• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.357-362
• /
• 2011

Air springs are prevalently used as suspension in train. However, air springs are seldom used in automobiles where they improve stability and comfort by enhancing the impact-relief, breaking, and cornering performance. Thus, this study proposed a new method to analyze air springs and obtained some reliable design parameter which can be utilized in vehicle suspension system in contrast to conventional method. Among air spring types of suspension, this study focused on sleeve type of air spring as an analysis model since it has potential for ameliorating the quality of automobiles, specifically in its stability and comfort improvement by decreasing the shock through rubber sleeve. As a methodology, this study used MARC, as a nonlinear finite element analysis program, in order to find out maximum stress and maximum strain depending on reinforcement cord's angle variation in sleeves. The properties were found through uniaxial tension and pure shear test, and they were developed using Ogden Foam which is an input program of MARC. As a result, the internal maximum stresses and deformation according to the changes of cord angle are obtained. Also, the results showed that the Young's modulus becomes smaller, then maximum stresses decrease. It is believed that these studies can be contributed in automobile suspension system.

• Korean Journal of Veterinary Research
• /
• v.38 no.3
• /
• pp.553-558
• /
• 1998

Using the previous established multiplex PCR (mPCR), the presence of six kinds of staphylococcal superantigen (SAg) genes was investigated for nineteen Staphylococcus aureus isolates from the commercialized meat sources. As a result, only one isolate from pork among 19 S aureus isolates (5.3%) was confirmed as a potential SAg producer and harbored sec gene. The results in this study suggest that meat may not be major contagion of staphylococcal food poisoning (SFP) in Korea and that staphylococcal enterotoxin type C may be associated with the disease. Also, the mPCR method in this study can be a useful genotypic method which can overcome the typical disadvantages of conventional antibody-based methods due to antigenic homology, and furthur survey on food-borne S aureus isolates can provide the important epidemiological data for SFP in Korea.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.796-801
• /
• 2008

$LaGaO_3$ thin film was prepared on Ni-Fe metal porous substrate by Pulsed Laser Deposition method. By the thermal reduction, the dense $NiO-{Fe_3}{O_4}$ substrate is changed to a porous Ni-Fe metal substrate. The volumetric shrinkage and porosity of the substrate are controlled by the reduction temperature. It was found that a thermal expansion property of the Ni-Fe porous metal substrate is almost the same with that of $LaGaO_3$ based oxide. $LaGaO_3$ based electrolyte films are prepared by the pulsed laser deposition (PLD) method. The film composition is sensitively affected by the deposition temperature. The obtained film is amorphous state after deposition. After post annealing at 1073K in air, the single phase of $LaGaO_3$ perovskite was obtained. Since the thermal expansion coefficient of the film is almost the same with that of LSGM film, the obtained metal support LSGM film cell shows the high tolerance against a thermal shock and after 6 min startup from room temperature, the cell shows the almost theoretical open circuit potential.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.490-495
• /
• 2003

In steel-making process of iron and steel industry, the purity and quality of steel can be dependent on the amount of CO contained in the molten metal. Recently, the supersonic oxygen jet is being applied to the molten metal in the electric furnace and thus reduces the CO amount through the chemical reactions between the oxygen jet and molten metal, leading to a better quality of steel. In this application, the supersonic oxygen jet is limited in the distance over which the supersonic velocity is maintained. In order to get longer supersonic jet propagation into the molten metal, a supersonic coherent jet is suggested as one of the alternatives which are applicable to the electric furnace system. It has a flame around the conventional supersonic jet and thus the entrainment effect of the surrounding gas into the supersonic jet is reduced, leading to a longer propagation of the supersonic jet. In this regard, gasdynamics mechanism about why the combustion phenomenon surrounding the supersonic jet causes the jet core length to be longer is not yet clarified. The present study investigates the major characteristics of the supersonic coherent jet, compared with the conventional supersonic jet. A computational study is carried out to solve the compressible, axisymmetric Navier-Stokes equations. The computational results of the supersonic coherent jet are compared with the conventional supersonic jets.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.145-145
• /
• 2017

음극재에 사용되는 타이타니아 나노튜브($TiO_2$ nanotubes)는 높은 종횡비를 가지고 있으며, 기계적인 강도가 우수하고 화학적인 안정성이 높다. 그러나 낮은 전기전도도와 상대적으로 넓은 밴드갭(bandgap)은 다양한 활용 분야에 이 물질이 활용되는 것을 제한하고 있는 상황이다. 전기 화학적 분야에서 광화학 반응 또는 과전압에서 밴드갭을 줄이기 위한 타이타니아 나노튜브의 나노 구조 변형에 대한 많은 연구가 있어왔다. 본 연구에서는 산화 몰리브덴(Molybdenum oxide)을 촉매로 사용하여 타이타니아 나노튜브에 전기충격법을 이용하여 도핑했다. 생성된 타이타니아 나노튜브를 $450^{\circ}C$에서 1시간 30분 동안 가열하여 타이타니아 나노구조를 아나타제(anatase) 구조로 변형켰다. 타이타니아 나노튜브의 구조적인 변화를 scanning electron microscopy(SEM), energy-dispersive X-ray spectroscopy(EDS) 등을 통해 측정했고 UV-Visiblespectroscopy를 통해 도핑된 타이타니아 나노튜브의 밴드갭을 측정하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 기존의 타이타니아 나노튜브가 가지는 밴드갭인 3.0 ~ 3.2eV 범위보다 더 낮아진 2.6 ~ 2.8eV의 범위를 가지는 것을 확인하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 다양한 광촉매 분야에 적용될 수 있을 것으로 예상된다.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.914-920
• /
• 2014

Triple-negative breast cancer (TNBC) possesses a higher rate of distant recurrence and a poorer prognosis than other breast cancer subtypes. Interestingly, most of the heat shock protein 90 (Hsp90) client proteins are oncoproteins, and some are closely related to unfavorable factors of TNBC patients. 17-Demethoxy-reblastatin (17-DR), a novel non-benzoquinone-type geldanamycin analog, exhibited potent Hsp90 ATPase inhibition activity. In this study, the anticancer effects of 17-DR on TNBC MDA-MB-231 cells were investigated. These results showed that 17-DR inhibited cell proliferation, induced apoptosis, and suppressed cell invasion and migration in the MDA-MB-231 cells. Down-regulation of the key Hsp90-dependent tumor-driving molecules, such as RIP1 and MMP-9, by 17-DR may be related to these effects. Taken together, our results suggest that 17-DR has potential as a therapeutic agent for the treatment of TNBC.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.48.2-48.2
• /
• 2013

We present the near-infrared spectra (2.5-5.0 um) of shocked $H_2$ gas, observed with the Infrared Camera onboard the satellite AKARI. Two supernova remnants, IC 443 and HB 21, were observed. IC 443 shows a hint of non-equilibrium ortho-to-para ratio (OPR): 2.4 (-0.2, +0.3). HB 21 also shows an indication of a potential non-equilibrium OPR: 1.8-2.0. These non-equilibrium OPRs are first reported for shocked $H_2$ gas at E(v,J) > 7000 K, as far as we are aware. We concluded that the non-equilibrium OPR probably originates from dissociative J-shocks, considering several factors such as the shock combination requirement, the line ratios, and the possibility that $H_2$ gas can form on grains with a non-equilibrium OPR. The difference in the collision energy of H atoms on grain surfaces would give rise to the observed difference between the OPRs of IC 443 and HB 21, if dissociative J-shocks are responsible for the $H_2$ emission. Our study suggests that shocked-then-cooled $H_2$ gas may play as a heat reservoir with the non-equilibrium OPR.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.330-336
• /
• 2012

FCEV uses 250 ~ 450 V instead of using 12 V battery. High voltage vehicle can cause electric shock, fire and explosion accident. Therefore, it has potential factors that can cause hazard of safety for users. United states of America and Europe legislate regulations such as ECE R100, FMVSS 305 for regulating electrical safety during driving or after collision. The company manufacturing high voltage components must do advanced R&D about Method for improving and confirming the safety of high voltage. We develop the specific hardware components of high voltage wiring system for the power train system and power supply system of Hyundai Motors FCEV. This paper shows test method of insulative performance for securing the electrical safety of high voltage components such as power cable, connectors and buss-bar, and proposals the guide line value for human safety of FCEV according to the test result of our development components.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.13-17
• /
• 2014

In this paper, the risk of electric shock is analyzed through analysis for characterization of potential distribution analysis and ground fault current analysis near the area where there are occurred a ground fault at electric vehicle wireless charging system using 20kHz. Studies for electric vehicle wireless charging system are in the works for development of efficiency increase, pickup shape design and communication module as a fundamental research step. But the research related to electrical safety and is still scarce state so that more studies are necessary to commercialize. As a result of analysis, it is verified that induced voltage is arisen more up to 45V near the a area of accident during ground fault and fault current has been maintained continuously without clearing fault condition by operating characteristics for circuit breaker and inverter.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.29 no.2
• /
• pp.145-152
• /
• 2014

The variation in the level of immune response related gene expression in silkworm, Bombyx mori following infection with Bombyx mori nucleopolyhedrovirus (BmNPV) was analyzed at different time intervals. The occlusion bodies of BmNPV orally inoculated to the two most divergent silkworm races viz., Sarupat (resistant to BmNPV infection) and CSR2 (susceptible to BmNPV infection) were subjected to oral BmNPV inoculation. The expression profile of gp 41 gene of BmNPV in the Sarupat and CSR2 races revealed that the virus could invade the midguts of both susceptible and resistant races. However, its multiplication was significantly less in the midgut of resistant race, while, in the susceptible race, the viral multiplication reached maximum level within 12 h. These findings indicate that potential host genes are involved in the inhibition of viral multiplication within larval midgut. The immune response genes arylphorin, cathepsin B, gloverin, lebocin, serpin, Hsp 19.9, Hsp 20.1, Hsp 20.4, Hsp 20.8, Hsp 21.4, Hsp 23.7, Hsp 40, Hsp 70, Hsp90 revealed differential level of expression on NPV infection. The gloverin, serpin, Hsp 23.7 and Hsp 40 genes are significantly up-regulated in the resistant race after NPV infection. The early up-regulation of these genes suggests that these genes could play an important role in baculovirus resistance in the silkworm, B. mori.