• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.297-309
• /
• 2020

Coronaviruses were originally discovered as enzootic infections that limited to their natural animal hosts, but some strains have since crossed the animal-human species barrier and progressed to establish zoonotic diseases. Accordingly, cross-species barrier jumps resulted in the appearance of SARS-CoV, MERS-CoV, and SARS-CoV-2 that manifest as virulent human viruses. Coronaviruses contain four main structural proteins: spike, membrane, envelope, and nucleocapsid protein. The replication cycle is as follows: cell entry, genome translation, replication, assembly, and release. They were not considered highly pathogenic to humans until the outbreaks of SARS-CoV in 2002 in Guangdong province, China. The consequent outbreak of SARS in 2002 led to an epidemic with 8,422 cases, and a reported worldwide mortality rate of 11%. MERS-CoVs is highly related to camel CoVs. In 2019, a cluster of patients infected with 2019-nCoV was identified in an outbreak in Wuhan, China, and soon spread worldwide. 2019-nCoV is transmitted through the respiratory tract and then induced pneumonia. Molecular diagnosis based on upper respiratory region swabs is used for confirmation of this virus. This review examines the structure and genomic makeup of the viruses as well as the life cycle, diagnosis, and potential therapy.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.207-213
• /
• 2022

LNG CCS which is a special type of cargo hold operated at -163℃ for transporting liquefied LNG is composed of a primary barrier, plywood, insulation panel, secondary barrier, and mastic. Currently, glass fiber is used to reinforce polyurethane foam. In this paper, we evaluated the possibility of replacing glass fiber-reinforced polyurethane foam with basalt fiber-reinforced polyurethane foam. We conducted a thermal conductivity test to confirm thermal performance at room temperature. To evaluate the mechanical properties between basalt and glass-fiber-reinforced polyurethane foam which is fiber content of 5 wt% and 10 wt%, tensile and an impact test was performed repeatedly. All of the tests were performed at room temperature and cryogenic temperature(-163℃) in consideration of the temperature gradient in the LNG CCS. As a result of the thermal conductivity test, the insulating performance of glass fiber reinforced polyurethane foam and basalt fiber reinforced polyurethane foam presented similar results. The tensile test results represent that the strength of basalt fiber-reinforced polyurethane foam is superior to glass fiber at room temperature, and there is a clear difference. However, the strength is similar to each other at cryogenic temperatures. In the impact test, the strength of PUR-B5 is the highest, but in common, the strength decreases as the weight ratio of the two fibers increases. In conclusion, basalt fiber-reinforced polyurethane foam has sufficient potential to replace glass fiber-reinforced polyurethane foam.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.262-275
• /
• 2024

In Indonesia, Coptotermes curvignathus Holmgren and Cryptotermes cyanocephalus Light termite attacks can damage wood and causing losses of 8.7 trillion rupiah per year. Wood treatment and soil barrier are very important to protect structures and their components from termite infestation. The application of synthetic chemicals that pose risks to the environment and human health. The growing movement to replace these chemicals with new termiticides that are safe for the environment in place of persistent organic pollutants. Efficacy performance in entomopathogenic fungi spores such as that produce decanoic acid, hexadecanoic acid, palmitic acid, and octadecadienoic acid are potential compounds that provide for ecofriendly termite control. Entomopathogenic fungal spores from Metarhizium anisopliae, Trichoderma harzianum, and Beauveria bassiana, as the active ingredient were formulated with nanocellulose was added as an inert ingredient to which helped to deliver the active ingredients on controlling the target pest, and enhance the utility ability of the product fungi to control termites. The mortality of these termites successively entomopathogenic fungi was the main cause of death. The higher concentrations being associated with of nanocellulose used affect increased the number of termites mortality. M. anisopliae paired with 60% nanocellulose concentrate was the best percentage for yielded the greatest C. curvignathus and C. cynocephalus termite control. In the field testing, M. anisopliae provided better, it showed the finest result of termite control rather than B. bassiana and T. harzianum. The results of the research indicate that entomopathogenic fungi can be used for Pest Control Management as the subterranean termite and drywood termite control.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1349-1354
• /
• 2010

The geometries and isomerization of the alkylidene silylenoid $H_2C$ = SiLiF as well as its insertion reactions with R-H (R = F, OH, $NH_2$) have been systematically investigated at the B3LYP/6-311+$G^*$ level of theory. The potential barriers of the three insertion reactions are 97.5, 103.3, and 126.1 kJ/mol, respectively. Here, all the mechanisms of the three reactions are identical to each other, i.e., an intermediate has been formed first during the insertion reaction. Then, the intermediate could dissociate into the substituted silylene ($H_2C$ = SiHR) and LiF with a barrier corresponding to their respective dissociation energies. Correspondingly, the reaction energies for the three reactions are -36.4, -24.3, and 3.7 kJ/mol, respectively. Compared with the insertion reaction of $H_2C$ = Si: and R-H (R = F, OH and $NH_2$), the introduction of LiF makes the insertion reaction occur more easily. Furthermore, the effects of halogen (F, Cl, Br) substitution and inorganic salts employed on the reaction activity have also been discussed. As a result, the relative reactivity among the three insertion reactions should be as follows: H-F > H-OH > H-$NH_2$.

• Korean Journal of Agricultural Science
• /
• v.43 no.1
• /
• pp.14-20
• /
• 2016

One of the most powerful health management practices is the use of antibiotics, but their use is being restricted because of health safety issues. The swine industry has been looking for various alternatives to antibiotics and increasingly considers the use of dietary factors like feed ingredients, feed additives, feed formulation practices, or feeding methods, instead of using antibiotics to improve pig health and performance. Among other alternatives to antibiotics, spray-dried plasma may be a candidate. Spray-dried plasma is a blood product that provides bioavailable nutrients and physiologically active components such as immunoglobulins, glycoproteins, growth factors, peptides, etc. It is an excellent protein source with balanced and highly digestible amino acids. Several beneficial physiological activities depend on components of spray-dried plasma, such as immune competence (antibacterial activity), modulation of microbiota and/or immune system, integrity of intestinal barrier function, etc. These beneficial effects can contribute to improvement of pig performance and health by modulation of microbiota in the digestive tract and/or immune system. Therefore, it is suggested that spray-dried plasma has great potential as an antibiotics alternative.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.170-170
• /
• 2009

From the analysis of current density-luminance-voltage characteristics of the double layered device in ITO/N,N'-diphenyl-N-N'bis(3-methylphenyl)-1,1'biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al, we divided the conductive mechanism by four region according to applied voltage. We have obtained a coefficient of ${\beta}_{ST}$ in schottky region (I) is $4.14{\times}10^{-24}$ at the electric field of $3.2{\times}10^5$ V/cm, a slope in negative resistance region (II) appears negative properties decreasing the current density J for proportional in -1.58 square at a electric field of $7.3{\times}10^5$ V/cm. A coefficient of ${\beta}_{PF}$ in Poole-Frenkel region (III) is $8.28{\times}10^{-24}$ at the electric field of $8.4{\times}10^5$ V/cm, it was confirm어 that ${\beta}_{PF}$ is agrees with a value that relates with ${\beta}_{ST}$ such as ${\beta}_{PF}=2{\beta}_{ST}$ as the ${\beta}_{PF}$ and 2 ${\beta}_{ST}$ satisfied a theoretical prediction. And it was obtained a potential barrier of ${\Phi}_{FN}$ in Fower-Nordheim region(IV) is 0.3 eV at the electric field of $11.2{\times}10^5$ V/cm.

• Journal of Haehwa Medicine
• /
• v.28 no.2
• /
• pp.41-47
• /
• 2019

Objectives : Atopic dermatitis is an irritable skin disease accompanying rash and itching leading to impaired skin barrier. ATO-ALL is an ethanol extract of natural products comprising 12 herbs and effective on atopic dermatitis. In this study, we aimed to propose that the effect of ATO-ALL on skin regeneration in human keratinocyte cell line, HaCaT cells. Methods : To evaluate the skin regenerating effects of ATO-ALL, scratch wound healing assay, bromodeoxyuridine (BrdU) assay, and propidum iodide (PI) assay were performed using cultured HaCaT cell line. Result : Scratch wound healing assay showed that ATO-ALL was able to enhance the gap filling activity more than 2-fold at 7 ppm concentration compared with control group. BrdU assay demonstrated that ATO-ALL treatment increased the de novo cell proliferation in a dose-dependent manner. Finally, PI assay indicated that the cell cycle of HaCaT cells was modulated by ATO-ALL treatment. Conclusions : These results suggested that ATO-ALL may have skin regenerating effects by increasing cell proliferation via cell cycle regulation. Taken together, ATO-ALL is supposed to have a potential on regeneration of damaged skin or functional disease including atopic dermatitis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.9-19
• /
• 2002

By using the thermionic emission model, the L-I-V(power-current-voltage) characteristics of a SCH(seperate confinement heterostructure) QW(quantum well) laser diode is analytically derived. We derived the relationships between the bulk carrier density of SCH regions and the confined carrier density of QW. The L-I-V characteristics is derived analytically by using current continuity equations. Solving the ambipolar diffusion equation under the condition of high level injection and charge neutrality, the current distribution in the SCH regions is considered. Results showed that the major factor affecting the laser I-V characteristics was the change of potential barrier at the cladding-SCH interface. Also the series resistance of a laser diode was decreased and the carrier injection was increased by increasing the forward flux of injection current from cladding to SCH region.