• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2104-2113
• /
• 2004

Surface degreasing method with premixed flame is proposed as the removal method of adherent impurities on materials. Effects of adherent molecular thickness and surface potential energy on evaporation rate of adherent molecules and molecular evaporation mechanism were investigated and discussed in the present study. Evaporation processes of adherent molecules on surface molecules were simulated by the molecular dynamics method to understand thermal phenomena on evaporation processes of adherent molecules by using high temperature gas like burnt gas. The calculation system was composed of a high temperature gas region, an adherent molecular region and a surface molecular region. Both the thickness of adherent molecules and potential parameters affceted the evaporation rate of adherent molecules and evaporation mechanism in molecular scale.

• 한국수자원학회논문집
• /
• 제42권2호
• /
• pp.117-129
• /
• 2009

전지구적 기온상승으로 인해 증발량이 증가할 것으로 예견되었으나, 다양한 지역에서 관측된 팬증발량은 지난 수십 년간 뚜렷한 감소추세를 나타내고 있다. 본 연구에서는 1960년부터 2007년까지 관측된 국내 18개 기상관측소의 팬증발량과, 증발에 관련된 강수량, 온도, 상대습도, 풍속, 일조시간, 일조율에 대한 변화를 분석하였다. 분석결과 팬증발량은 뚜렷한 감소현상을 나타내었으며, 강수량과 온도는 증가추세를, 상대습도, 풍속, 일조시간, 일조율은 감소추세를 나타내었다. 특히, 일조시간과 일조율의 감소추세는 팬증발량과 지역적으로 상당히 일치하고 있음을 확인하였다. 산점도를 그려 상관관계를 확인해본 결과, 일조시간과 일조율은 팬증발량과 양의 상관관계를 강하게 나타내고 있으며, 강수량의 경우는 팬증발량과는 음의 상관관계가 존재하였다. 강릉관측소 사례연구에서 Penman공식에 의해 추정된 개방된 수면에서의 증발량은 팬증발량에서 보인 것 같은 뚜렷한 하향추세가 검증되지 않아, 기존에 팬증발량 관측값으로부터 증발량을 추정하는 것은 장기적인 증발량 변화를 검토하기 위해서는 부적절함을 확인하였다. 마지막으로 팬증발량이 실제증발량과 서로 상호보완적 관계를 갖기 때문에, 팬증발량이 감소하더라도 실제증발량은 증가할 수 있음을 설명하였다.

• 농업과학연구
• /
• 제8권2호
• /
• pp.195-202
• /
• 1981

회개, 수자원획(水資源劃) 등(等) 이수(利水)를 목적(目的)으로 하는 장기유출해석(長期流出解析)에 있어 가장 중요(重要)한 인자(因子) 중(中)의 하나인 유역증발산량(流域蒸發散量)을 Water budget방법(方法)에 의(依)하여 산정(算定)하여, Pan, Potential, Regional evaporation과 Temperature와의 관계(關係)를 구명(究明)하여 유출기록(流出記錄)이 없는 무계기(無計器) 지역(地域)의 유역증발산량(流域蒸發散量)과 장기유출량(長期流出最)을 추정(推定)하기 위하여 금강수계(錦江水系) 용담지점(龍潭地點)의 5 개년(個年) 자료(資料)를 분석(分析)한 결과(結果)는 다음과 같다. 1. Pan evaporation과 River basin evaporation과의 비(比)($E_w/E_{pan}$)가 계절별(季節別) 성향(性向)을 가장 질서(秩序)있게 나타났으며, Pan evaporation으로부터 River basin evaporation을 Fig. 9 또는 Table-7로부터 추정(推定)할 수 있다. 2. Penman의 Potential evaporation을 적용하기 위하여 cloudness effect와 Wind function의 지역상수(地域常數)를 결정한 결과, 용담지역(龍潭地域)의 지역상수(地域常數)는 다음과 같다. $R_A=R_C(0.13+0.52{\frac{n}{D}})$ $E_a=0.35(e_s-e)(1.8+1.0U)$ 3. Regional evaporation [$E_R=(1-a)R_C-E_P$]는 유도과정의 가정에 따른 functional error가 큰 것으로 보여지나, 유역(流域)전반의 물리(物理), 화학(化學), 생물학적(生物學的)인 증발(蒸發)기구를 포괄적(包括的)으로 포용(包容)하고 있는 이와같은 이론적(理論的)인 함수개발(函數開發)이 요망된다. 4. 기상자료(氣象資料)가 미비(未備)한 지역(地域)에서는 기온(氣溫)만으로 Fig-11과 같이 개락적(槪略的)인 월(月) 평균(平均) 증발산(蒸發散)을 구(求)할 수 있다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.75-81
• /
• 2008

The water shortage in mega cities in Asia, which face a rapid growth in urban population, is an outstanding problem. It is important, therefore, to accurately estimate the water balance in each city in order to use the limited water resources effectively. In this study, we estimated the potential water resources in し sixteen mega cities in Asia. The target cities were Delhi and Calcutta, India; Colombo, Sri Lanka; Dhaka, Bangladesh; Yangon, Myanmar; Bangkok, Thailand; Kuala Lumpur, Malaysia; Singapore; Jakarta, Indonesia; Hanoi, Vietnam; Beijing and Hong Kong, the People's Republic of China; Seoul, the People's Republic of Korea; Manila, the Philippines, and Sapporo and Tokyo, Japan. The potential water resources were estimated by subtracting the actual evaporation from the amount of rainfall. The actual evaporation was estimated using the potential evaporation obtained by Hamon's equation which requires the air temperature and the possible hours of sunshine. When the results of Hamon's and Penman's evaporation equations were compared, a considerable error appeared in the low latitude region. The estimation using Hamon's equation was corrected with the linear regression line of Hamon's and Penman's equations. A classification of the land cover was carried out based on satellite photographs of the target cities, and the volume of surface runoff for each city was obtained using the runoff ratios which depended on the land cover. As a result, the potential water resources in the above mega cities in Asia were found to be greater than the world average. However, the actual water resources which are available for one person to use are probably very limited.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.427-435
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There's a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07m3m-3 for sand, 0.l1m3m-3 for loam, 0.12 for clay, and 0.13m3m-3 for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)'s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter. Key words : SMAP(Surface Moisture Availability Parameter), Paddy field, Volumetric soil water content, Evaporation, Capillary potential.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.140-150
• /
• 1996

CFC-12, which has been used most widely in automobile air conditioners and household refrigerators is scheduled to be phased out soon because of its high ozone depletion potential. Now HFC-134a is suggested as an alternative refrigerant for CFC-12. In this Study, we intended to investigate how PAG oil influence evaporation heat transfer and flow pattern, using R-134a and PAG oil influences evaporation heat transfer and flow pattern, using R-134a and PAG oil in the horizontal miro-fin evaporation tube. Experiments were conducted under the flowing est conditions : mass velocity 86-250kg/$m^2$s, heat flux 5-30 ㎾/$m^2$, oil concentration 0-21 wt.% and saturation temperature 5$^{\circ}C$. Local evaporation heat transfer coefficients were found to be higher at the top, side and bottom of the tube in this order. Average heat transfer coefficients turned out to increase with oil concentration increment up to 3 wt.% oil concentration, whereas heat transfer coefficients gradually decreased over 3 wt.% oil concentration, because of oil-rich liquid film was formed on the heat transfer surface. Flow patterns were rapidly transitioned to annular regimes up to 3 wt.% oil concentration. In case of pure refrigerant, measured heat transfer coefficients in the experiments were similar to those of Kandlikar＇s correlation.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1246-1252
• /
• 1993

본 연구에서는 CWS액적을 대상으로 주위 분위기 조건등에 대하여 점화등의 연소현상을 평가하기 위한 실험장치를 구성하고 일련의 실험을 수행하였다.

• 한국토양비료학회지
• /
• 제45권4호
• /
• pp.484-491
• /
• 2012

The hydrological components of a sandy loam soil of nearly level in Chuncheon over 30 years were computed using the E-DiGOR model. Daily simulations were carried out for each year during the period of 1980 to 2009 using standard climate data. Reference evapotranspiration and potential soil evaporation based on Penman-Montheith model were higher during May to August because of the higher atmospheric evaporative demand. Actual soil evaporation was mainly found to be a function of the amount and timing of rainfall, and presumably soil wetness in addition to atmospheric demand. Drainage was affected by rainfall and increased with a higher amount of precipitation and soil water content. Excess drainage occurred throughout rainy months (from July to September), with a peak in July. Therefore, leaching may be a serious problem in the soils all through these months. The 30-year average annual reference evapotranspiration and potential soil evaporation were 951.5 mm and 714.2 mm, respectively. The actual evaporation from bare soil varied between 396.9-528.4 mm and showed comparatively lesser inter-annual variations than drainage. Annual drainage rates below 120 cm soil depth ranged from 477.8 to 1565.9 mm. The long-term mean annual drainage-loss was approximately two times higher than actual soil evaporation.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.115-115
• /
• 2003

Silica nanostructures have been attached considerable attention because of theirs potential application in mesoscopic research and the potential use of large surface area structure of catalysts. SiO2 nannowire and nanorods was synthesized various methods including thermal evaporation, chemical vapor deposition (CVD), and laser ablation methods. In this experiments, SiO2 nanowire were grown using thermal evaporation method followed by VS (Vapor-Solid) growth mechanisms. Grown SiO2 nanowires were amorphous phases because of its low growth temperatures. Grown nanowires diameters were about 20-40nm at all growth conditions, but its microstructres were different by that used substrate because of it's oxygen contents.

• 설비공학논문집
• /
• 제16권3호
• /
• pp.203-210
• /
• 2004

This paper describes the potential advantages in applying evaporative cooling to air-cooled condensers. The cooling characteristics of an air-cooled condenser with its surface fully covered with thin water film are investigated and compared with that of an air-cooled condenser with usual dry surface. By applying the evaporative cooling, the cooling performance of the condenser is shown to improve enormously. When the outdoor air is 35$^{\circ}C$ and 40% in relative humidity, the condensing temperature of the refrigerant is decreased by 2$0^{\circ}C$. Even when the incoming air is fully saturated with water vapor, the evaporation from the wet surface occurs to cause a decrease in the condensing temperature by 1$0^{\circ}C$. The main reason for this improvement is assessed as the addition of an efficient cooling mechanism which is the water evaporation resulting in latent heat absorption.