• pp.262-271
• /
• 1997

Nickel-matal hydride(Ni-MH) batteries are receiving attention as non-pollunting. high performance rehargeable energy stoage system. The performance of Ni-Mh is significantly influenced by the hydrogen storage alloy materiels used as an anode material. Recently, having discharge capacities higher than the $AB_5$-type hydrogen storage alloys, the Zr-based $AB_2$-Type hydrogen storage alloys has remaining problems regarding cycle life and self-dischareg. These problems need to be solved by improvements in the alloy design and/or surface treatment. This work investiggates the effects the effects of surface property by fluorination on $Zr_{0.7}Ti_{0.3}V_{0.4}Mn_{0.4}Ni{1.2}$ composittion $AB_2$-Type hydrogen storage alloys. EPMA, SEM and AES techniques were used for surface analysis, and the crystal structure was characterized by constant current cycling test and potential sweep methods. Fluorination was found to be effective when La-was incorporated into the alloy, and has unique morphology, higher reactivity, and at the same time formed a protective film. Through, fluorination, the cycle life of an electrode was found to increase significantly, charge/discharge characteristics of the electrode the potential difference between the charge/discharge plateau, i.e polarization(overpotential)were improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.371-374
• /
• 2000

The electrochemical properties of LiM $n_2$ $O_4$as a cathode and an anode for the lithium secondary battery were evaluated. When LiM $n_2$ $O_4$ material was used as the cathode with the current collector of aluminum, the 1st specific capacity and the 1st Ah efficiency in LiM $n_2$ $O_4$/lithium cell were 123 mAh/g and 91.7%, respectively The anodic properties of LiM $n_2$ $O_4$ material was also evaluated in the LiM $n_2$ $O_4$/1ithium cell with the current collector of copper. It showed that the LiM $n_2$ $O_4$ was useful as the anode for the lithium secondary battery. During the 1st discharge, a potential plateau was observed at the potential of 0.3 $V_{Li}$ Li+/. The 1st specific charge capacity and the 1st specific discharge capacity were 790 mAh/s and 362 mAh/g, respectively. Therefore, the 1st Ah efficiency was 46%. The discharge capacity was gradually faded with the charge-discharge cycling to about 50th cycles. Thereafter, the discharge capacity was stabilized to about 110 mAh/g.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.399-409
• /
• 2009

Many researches have shown that NDVI provides a potential methods to derive meaningful metrics that describe ecosystem functions. In this paper we investigated the use of the MODIS NDVI (Normalized Difference Vegetation Index) to monitor vegetation phenology dynamics of Northern plateau region, North Korea, during last 9-years (2000~2008). The findings of this paper can be summarized as follows. First, the length of growing season ranged from a low of 128 days in 2003 to a high of 176 days in 2000 and 2005. On the average of the last 9 years, the highest NDVI of 0.86 was marked on 28 July. Greenup onset occurs at the start of May, while the senescence begins between late September and October. Second, these annual vegetation cycles were compared with Seorak and Jiri Mountain regions of South Korea which have similar vegetation condition. Greenup onsets in South Korea were observed earlier than those of North Korea and the average time lag between the South and North Korea in Greenup was about 16 days which is a time-resolution of remotely sensed data. Sub-alpine conifers of such areas may be severely affected by the large of phenological characteristics due to the global warming trend.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.995-1001
• /
• 1998

As a basic study for cathode materials of {{{{ { {LiMn }_{2 }O }_{4 } }}-based lithium-ion secondary batteries Li({{{{ { { { {Mn }_{1-$\delta$ }Nb }_{$\delta$} )}_{2 }O }_{4 } }} ($\delta$=0.05, 0.1, 0.2) materials which Nb is substituted for Mn were synthesized by the solid state reaction at 80$0^{\circ}C$ and 110$0^{\circ}C$ respectively. The second phase {{{{ { LiNbO}_{3 } }} appeared above $\delta$=0.1 As the result of im-pedance analysis as the amount of substituted Nb increased the resistivity of grain boundary increased greatly. Compared to undoped-{{{{ { {LiMn }_{2 }O }_{4 } }} the electrical conductivity of Li({{{{ { { { {Mn }_{1-$\delta$ }Nb }_{$\delta$} )}_{2 }O }_{4 } }} decreased slightly but is charging capacity and potential plateau increased.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.412-417
• /
• 2003

Using a galvanostatic charge/discharge cycler and cyclic voltammetry, we investigated for the first time the electrochemical properties of iron-containing minerals, such as chalcophanite, diadochite, schwertmannite, laihuite, and tinticite, as electrode materials for lithium secondary batteries. Lithium insertion into the mineral diadochite showed a first discharge capacity of about 126 mAh/g at an average voltage of 3.0 V vs. $Li/Li^+$, accompanied by a reversible capacity of 110 mAh/g at the 60th cycle. When the cutoff potential was down to 1.25 V, the iron was further reduced, giving rise to a new plateau at 1.3 V. Although the others showed discharge plateaus at low potentials of less than 1.6 V, these results give an important clue for the development of new electrode materials.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.35-42
• /
• 2011

In this study, ground calcium carbonate (GCC) was modified by Layer-by-Layer (LbL) multilayering with polyelectrolytes. Cationic polyacrylamide (C-PAM) and poly sodium 4-styrene sulfonate (PSS) were used as cationic and anionic polyelectrolytes to modify GCC. The characteristics of the modified GCC were examined in terms of zeta potential and particle size with the addition level of polyelectrolyte and layer number. The GCC could form an assembly of cationic and anionic polyelectrolytes through consecutive adsorption process. The zeta potential of the modified GCC moved toward the cationicity and reached the plateau with the increase of the addition level of C-PAM. With layering of anionic PSS, the GCC had the negative charge. The particle size was dependent on the zeta potential. It was also observed by optical microscope. As the PSS was in the presence of the outermost layer, the GCC showed the better dispersability. It indicated that the surface charge and particle size can be controlled by adjusting the addition level of polyelectrolyte and the layer number.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.7
• /
• pp.1027-1036
• /
• 2020

Stipa purpurea is a unique and dominant herbaceous plant species in the alpine steppe and meadows on the Qinghai-Tibet Plateau (QTP). In this work, we analyzed the composition and diversity of the culturable endophytic fungi in S. purpurea according to morphological and molecular identification. Then, we investigated the bioactivities of these fungi against plant pathogenic fungi and 1-aminocyclopropane-1-carboxylate deaminase (ACCD) deaminase activities. A total of 323 fungal isolates were first isolated from S. purpurea, and 33 fungal taxa were identified by internal transcribed spacer primers and grouped into Ascomycota. The diversity of endophytic fungi in S. purpurea was significantly higher in roots as compared to leaves. In addition, more than 40% of the endophytic fungi carried the gene encoding for the ACCD gene. The antibiosis assay demonstrated that 29, 35, 28, 37 and 34 isolates (43.9, 53.1, 42.4, 56.1, and 51.5%) were antagonistic to five plant pathogenic fungi, respectively. Our study provided the first assessment of the diversity of culture-depending endophytic fungi of S. purpurea, demonstrated the potential application of ACCD activity and antifungal activities with potential benefits to the host plant, and contributed to high biomass production and adaptation of S. purpurea to an adverse environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.583-588
• /
• 2017

Thermal batteries are used in military power sources that require robustness and long storage life for applications in missiles and torpedoes. $FeS_2$ powder is currently used as a cathode material because of its high specific energy density, environmental non-toxicity, and low cost. $MS_2$ (M = Fe, Ni, Co) cathodes have been explored as novel candidates for thermal batteries in many studies; however, the discharge characteristics (1, 2, 3 plateau) of single cells in thermal batteries with different cathodes have not been elucidated in detail. In this study, we independently analyzed the discharge voltage and calculated the total polarizations of single cells using $MS_2$ cathodes. Based on the results of this study, we propose $NiS_2$ as a potential cathode material for use in thermal batteries.

• YAKHAK HOEJI
• /
• v.22 no.4
• /
• pp.201-206
• /
• 1978

The analysis of elemental sulfur by polarography has already been reported in the literature. Only a discussion of the more important factors influencing the analysis is here presented. (1) The effects of pH on the reduction of elemental sulfur are pronounced and the use of buffered solutions for the analysis of elemental sulfur is necessary. The authors found that a pH of 4-6 was found to be reproducible polarograms by use of D.C. polarograph. However, in alkali solvents the plateau of elemental sulfur has a pronounced dip if the concentration of sulfur is as much as 30ppm. (2) A.C. polarographic method shows a very high sensitivity in the case of sulfur reduction, so that the very low concentration of sulfur can easily be determined (about 1ppm). (3) The characteristics of sulfur wave can be formulated according to Stackelberg-Hauck-Hans equation. It was found that the curve of the peak potential of elemental sulfur in A.C. polarography versus logarithm of sulfur concentration was obtained to be straight line with the slope of 29.6 millivolts. This result was well agreed with theoretical consideration. (4) It was assumed that this polarographical methods were applicable to micro-analysis of elemental sulfur in crude oil and its petrochemical products, precipitated sulfur, and sulfur ointments with accuracy and rapidity.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.779-789
• /
• 2013

This study aimed to investigate the emulsifying properties of bovine lactoferrin in food emulsion system. First, lactoferrin solution was prepared to study its surface activities, such as surface adsorption characteristics and ${\zeta}$-potential. Second, some physicochemical properties of lactoferrin emulsion which resulted from variations of environmental conditions (i.e., pH or NaCl addition) were determined. As for surface adsorption characteristics evaluated by surface tension, it was decreased with increasing lactoferrin concentration in solution ($1{\times}10^{-5}{\rightarrow}0.2wt%$) and showed a plateau (${\fallingdotseq}44$mN/m) above 0.01 wt%. It was also changed with pH and the minimum value of 53.8 mM/m was observed at pI of lactoferrin. This was related to changes in ${\zeta}$-potential of the lactoferrin solution with respect to pH. Fat globule size of lactoferrin emulsion was decreased with increasing lactoferrin concentration and a stable emulsion was formed above 0.5 wt% lactoferrin in emulsion with fat globule size $d_{32}$ of ca. 0.33 ${\mu}m$ as confirmed by creaming stability experiment (i.e., Turbiscan). As with surface tension, fat globule size of lactoferrin emulsion also changed with pH and showed a maximum value at pI. As evaluated by Turbiscan, in the presence of NaCl, the lactoferrin emulsion showed instability in particular above 10 mM.