• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.23-29
• /
• 2014

Less power consumption, lower cost, smaller size and more functionality are the increasing demands for consumer electronic devices. The three dimensional(3-D) TSV packaging technology is the potential solution to meet this requirement because it can supply short vertical interconnects and high input/output(I/O) counts. Cu(Copper) has usually been chosen to fill the TSV because of its high conductivity, low cost and good compatibility with the multilayer interconnects process. However, the CTE mismatch and Cu ion drift under thermal stress can raise reliability issues. This study discribe the thermal stress reliability trend for successful implementation of 3-D packaging.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1435-1439
• /
• 2009

Drainage noise with making think about what they do disturbs neighborhoods live under source of noise. elbow pipe built in the house. the general elbow pipe has a rectangular elbow because of easiness when the plan set up or executing. therefore, free falling fluid impacts on the wall of the elbow pipe almost at one point. in this paper, to disperse the potential energy, the shock decentralizes from tiny area to large area. And It is considered how the characteristics change according to the noise of transformed shape of pipe, then researched the effectiveness of transformed pipe configuration.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.127-129
• /
• 2007

It is well known that water vapor maser emission at 22.2 GHz is associated with the earliest stages of both low- and high-mass star formation and it can be considered a reliable diagnostic of their evolutionary state. Bright Rimmed Clouds (BRCs) are clouds that have been compressed by an external ionization-shock front which focuses the neutral gas into compact globules. The boundary layer between the neutral gas and the gas ionized by the incident photons is often called "bright rim" but the clumps are sometimes classified also as speck globules or cometary globules depending on their appearance. Small globules with bright rims have been considered to be potential sites of star formation and have been studied in several individual regions. We present results from high resolution VLA observations searching for new candidates of recent star formation in bright-rimmed clouds/globules associated with IRAS point sources.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.529-534
• /
• 2009

This paper reports a non-photorealistic rendering method for creating stream pattern from an input image. Our method extracts potential stream pattern in the given image. The proposed approach uses a shock filter based on a partial difference equation(PDE) which is implemented by applying a selective dilation and erosion processes. However, unlike the traditional first order solution to the PDE, we employ a second order scheme and compensate for the undesired diffusive effects caused by a viscosity form. The selection of dilation or erosion for a pixel is based on an edge detector computed from a structure tensor. By adding noises on to the input image, our method also can generate stream pattern even if there is less texture in some area. The experimental results show that the stream pattern is extracted very well.

• Journal of Chest Surgery
• /
• v.27 no.12
• /
• pp.1031-1035
• /
• 1994

Mechanical valve thrombosis is a serious and potential lethal complication unless early diagnosis & prompt therapy are made. We have been experienced 3 cases of valve thrombosis. From Aug. 1988 to July 1994, reoperations of mitral valve replacement [MVR] with mechanical prostheses [all mitral] were performed in three patients[2 men, 1 woman] due to valve thromboses. All three patients were diagnosed by means of cineradiography. Preoperative status of was shock status and he was applied intra-aortic balloon pump [IABP]. All three cases of prosthetic valve failure [PVF] were treated by Redo-MVR. Time intervals of reoperations were 5months, 40months, and 35months, respectively. In all cases, valve thromboses were excised successfully. Cineradiography provided an accurate diagnosis in all cases, which was utilized as safe, reliable & noninvasive imaging modalities. There were no operative death & complication. All three patients were fully recovered and returned to their employements, and active lives.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.127-133
• /
• 1991

Acoustic microscopy has attracted much intrest recently as potential mondestructive evalution technique for detecting and sizing defects of surface and sub-surface. Also acoustic emission testing method has been developed for detecting microcracks which is more than 30 umm in length quintitatively on ceramics material. In the present paper, acoustic emission during the four point bending test in hot-pressed sintered Si$\_$3/N$\_$4/ specimen which was stressed bythermal shock has been measured by high sensitive sensing system. The surface and sub-surface cracks were detected by scanning acoustic microscope of 800 MHz and conventional ultrasonic testing in C-scope image. The purpose was to investigate the location and size of cracks by SAM and AE technique, whose experimental datas demontrates good agreement for detecting microcracks.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.2
• /
• pp.18-27
• /
• 2004

An axisymmetric supersonic jet is simulated at a Mach number 2.1 and a Reynolds numberof 70000 to identify the mechanism of Mach wave generation and radiation from the jet. In orderto provide the near-field radiated sound directly and resolve the large-scale vortices highly.high-resolution essentially non-oscillatory(ENO) scheme, which is one of the ComputationalAeroAcoustics(CAA) techniques, is newly employed. Perfectly expanded supersonic jet is selectedas a target to see pure shear layer growth and Mach wave radiation without effect of change injet cross section due to expansion or shock wave generated at nozzle exit. The sound field ishighly directional and dominated by Mach waves generated near the end of potential core. Thenear field sound pressure levels as well as the aerodynamic properties of the jet, such asmean-flow parameters are in fare agreement with experimental data.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1365-1367
• /
• 2000

In electric railway system, potential of rail has been risen, for return-current flows through rail. The magnitude of rising voltage is different to railway feed system, ground admittance of rail and the load current. If rising voltage of rail is large, electric shock can be occurred to passengers and maintenance-worker. In this paper, we estimate the rising voltage of rail in high speed railway system and check the safety to human beings.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.465-467
• /
• 1995

High impedance fault can not be easily detected by conventional method. But if it would not be detected and cleared quickly, it can result in fires, and electric shock. In this paper, ANN, which has learning capability, is used for high impedance fault detection. The potential of the neural network approach is demonstrated by simulation using KEPCO's measured data. Among ANN models used in this paper, CPN shows better result than BPN in respect of convergence and reliability.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.811-813
• /
• 1996

High impedance fault can not be easily detected by conventional method. But if it would not be detected and cleared quickly, it can result in fires, and electric shock. In this paper, neural network, which has learning capability, is used for high impedance fault detector. The potential of the neural network approach is demonstrated by simulation using KEPCO's measured data. The instantaneous values and frequency spectrum of current are respectively used as the inputs of neural networks. Also, the methods using combined data to exploit the advantage of each data are proposed. In this paper, back-propagation network(BPN) is used for high impedance fault detector and can use for high speed relay because it detects faults within 1 cycle.